Search the Community

Showing results for tags 'nb designer sysmac'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 314 results

  1. Hi there I was reading this thread: And trying to create 3 axes. 1 virtual axis and 2 real axis, I would like to use MC_GearIn for each real axes so both real ones follow  the virtual axis (so both can move in sync motion). But my question is: If I give Move cmd(Absolute or relative)to master virtual axis and since it's virtual, it is not going to move then how can the other real ones follow the master(assuming that it's literally electronic gearing).  Any help will be appreciated!
  2. Anyone know what could be missing to be able to import this stepper motor to sysmac? This is one of the supplied xml files for the stepper motor.     FASTECH_Ezi-SERVO2_EtherCAT - OMRON.xml

  3. GOT2000 Recipes

    psooy posted a topic in Mitsubishi

    Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi?  Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe.  Thanks in advie 
  4. Hi there This attached pic I got from Omron motion control manual. I am trying to wrap my head around it. Does it mean that the slave servo axis is gonna follow master encoder axis using GearIn FB?? If so, then Can we executive Move FB on encoder axis? Looking forward to your responses.  
  5. Hi. When i run the plc in the simulator, only certain stuff seems to work, most logic seems to work. Timers seems to refuse to start at all, the sim is in RUN mode using Sysmac 1.45 Standard edition.
  6. Hello. We are looking for a safety scanner that has CIP safety(Ethernet IP) or fSoE (Safety over etherCAT) that is combability with sysmac and NX102 cpu. There is a lot of safety scanners on the market that support CIP safety and fSoE and I have tried to load in both EDS  and ESI files into sysmac with no succes. Of course the best option would be that OS32C safety scanner from Omron themselves would have build in support for Cip safety at the moment it only support ethernetIP to read out data for diagnostics.   Is there anyone that is running a safety scanner with sysmac with CIP safety or fSoE ?  If you do I would be very happy to receive the brand from the safety scanner manufacture.   /Best regards.
  7. Hello Guys, I am using a nx102-9000 CPU and trying to communicate explicitly to a Telsonic Mag Generator. I have done this on a CJ2M & an Allen Bradley Processor successfully before but am struggling with sysmac. I will attach some screen shots of the AB message instruction because it is much more simple then the CJ2M (required pretty much a full function block made). If anyone wants to see the CJ2M block let me know. I am working right from the sysmac manual using the CIP OPEN, READ, SEND, & CLOSE. Once it is working I will write as well.  I am getting stuck right on the first part "CIP OPEN" I am using a route of '02\10.203.21.40' I am unsure what the 02\ means. I am just copying it from the example. The IP Is correct. Below is the picture of my 1C05 Error. Which in the manual is confusing because they have a 1C error and an 05 error separately.  Another question (once i can open a connection) is in the CIPRead the 'srcdat' I am not really sure what this is? Everything i've used before is an instance number, class, and attribute number (used in the CIPSend Logic From Allen Bradley MSG Instruction & Current Sysmac logic shown in pictures as well. Please let me know if you have any suggestions or need any additional information. Thanks, Kevin

  8. GOT MES Interface connection status

    sante123 posted a topic in Mitsubishi

    Hi, Is there any way to read current status of the MES Interface connection and show it on the screen? Recently I've had a situation when MES Interface wasn't able to reach a SQL Server (there was an error in the diagnostics window), but the "Access error notification setting" bit was 0.
  9. Dear all. I have the issued with Sysmac Studio 1.30. it can not show the Library setting and Library create. just show the reference only. can you pls help me this issued. Many thanks.
  10. Hi, I'm looking for help with the string exchanging between GT25 and AB CompactLogix. I'm reading recipe data from SQL via MES interface to the local devices such as GD3000. I want to move the string held in the registers GD3000-3009 (20 characters) to the string tag in the Allen Bradley. The problem is that in the scripting I cannot enter the AB Tag, because when I imported the CSV with the string tags their data type is STRING, and the scripting in GOT accepts only numerical datatypes such as WORD, etc. Has anyone found a way to handle that?
  11. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  12. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,

  13. How to use NB Data Logging

    Link068 posted a topic in Omron

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks
  14. Dear All. I have the issued with NX1P2 when read data from Modbus RTU. the Slave data using 2 INT for Real data. but in the Sysmac Studio I get the data is OK, 2 INT but can not convert to Real data. Can you pls help me to solve this issued. also I want to convert from Real to 2 INT to send the setting to salve. Many thanks.

  15. Crane Positioning

    Nico1976DK posted a topic in NJ Series / Sysmac Studio

    Hey folksI'm trying to make a Ladder program in Sysmac Studio to control a Crane.The crane gets via a HMI a position that it must drive to, first at high speed then in low speed this is controlled via encoder signal for fine positioning there are several sensors.For all this I have an NX1P2-9B24DT1, NX-EC0222 and 3G3MX2-A4030-ESomeone here who can help me with an example of how this can be done in Ladder.Many thanks in advance for your help.
  16. Hi. I have a decent workstation I work on when i do my programming. I have been using Sysmac studio for couple of years now and I have always notice it that sysmac studio is very slow.   Have you guys notice that sysmac in general is slow ? /Best regards.
  17. Hey Guys,  So i am working with Omron software to integrate it with the HMI screen.  Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it,  the alarm does not go away from the screen,  it is acknowledged though.    Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ??   Please help guys !!!
  18. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...

  19. CX-Designer || Get error history

    Stefan_CJ posted a topic in CX-Designer

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  20. Hey everyone, I did a quick search in here and couldn't find the answer to my question, so I'll post it here.  I am starting up a machine and adding/correcting alarms on the fly and came across an issue.  Some how a Internal variable  in one section of ladder has the same name as my global variable that I need to use and now I cannot put the global tag in that file.  Is there a way this can be done while the PLC is in run mode or do I have to go off line, delete the internal variable, add the global variable and then redownload?   PLC is NX100    
  21. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  22. I don't suppose there is anyway to modify the popup Alarm Notification?  I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up.  I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together....   Thanks,
  23. Hello Everyone,   Make - OMRON HMI Model - NB7W-TW01B Software - NB Designer   Suppose I have more than one number input display on a screen of HMI. When I touch and enter the data in any one of them and press enter, the keyboard not closing automatically. in sted of auto close, the cursor moves to the next number input display to enter the data. How to auto-close the keyboard after entering the data in any number input display.
  24. Hi Experts, I would like to know is there any possibility to make a switch that can make exponential increment to a data. i know how to make a switch to increment data in fixed intervals with a switch but im trying to make a switch when you press it continuesly it should increase the gains rapidly over time. is this possible and if yes can someone explain me how? im attaching a sample image how i want to make two buttons to increase and decrease a data. thank you in advance guys. kind regards, sathu.
  25. Hello all I am trying to figure out if its possible to save a screenshot of every screen on a HMI to usb at the same time, so i have currently created a button on a screen that saves the screenshot to external memory, is it possible to make it save a screenshot for every screen instead of just one? maybe i would have to create a kind of function on the plc that cycles through the pages and then takes a screenshot of each? any help would be appreciated currently using a NB7W and a CJ2 cpu 31 although it would be nice for this to work with everything