Search the Community
Showing results for tags 'mitsubishi servo drive'.
Found 468 results
-
Dear Member , I have programed high speed counting via PLC FX2n using code c252 , but it shovs me decimal like 23545 , so question is how can i make number to have decimal after point example 123.20 ?
-
3G3HV User's Manual View File Older Omron AC Drive Submitter Michael Walsh Submitted 10/03/17 Category Manuals
-
-
hi all, anyone can hep..i use servo mr j4.. now got error 121..anything can help..i read from manual error code but cannot understand..
-
Hi everyone. Is it possible use mitsubishi safety plc as logic solver for fire and gas detection system on the plant ?
-
Hello! What i am about to do is connecting an external SCADA system to a Mitsubishi PLC via OPC server. I have already made some FBs and included their instances in a program in GX Works2, then started a GX Simulator2 and connected it to an OPC Server. From the OPC configurator I have defined some tags with their corresponding device addresses (e.g. D12345). I am using structured variables which device addresses i am entering in the OPC configurator. Tried to make some full rebuild compiling and at first was happy that the devices remain unchanged. The main problem is that after some time this devices change which completely ruined my experiment. Maybe there is some point that I am missing or there is just no way to use a fully functional SCADA connected that way to the Mitsubishi PLC (by OPC)? The question is is there a way to tell a particularly used instance of a function block to have exactly the same device addresses ever.
-
Hello, I want to connect the Siemens PLC S7-200 with MR J2S 350CP using Serial communication (RS232/422) so, is it possible or no , any one have an idea... Thank you in advance
-
Hi Everyone I Have to replace Mitsubishi Plc with SIEMENS plc. I am new to Mitsubishi and worked before only on Siemens PLC. I have the uploaded code from Mitsubishi. I am facing problem in Analog Section about data values, Un/Gn, and Analog inputs and Analog Outputs.. Could anyone just Guide me about analog part. I Upload the analog section below. Thanks in Advance Analog.pdf
-
Hello to ALL, does any know, how to edit MITSUBISHI PLC M730MB directly on machine, or with witch program can be open and edit. Thank you and BR...
-
I am trying to connect HMI( GS Series) to Laptop but every time it says " Device not recognized ". Tried changing the port, Laptop, whole HMI. It was working for 2-3 times after installation of new software( both Windows and GX Designer). Tries uninstalling and installing GX designer. Pls help.
-
-
[Manuals, Tutorials] - E-Designer_for_E-series_English.pdf
CJ2M2016 posted a topic in Download Comments
E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials -
I new to the Cx-programmer. I'm facing a problem where i need make the servo motor go to certain direction and stop at the direction until other signal is sensed. Is there any instruction which can be used to do the ladder diagram? is it using PWM instruction? Is my servo motor (sg90) suitable for PLC ? do i need motor driver for this servo motor? or i just have to connect to the PLC 5v ? Im using CJ1M CPU21 PLC module. Im doing a sorting system project that use the servo motor to slide the item to certain angle.
-
Hello everyone, Is there any way to communicate with Mitsubishi Servo amplifier MR-J2S-350CP through RS232 ,I prefer to use 224XP because i already have it... thank you
-
Hye, I new in this plc understanding. For now I have this one ladder diagram that created in mitsubishi GX Developer that I use in winding machine as its plant. But, I have to make the FUNCTION BLOCK DIAGRAM for this part in CX Programmer. Can anyone help me how to construct the FBD in CX Programmer from this ladder diagram understanding . And did it is actually the counter function ? *the picture showed the ladder diagram*
-
Hi, I'm trying to set up a TCP communication between a Q03UDECPU and a Beijer E110 panel I've tried both TCP and UDP as "communication mode" in E-Designer. nothing seems to work. What I'm I doing wrong Se attached files from E-designer and Gx IEC Developer
-
5500 Kinetex Servo Drive with L33ERM Home Entry
dipen_95 posted a topic in Allen Bradley / Rockwell Automation
I know it may sound stupid but I am new with Studio 5000 and trying to build a project where I have to home my servo drive other than the position to zero and it is not fix but rather decided by a safety switch. What I am looking for is a dynamic Home position Entry which I am able to find it in the axis parameter but not in the CIP_Structure. Is any kind of motion FB for home position set entry? Any help would be useful. Thanks PS: Studio 5000 v30, Kinetex 5500 v7.01, L33ERM processor -
Hi i am new to Mitsubishi servo drives, i want to know how to Tune the Mitsubishi (MR-JE-A-200w) servo drive Can any one guide me please
-
i try to use M8029 to be able run pulse in sequence, i mean i can't use regular PLSY or DPLSY, it doesn't work. So i add M8029 to help clear it and make the plc able to make pulse again. But the problem, when the sequence is finish and i need to start again, plc doesn't give pulse again because the memory that set it on is already reset by M8029. how to set it on again or reset the M8029? By the way, i'm using FX3U-48MT. Thanks,I would really appreciate your help.
-
Dear mrplc and plc experts, I would like to ask for any solution or insight regarding to mitsubishi cpu problem with code: SP.UNIT LAY.MZZ which I could not find any footage/information related to this error Your helps are really appreciated.
-
Looking for some servo application help. Software: I have GX works 2, GT Designer, and GX Developer. Hardware: PLC L06CPU-P, GOT2000 HMI, MR-J4-350B servo amps, HG-JR35JK motors, LD77MS2 Pulser I have (2) AC servos that will simply move an aluminum frame backwards and forwards using a FESTO belt mover and I have a servo gear reducer 20:1. I have a "simple motion module"and all of this hardware and software, plenty of time, and would really like to finish this project off. But this is my first servo and my first hmi project. I have some experience with Omron, Mitsubishi, and Allen-Bradley plc's, and consider myself novice at best. Any sample programs or help getting me started would be greatly appreciated!
-
I want to do a calculation in the FX3u-48MT ESS and combine it with the input from HMI GOT1020. By the time i put input in the HMI with real number, and i calculate that with some equation just like in the manual as seen in the picture. I was confused when the result in the DINT is too many and in the pulse, it got minus, when it should be plus. Is there any way to fix this ? and how to round up the result correctly ? I really appreciate your help. Thanks in advance.
-
I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!
-
Hello good morning, I would like to comment on a case, I have a MR JE A 20 driver, it is connected to a plc and it moves a clamp. The fact is that I have variations of distance until it reaches stops and skips the inverter by overload. Well my question is the following, I want to use the mr configurator, I downloaded it, but it gives me a drawback when I connect it I figure as the driver, but in the program it only appears offline, I can not revert, it will be because the Plc Thank you very much for your reply
-
Good day Please assist me - pertaining to the QSeries GXWorks2 Programming - and in particular the utilization of the macrocode functionality. The information required includes; [1] Purpose of macrocode (incl advantages) [2] its utilization's effects on the PLC programming memory (it appears that it consumes more programming memory. [3] any reference documentation that could be used - containing specifically information regarding this feature (note most manuals doesn't discuss this)
