Search the Community

Showing results for tags 'iot omron'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 357 results

  1. Hello, recently I tried to hook up a new CJ2M-CPU31 (built-in EIP Port) with a NS10-TV01-V2, which has an Ethernet/IP connection also. I made the simple setting as usual : 1. PLC, IP Address 192.168.250.1, Sub 255.255.255.0, FINS Node 1, no change to FINS/UDP parameter (Auto Dynamic Generation) 2. HMI, IP Address 192.168.250.2, Sub 255.255.255.0, FINS Node 2, Register the Host as EIP, SYSMAC-CJ2 mode with the PLC IP, Disables the Serial Port For some reason, there is no communication between NS and CJ2M (timeout error always occurs). I tried to re-register the Host as FINS, set the Node to 1, and also with no avail. I did try to connect the NS to a CP1L-EM with FINS Comm. and it works fine. Anything I did miss? Thanks in advance
  2. CJ2M serial communication

    Hi! I'm trying to connect Omron plc CJ2M cpu11 (photo below) with Weintek touch panel. I've made proper cable, and I'm trying to establish communication between these two devices. I've wrote a script in Weintek's program, that sends and receives via serial port, rs232. Also, I've used example for serial communication in CX-Programmer, that you can see in attached files. I'm trying only to toggle one W adress using hmi. That sounds simple, but still, I'm not able to make plc and hmi to talk with each other. What I'm doing wrong?
  3. I'm trying to use CX-Server to pull data from my Omron CJ2H PLC directly into Excel. I'm able to pull a single element into excel, but when I try to pull more than one element, I get a huge strand of numbers. Is there a way that I can set up a single point in DDE Manager that'll hold all the elements that I need, then in excel have a formula that will pull out specific memory elements. Specifically I'm trying to pull data from D7200-D7399, and put each element into a separate cell it in a chart that ranges from B3-K22 This is what the formula looks like when I copy a point into excel =CDMDDE|'C:\Users\... ....cdm'!'\New Point 1' I didnt know if I could put something at the end of each string to call out specific elements, but I keep getting "#BadPoint" =CDMDDE|'C:\Users\... ....cdm'!'\New Point 1'!'D7200' =CDMDDE|'C:\Users\... ....cdm'!'\New Point 1'!'D7201' ... =CDMDDE|'C:\Users\... ....cdm'!'\New Point 1'!'D7399' Any help would be great
  4. Hi, I am trying to connect a CP1L-E to a NB7W-TW01B via a 5 port Ethernet switch. I have communication from the laptop to the PLC and from the Laptop to the HMI. but it seems like the HMI and PLC aren't communicating with each other. The HMI will not control the PLC. I've tried everything I know to do with the communication settings and it still will not work. If anyone has any suggestions they would be much appreciated! thanks
  5. I am a student in a industrial maintenance class. some of the other students struggle with Omron because all the info in our textbooks is based off of AB. I was wondering if anyone had a instruction conversion list from AB to Omron? any help would be appreciated! thanks
  6. Hi, i am start a aplication whith modbus for a simple comunication(read/write), some analogic imputs and outputs, whith, AB Micrologix 1500 LSP (1 com port Rs232) and whith a Omron PLC CP1L-L + CIF01 (rs232). I using CP1L like a master, but i try a lot of time and no read/ Write happens, just the recognition of Node (1) and the error code 88, no mather whith Function code i use. I use Modscan32 whith Micrologix 1500 and works fine, com settings are right to, i try 38k, 19,2k, and now 9,2k None stop bit 1, setting on CP1L are in serial Gateway. If i take the cable the reponse memory go to zero, so the communication is happen, just dont in right way. Is possible to use, RS232 whith CP1L, for Modbus communication right ? I already see PCMR code for modbus, but is to complex, for my aplication. No ofense. Someone can help me?
  7. CJ2M CPU32 SERIAL COMMUNICATION ISSUE

    Hi, I am having an issue with Omron CJ2m Cpu32 serial communication. I'm not receiving the data from pc to plc. sometimes during the production. When I recycle the power its working fine. Is there any Flag to reset the Serial port and clear the buffer on Cj2m VPU32. I contacted tech support and they told me to use A526.00n to clear the port. But I think A528.00 is not for CJ2m cpu32. I'm new to Omron programming and serial communication any reply or response would be helpful. thanks in advance.
  8. Hello! So I have this issue with me by this week. I have an NJ with unit version 1.00. I had not did any download/upload on this unit. Due to the need of showing using Password capability on Function Blocks, I need to upgrade the unit firmware version, so I changed it to 1.10. After that I tried to program a simple two Sections program. I left the CPU for a week, then when I get back to it, I upload the program from the CPU. And the upload was SUCCESSFUL! No errors are shown. However all of the Rungs inside each Sections contains nothing. Even though the two Sections that I made before are still present. The program itself is still working though. If I open the previously saved project, going online and do variable controlling, I'm still able to do so. Has anybody experienced this before? Any suggestions / solutions? Thank you...
  9. Hi, I'm wanting to know from anyone using Citect 7.X and above, about how your systems are set up when using a primary/secondary redundant server setup. With the advice from some consultants I've changed from a couple of stand alone units to a redundant server setup and multiple clients plant wide. There's about 8 PLCs currently with more coming. However it was recommended to split the IO server of Citect over the two physical servers, so that 1 physical server is the Primary IO server for 4 PLCs and secondary server for the other 4, then the other physical server has the same setup just opposite Primary/Secondary setup for the devices of the first physical server. I get that it splits the work load, but our engineering team is updating the servers multiple times a day most days and we will be for at least the next year, I'm finding that this system isn't very friendly constantly shutting down and restarting etc interrupting trending also, and want to switch from this split IO Server setup, to just one server that's primary, one server that's secondary. My Question, is it fine for one physical server to be primary and for how many PLC's? Server is a 6 Core Intel 2011 socket CPU (Not sure on exact specs at this stage). System INFO TAG count is about 5000, and Manufacturing is a slow process so no need for split second updates on anything. about 500 Trends polling every 1 second. Cheers.
  10. connecting ixt4a to a cj1m/cp1l/ns network

    hi everybody i have a network with 2 pieces cj1m and 2 pieces cp1l communicating with a ns15 monitor. everything is fine. i need to connect an ixt4a monitor in that network. my question is : do i have to make new routing tables or it is not neccessary? my routing table for cj1m and cp1l cpus are attached. if then i have to make new routing table so that the cj1m will be able to communicate ixt4a monitor, how am i going to do it for both monitors? Any help will be mostly valuable and appreciated. thanks
  11. Hello! I saw there were some people on this forum who works with theese old PLC:s so i try here: Run onto this ancient Omron PLC - C20-CPU84E. Someone has not maintaned the battery enough.. and someone has not upgraded the machine. Stupidity. Now they want it running in three days. About 100+ I/O so its interesting to kick the old horse once more. I took the CPU off-site for investigation. I do not have the programming console etc but I am able to hire equipment from Omron if needed. PLC is said to have PROM. CPU is set to RAM ( dip-switches ). "PROM" Circuit has no programming window. It does not look like Omron EPROM images found on google. PROM chip has marking "Omron BP0J". * Application does not seem to need timers. Battry dead. LEDs: POWER ON RUN OFF ALARM OFF ERROR ON For testing - I charged the battery to 3.3+ V ( later resoldered the connector to a fresh CJ1W-BAT01, also gives 3.3V ) LEDs: POWER OFF RUN ON ALARM OFF ERROR ON Manual says it wants the battery alarm reset using programming terminal. Question: Run is lit: does it actually run? Or is it - it tried to run?. I tried manipulating some inputs and suspect the later. If it run - I could travel on-site and see how the machine behaves. If not - i have to get theprogramming terminal first. Thank you for any input.
  12. I have a CP1L by Omron and a barcode reader by Honerwell. I want to activate the serial port 1, to connect it with the reader. The reader shoul read one of the 2 main barcodes. If the reader get the barcode 1, then it should read 3 times the barcode A and activate an output; but if it read the barcode 2, it should read 3 times the barcode B, and also activate an output. I want made my programm in ladder programation, How I can activate the serial port 1? How I set the the serial port 1 as an input to the function block RXDU? How works the FB RXDU? How I can set the codes? How I set the fb RXDU as an output?
  13. Has anyone had experience communicating with a Fanuc robot controller via EIP? Looking to communicate with the following robot controller. Typically need an EDS file to import to talk to 3rd party devices.Have not found one yet. Looking to communicate with the powermotion i Model A series, A02B-0323-J147 Ethernet I/P boards. Thanks in advance.
  14. plc-plc via internet

    Hello all, I wonder that is it possible to communicate 2 CJ2M plcs or 2 NJ controllers via internet? Those are far from each other. There is WE70 wirelles unit however distance between them more than 5 km. Any idea how can i solve this issue? Thanks in advance. Have a nice day.
  15. Migration from C60H

    First of all, I'd like to say hello to all of you. This is my first post here. I'm not well experienced in Omron products and I need a little help from you. My client has an old machine with Omron C60H PLC, He asked me the make the backup of the program and put the newer PLC. I'm thinking of using CP1L series (or CJ2 - not sure of it now). The question is, what accesories do I need to connect and upload program from C60H to my PC? I heard that the 3G2a6-LK201 module is adequate. Do I need something else? I'm using CX-programmer. Can I handle uploading program from C60H with this software? Is there a function that converts old program to newer version compatibile with CP1L or CJ2 series, or must it be done manually? If you have any tutorials or tips and tricks about migrating from C60H to newer series of Omron, I would very appreciate it. Thanks in advance, Marcin
  16. Hello, I am having troubles configuring my Data Station Plus to be able to read my Vacon VFD registers over a Profibus network. The network is configured from an Omron PLC. I have communication but i do not know how to map the tags on Crimson to be able to read what the drives are doing. I am most likely thinking my offset on the tags that i have set are the main problem. Any input/ suggestion would be great thanks Specs on System: -Omron PLC CJ2M w/profibus PRM21 -Omron HMI NS-12 -3 Vacon NX VFD's -Data Station Plus w/profibus module
  17. If you are looking for PLC spare parts check out our Ebay Store http://stores.ebay.com/Nordland-Industrial-Parts Make us good offers
  18. Omron CJ1M-CPU13-ETN to .NET Framework

    Hello People, In my school we had an assignment to program a Sorting machine using an Omron PLC and CX-Programmer. Now we got the assignment to make an HMI that we can open on our own computer (Windows 8.1) so that we can control various things of our program, such as reading and writing bits, and other data (To the PLC obviously). Now I only have very little experience in reading and writing data from a PLC (Using a PC), I have used the libnodave library to connect to a Siemens S7-300 PLC. With this I managed to read and write bits, and also read and write data to a DataBlock. We wrote this program in Visual Basic 2013 using the .NET Framework with the libnodave library as an added extension. Now I have searched far and wide on the internet but have not come across any good examples of how to do this with an Omron PLC. So I hoped that I could get some advice from you guys. What I'm asking is if anybody here has maybe a link to a guide/ example program/ manual that could get me forward? And if I can easily get this done with Visual Basic, by adding an extension, could anybody tell me which extension this would be? And where I could find it? I appreciate any help. :D Thanks in advance, BitsNBytesRookie
  19. Unlock Functionblock OMRON

    Can anyone help me to unlock a functionblock in the plc program of a OMRON CJ2H program?
  20. OMRON PLC's and CITECT Comunication

    Hi All; I am struggeling to get my CITECT to talk with my CJ1MCPU12 with ETN21 module. I can ping the IP address from the citect PC and also connect CXONE using ethernet with supplied IP Address. I do not have FINSGATEAY installed as the PC is Windows 8 with CITECT 7.4. Any Ideas would be most welcome as I am drawing a blank. My settings are OMRON ETN21 IP: 192.168.0.3 Unit number: 0 Citect SCADA Primary Server IP: 192.168.0.24 Citect.INI [OMFINS] Source = 1/3/0 (not too sure what this should be...) COMMUNICATION settings: [bOARD] Name: BOARD1 Board Type: TCPIP Address: 0 [PORTS] Name: PORT1_BOARD1 Board name: BOARD1 Special Opt: -I192.168.0.3 -P9600 -U [i/O DEVICES] Name: Internal Number: 1 Address: 1/3/0/S Protocol: OMFINS3 Port Name: PORT1_BOARD1 Startup Mode: Primary Prioirity: 1 Memory: True
  21. Problem of CX-PROGRAMER

    When I open the cx programmer v.9, I am getting the following message: "could not initialise cx server. check installation". Can someone help me? I have been reinstalled the omron twice but cannot resolved this problem Thanks
  22. Hello, I am looking for Omron PLC's bit set instruction, which is similar to Mitsubishi's, like, in Mitsubishi PLC: Set B1000Z0 if Z0 is 10AA, then B10AA will be set. has Omron's instruction set contains such functionality? In my application, PLC will receive a number for example N(i.e. a sequence number), and I want to set the set the Nth bit in a memory block (W or so). Many thanks in advance. Xing
  23. OMRON NT31 HMI

    Hi, I have been communicating OMRON HMI NT31-ST123-EV2/EV3 for creating, uploading and downloading program screens with NTST4.6 but today I have received NT31-ST123-EV3-QR HMI but it could not be communicated with Support Tool. Can any one sort out the problem? Attached is the snap shot of error message.
  24. need help with SCADA database. moving 50k points

    Hello, Let me preface this. I have used this site many times when searching for issues and it has always been helpful. This is my first post here. I have been programming PLC's, HMI's, VFD's etc etc for 15 years, fairly complex stuff. I have also done lots of SCADA programming but more just for basic interface, monitoring, basic parameters changes, logging, etc etc. I am not facing a setup where I must do a large recipe/batch data transfer and I am confused as to what the best path is to achieve this. I have fairly basic knowledge of VB script as I have not needed to use it very often. Here is the problem I am facing. The SCADA package the customer has is Omron CX-Supervisor. The network is all Ethernet Based 1) I have 26 moulding machines on the plant floor2) There are 50 different moulds that are moved around from machine to machine3) Each mould can run 1 of 10 different colours4) There are 100 differing cycle parameters for each colour/mould combination =50x10x100 = 50 k points for total machine that = 50k x 26 = 1.3 million ! What the end result will be is this. From the SCADA operator terminal they would like to be able to keep a 'master set' of these settings, call up a mould/colour combo and see the individual parameters. Then they would like to edit individual parameters and download to each individual machine, or all at once. I do have a PLC at the Main terminal that was used for translation of the old serial network to ethernet. All of the serial connections have been removed so it is basically doing nothing. I could use this as a "master" for holding parameters if needed. What is the best way to go about this. Create a database, use the built in recipe manager, use PLC here as 'master storage". I feel once I get down a path it will make more sense...I just don't want to pick the wrong option and have to redo it all. Keep in mind my PLC coding is vastly superior to my knowledge of database manipulating and VB coding ThanksDan
  25. I successfully read the input and output of OMRON PLC CPM2A with Indusoft web studio (IWS) by using OMPLC driver. I have select OMPLC driver (Serial Com). Then configure a driver worksheet. The driver worksheet is the place that PLC tags are associated to InduSoft tags. I successfully read the I/O but I failed to write the I/O of PLC by using IWS. Can you help me? It is difficult to find OMPLC Standard Driver Sheet (SDS) for control relay output block (CROB) and Analogue output block (AOB). The attached diagram shows My Standard Driver Sheet (SDS) setup. Thank you for your kind cooperation. Zack Malaysia