Search the Community
Showing results for tags 'example programm for encoder read in sysmac studio'.
Found 345 results
-
Studio 5000 EDS not registered in offline build
kdobsontn posted a topic in Allen Bradley / Rockwell Automation
Hi all, I've ran into an unusual situation where I could use some suggestions. I have an AB PLC working in the field, and an existing fixture that needs to be transferred from an Omron PLC into our AB. I have an integrator who did some offline development with a welder that uses Anybus communication. He sent a .ACD file to implement the logic from. The file has an Ethernet module configured but more importantly, it's showing EDS not registered. I've asked for the EDS he used, and none of them work when trying to register it via right-click and register. I can export the module, but it won't import into the current PLC program because there's no EDS (shows EDS error after the import). If I try to take the program that was sent to me online with the PLC, it will automatically upload and overwrite the build. I can't even open the properties of the module to see what the integrator did. The end goal is to have the offline developed module implemented into the current program, but it seems like everything I've tried to do has me against a wall. Is there a way to go online without uploading? Maybe there's a way to implement this I haven't learned yet? Any suggestions would be much appreciated, and if more information is needed, I'll be glad to provide it. More info: PLC Type: 1756-L82E ControlLogix 5580 Rev: 30.014 Studio 5000 Version 30.01.00 - Standard Thanks, K -
I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio). I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT. I have been told I should be able to do that, but it still does not work. The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before? It may be a setting I have not done right maybe?? Thanks,
-
HI everyone , i will be very glad if anyone helps me to clear the doubt . I am using MX component version of 4 to connect with my CCLINK J61BT11N Board. Is there a way to read group of registers from the CC-LINK . for example, if i want to read from D0 to D5 or write D0 to D5. is there any function in MX component which helps to read the group of registers? I use MItshubi PLC .
-
I am using a Label as a Message Display with Resource Group. I want to do the same thing with my User Alarms, I do not like the Alarm View Popup.....The image is how I assume it needs to be setup. It compiles and downloads without fault, but messages do not display. Any thoughts on what I am doing wrong? I could retype all the User Alarms in a Message Resource folder, but I have a lot of User Alarms.... Thanks,
-
I have done some digging and cannot find an alternative. I need a Multi-State Indicator for my NA-Series HMI that functions like the "Data Lamp". I do not like the "Data Lamp" because of the darker shade to the color scheme. Does anyone know of an alternative? I know I can simply use several "Labels" of different text/color and then only make "visible" the state I want the operator to see...…. Thanks,
-
Anyone know of a guide about programming a balluff io master device into Sysmac Studio?
-
I am in desperation.....I had a Recipe setup made for my NA-Series HMI using Sysmac Studio. It WAS working until I decided I wanted the name of the Recipe to be something different. After I compiled the HMI, I got several errors referring to the new name of the Recipe file. I remembered that there was some background code that had the old name in it so I went there and changed all the statements to the new name....still no luck. I changed the Recipe name back and changed all the background code statements back to the old name....and I still get the faults.... What have I done and how do I fix it? I am desperate to fix it as I have customers on Wednesday morning :? Thanks,
-
-
MX Component Programming Manual View File MX Component manual for programming PC - PLC software solutions. Details MX Component library functions and examples. Submitter WattUp Submitted 03/13/20 Category Manuals, Tutorials
-
In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
-
Still learning Sysmac Studio......how do I gain access to System Variables like 'PageIndex" so my PLC can be notified what Page the HMI is on? Also, how can I execute an 'Acknowledge All' from the PLC so I can reset the 'Alarm Viewer Popup' from my PLC? Thanks,
-
A simple request for an Omron novice. I know Timer values in Sysmac Studio are classified as TIME variables. How can I modify the Preset of a TON block from my NA HMI since the TON Preset is of a TIME data type? Thanks,
-
Hi In CX-programmer there is a PWM(891) function. Is there a similar same function block in sysmac studio ?
-
I am trying to use the "Scroll_composition_all" IAG that I found browsing the Omron Software section...… What am supposed to put in "AlarmObjName" in Properies of my NA5 (using Sysmac Studio)?? I figured it was just a set of buttons that would control the selection bar on my Alarms Display.... Thanks,
-
EtherCAT Communications with Yaskawa SI-ES3 for A1000VFD
WKTilton posted a topic in NJ Series / Sysmac Studio
Has anyone had experience with EtherCAT Communications using Sysmac, NJ5 PLC & Yaskawa SI-ES3 EtherCAT Comms board for A1000 VFD? I have looked at the manual, but as I am still green on Sysmac & Omron programming in general.....not sure I understand what to do to simple Drive Status monitoring, Execute RUN/STOP & Speed Select... Thanks in advance :) -
Compiled my HMI file I am currently building in Sysmac Studio for my NA5-Series display. Not finished, but I executed a Build and this is what I got....I have absolutely no idea what it means...... Thanks,
-
Is there any instruction in Sysmac Studio Structure text to detect rising Edge (DIFU/DIFD) ?
-
I have made a fat bloated program that runs too slow. I tried working under the philosophy that "Premature Optimization" is the biggest time waste in developing programs. Now my program takes to long to run and throws a task error. I am attempt to cut the primary task's cycle time down I tried to move programs that use IO to other tasks. Task 16 is supposed to be able to handle IO but it doesn't come up as a selection choice of priorities for me. I can do 17 but I get errors trying to use IO variables at that priority level. NX102-1200 controller, Sysmac Studio 1.30.1. Should I be able make a task at priority 16? I have some analog IO that I don't need to update every millisecond and I have some data and loop intensive FB's that only need to run once hour and I'd like to get them off my primary task's to-do list. I'll be busy re-writing my program FB's to accept specific variables instead of bloated structured variables and converting and changing Lreal's to real's and some other Premature Optimization tasks so I can run the sucker.
-
Studio 5000 View Designer Window Display
Jennifer Lew posted a topic in Allen Bradley / Rockwell Automation
I am using Studio 5000 View Designer v4.3 to create an HMI on Panel View. I'm having a weird issue where every time I open up my project, the windows are displaying only in the lower right hand corner. This wasn't happening earlier. Undocking the window, expanding the window, uninstalling and re-installing View Designer have not helped. Trying to open View Designer as an administrator has not helped either. I know there are better HMI platforms, but I am basically complete with the construction of this HMI using Studio 5000 View Designer and now it is too late. I just want to add a few more buttons and I can't do it because I can't see the bottom of any of my windows. Since Studio 5000 View Designer is based in Visual Studio, maybe someone would know how I can fix this via Windows registry files? -
I am new to Omron Programming, Sysmac Studio NJ processor & NA hmi. I am used to being able to create diagnostic PLC logic using BIT addressing from a DINT variable for setting diagnostic signals for an HMI. I can also use the DINT to do a quick check to see if it is greater than 0, therefore signaling I have a Machine Fault. I cannot seem to figure out a way to get those BITS setup in the User Alarms of the NA programming. I have found where you can setup a Datatype/Union to be able to use the DINT scenario and Bit level in PLC programming....but that doesn't help on the HMI side. Any thoughts??
-
I need to write c# with modbus TCP to read NJ, Anyone able to to use PC communicate with NJ by using Modbus TCP? Any Function need to be added in the PLC, for Example , PC to read Register 40000 to 40020 ?
-
Problem to read pulses (encoder) of VHSC24/C Card using CompactLogix
Vinicius Santos posted a topic in Allen Bradley / Rockwell Automation
Hello guys, I am running an application for packaging measurement using a sick DFS60B incremental encoder (programmable from 1 to 10000 PPR). In more detail, it passes packaging on a conveyor belt and we have created an inspection station and an expulsion station (defective packaging), so we use the encoder to check at specific points of the packaging for defects (we use special sensors to check defects). ) (there are four in total). However, the problem we are having is the following: When reading the encoder in the PLC, the same means that performs "jumps" and does not enter the windows (GRT and LES) created on the ladder, ie, as if it were not continuous. . I understand that because the VHSC24 card works at 1 MHz in counter mode, this type of problem should not occur according to our application is not even 100 KHz. For example, our case: Using 1000 PPR and the motor speed (coupling output) is 3600 RPM (in practice it is around 1750 RPM) the frequency is calculated as follows: F = (PPR X RPM) / 60. : F = (1000x3600) / 60 = 60 KHz, ie 60 KHz is much less than 1 MHz, I think this kind of problem does not occur. Application Info: . Studio 5000 V31 . PLC Model: Rockwell 1769 - L19ER-BB1B CompactLogix 5370 . Encoder Card: 1734-VHSC24 / C . Incremental Encoder: Sick, DFS60 up to 10,000 PPR and HTL Electrical Interface. Using a 200 mm circumference / perimeter wheel. . Motor Nameplate Data: 1670 RPM, 0.37 kW / 0.5 HP, 60 Hz . Inverter: Weg CFW500, Output Frequency 62 Hz. Card Settings we use RPI: 2 ms Type: Counter, but we already use it as Encoder X1 Store Count Mode: Disabled Filter: No Filter, but we use 50 KHz and 5 Khz filters in our tests. Counter Attenuator: 1 Wiring Diagram VHSC24 We turn on encoder A at input 0 and encoder Aret at input 1 In logic (Structured Text) Using the PMUL instruction to convert encoder (Pulse) data to mm scale. (Ladder) The window comparisons part (GRT and Les) and other part of the process. We emphasize that we performed the tests also only with the reading and comparison part of the data, excluding the other parts, precisely to verify the issue of Scan, but the problem persisted. If anyone here in the forum has some information that can help us, I would appreciate it. -
I have R16 PLC (firmware45) and SD card(2GB). Can any one help me to create CSV file in SD card.I need to Logg the data of D0-100 when the M0 trigger bit goes high. can any please help to creat ladder for this. it will be really helpful.
-
Trying connect baumer EAL 580... Ethhercat absolute encoder with Beckhoff C6015. Ethercat connection is From PLC to EL6695 module(This module is connected to KUKA robot for mater to master communication) and from Out port of EL6695 to In port of Baumer Encoder. It is not getting scanned nor manually appended. But when i connect it directly to PLC it works fine(gets scanned). Any solution?
-
1734-VHSC24 Draw Wire Encoder rollover
Andrew R posted a topic in Allen Bradley / Rockwell Automation
Hi all, I am taking a Kubler draw wire encoder back to a 1734-VHSC24 and having a little bit of an issue with the rollover. With the draw wire untouched the output value seems to be fluctuating over time and appears to be drifting backwards to the rollover value making our distance measurements completely useless. Does anyone have any insight as to why that might be?
