Search the Community

Showing results for tags 'cx designer or sysmac studio'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 382 results

  1.

    Version 1.0.0

    83 downloads

    E-Designer_for_E-series_English.pdf
  2. E-Designer_for_E-series_English.pdf View File E-Designer_for_E-series_English.pdf Submitter CJ2M2016 Submitted 09/09/17 Category Manuals, Tutorials
  3. Hi, i am currently trying to integrate visual studio with advanced HMI tool box to an Omron PLC (cp1h). i am trying to use one of the communication option which is "OmronSerialFinsCom*". But I have no idea how to actually do it. can anybody help me with the setting of the "OmronSerialFinsCom*" properties and where should i download the USB driver for my PLC (cp1h). Thank you in advance.
  4. Hi Everyone! I try to read Analog Data in PLC Master through Salve Module (ECT-21) but i dont see any data, with an Digital Module i can read and write, but with analogic module i can't do anything. The analog module works perfect, i have 4-20ma Simulator and work fine. Modules: PLC: NJ501-1300 Slave: ECT-21 Analog: ADO81-V1 Can u help me? Regads..

  5. FX5U With E-terminal

    niklas posted a topic in Mitsubishi

    I was looking for what drivers that should be used when connecting the new FX5U plc with the older E-1000 series (E1100 in this case) in e-designer 7. Intended connection method is ethernet on the FX5 (obviously) to Ethernet on the E-panel. I am sure this question will come up for several users so let's keep this thread as clean as possible. Has anyone done this Before? Here are the options available: /Niklas

  6. multi-screen alarm check/deleting

    smokey88 posted a topic in CX-Designer

    Hi All, I have a requirement from a customer to acknowledge alarms from either of two  NS15 HMI's in the system. Can anyone provide info on how I may be able to acknowledge or delete alarms on one HMI which would also acknowledge or delete said alarm(s) on the second panel?  Both of the HMI's are polling one controller for alarm status so I assume that each time an alarm is acknowledged or deleted it would have to alert the controller which would then send something to the second HMI to clear the alarms? Any help is appreciated.
  7. In Sysmac Studio, is there a way of addressing Array of for argument sake 100 INT. For ex: TEMP[array 0..99 of int]- AT %W0  If I do that will TEMP[1] be %W1 or I cannot address array. PS: I am currently using NJ501-1300 and Omron NB Screen. I am reading/writing total of 450 variable all comprise of either INT or WORD. I would like to group them together for easy access and keeping my variable table neat. Is there a better way of doing this. Any help is much appreciated.

  8. Indirect Addressing NA Terminal

    Luis Miguel Garcia Hoo posted a topic in NJ Series / Sysmac Studio

    Hi. ¿Is there a way to use indirect addressing on a NA Panel?  I need to use a motor operation template for several motors and i think is not very smart doing the same panel over and over. I have always created a screen and then reused it (on FactoryTalk View, Intouch, Schneider Vijeo) The problem is that we don't find any article about indirect addressing on NA panels. So we dont know how to do it. On CXDesigner we used DM addressing so we could use a template instead of creating many button panels when we need to operate a motor, for example. Its like when you use indirect tags on Intouch or Parameter files on FTV. I fear that indirect Addressing is not possible, but in that case ¿Which method do you recommend? ¿Got an example or an article mentioning it? Thanks in advance.

  9. [Utilities] - NX-EIC202 Utility

    Michael Walsh posted a topic in Download Comments

    NX-EIC202 Utility View File A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000. Submitter Michael Walsh Submitted 09/22/16 Category Utilities
  10. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached

  11. Track NS series IP addresses

    b.k.n. posted a topic in CX-Designer

    I am using the NS series touch screens and NS-Runtime. Do they have a System word that stores the IP address of that touch screen or PC running the NS-Runtime application. I want to be able to trigger different functions in my project depending on the IP address.

  12. Sysmac studio network configurator

    mehdi4467 posted a topic in Omron

    hi could you help me to find sysmac studio network configurator? from where i can start it?
  13. I'm trying to overlay a text figure on top of a bit lamp. You'd think it'd be easy... but no matter what layer I set the lamp to, or how many times I click "Move to back of layer" from "Stacking order" in the right-click menu, the text figure stays behind the lamp. The only reason I'm using a text figure vs. just using the text function of the lamp is because I want the text to be vertical - a feature that you do not have with the text function of a lamp. Any ideas on how to fix this? Any help is greatly appreciated!

  14. CX Designer using tables - Help

    smokey88 posted a topic in CX-Designer

    Hi all, I have been getting to grips with the different graphic displays in CX One Designer but I am having trouble trying to produce a table which shows column one as a label and column 2 as data value that I am polling from a Modbus slave. From what I have read/tried the data block table seems to require a csv as the data source and I cant seem to achieve what I want with the standard table. If anyone can advise how I might be able to achieve this I would be extremely grateful. Below is the sort of thing I'm hoping to achieve but in a table format:   Bearing 1 Temperature 80°C Bearing 1 Vibration 0.2 mm/s²         Bearing 2 Temperature 82°C Bearing 2 Vibration 0.2 mm/s²  
  15. I'm printing extracts of my code for change control records. The print quality is terrible as it seems to output low-resolution JPEGs to the PDF or XPS files rather than vectored graphics and TrueType (or other vectored) fonts. See the attached close-up showing the artifacts. Exporting in this fashion also makes the resultant PDF unsearchable. I can't find any configuration options for this. Is there a fix?

  16. NS10 system program update?

    Chickenkiller91 posted a topic in CX-Designer

    Hello, I would like to download my project to the NS10 -v2 but i get the following error:   I kind of remember that it was p;ossible to update this automaticaly in similar cases, like 8.7->>8.8 or something like that, i just clicked on okay and it did it automatically. But after ok the application just stucks on loading, NS restarts, in case of ethernet. I tried it with usb, it just quits after ok, and nothing happens. How can i upgrade the NS10 to 8.8 or 8.7 or 8.9 to be able to download my new project??  
  17. So my company recently purchased a new Allen Bradley PLC Demo kit from Amatrol (CompactLogix L16ER) and I installed the Studio 5000 v24 onto our company computer and started going through the Amatrol Lesson Plans. But then I had a bit of a snag. The lessons required that I open the files from the From Upload option on the Studio 5000 start up screen. Only, it wasn't there! There is no From Upload option on the start up screen. Anyone have any ideas how or why it's not there, and most importantly, how to get it there? It's kind of important!   Thanks!
  18. I have version 1.17  .. and when I tried to import a file from a friend, I got this instead: Is there anything higher than V1.17? 

  19. Got2000 and gxworks3

    Ligglogg posted a topic in Mitsubishi

    I need help i have a got 2000. I developer my software for the hmi with gtworks 3 my problem is: when i update my software in the hmi over the USB cable with my Notebook then i become an error message after reboot. the error message is: communication error refer to sytem Alarm in utillity menu. At the moment i must disconect the hmi from the current and then it works. can everbody help me?  
  20. Hi.  I'm running a Windows 7, 64-bit machine.  I have NB Designer 1.4 installed.  when I plug in the nb7w-tw00b, it shows up as "MTP USB device", and that the driver install failed. so I opened Device manager and find the item, I right-click "MTP USB device", and "update drivers".  I click "Browse for my drivers" and navigate to "C:\programfiles (x86)\omron\nb-designer\driver".  I check "Include subfolders".  then click next.  it does not find the drivers.  says "MTP drivers are the best" So I try again: right click the "MTP USB device" but this time I click "browse for drivers", then "Let me pick from my device drivers...".  i navigate to C:\programfiles (x86)\omron\nb-designer\driver.  I select the bulksub.INF file, and i get this error: "The folder you specified doesn't contain a compatible software driver for your device.  If the folder contains a driver, make sure it is designed to work with WIndows for x64-based systems" NOTE: I just tried this on a Windows 7 32bit machine. same problem.  Except the message says "Make sure it is designed to work with Windows for x32-based systems"   Any thoughts to get this to work?

  21. NA5 Screen Locks Up

    justjohn22 posted a topic in NJ Series / Sysmac Studio

    I have multiple NA Screens on a control system and they are arbitrarily locking up.  The screen becomes distorted and unresponsive.  It has happened at least three times on different screens.  The only way to resolve the issue is to disconnect then reconnect power.  Has anyone seen this issue? Is it a known issue?  The controller is an NJ5.
  22. Good morning i want to know how i can recognize into the compactlogix 1769-L24 ER the micro 850 (2080-LC50-24QBB), because i want to communicate this two devices with MSG, i already i can see these two equipments into RSlinx but when i start Studio 5000 i don't know whick module i have to use it to recognize the micro 850, please help me
  23. I am new in sysmac studio programming. I used WSFT function (word shift) in cx-programmer. What function I will use in Sysmac studio? Thanks.

  24. Revert to home page

    b.k.n. posted a topic in CX-Designer

    Is there a way to make so after there is no user activity on a HMI for a certain length of time that it will switch back to another page? I have a macro here I am running every second that is watching for page changes. But obviously changing pages isn't the the only user activity there is. 'clear the counter when not one page If($SW0==BCD(65)) $W150=0; EndIf 'Increment Counter If ($SW0<>BCD(65)) $W150=$W150+1; EndIf If ($W150>10) $SW0=BCD(65); EndIf  
  25. Hi, I'm a long time lurker and would like to start by saying thanks for all the help over the years, much appreciated!  This is my first post, please be gentle. I'm working through a large project with an L83 (V28) including 75 EIP nodes & 5 servos.  We have a need for quick real-time response of 2 cameras during a quick servo move (taking several pictures).  I've broken my program up into a few event driven tasks (allowing me to chose the execution time interval (5 to 8 ms for more important tasks and 20 ms for less important tasks, etc.)), along with these I have 2 periodic tasks: 1 for my HMIs & faults running every 30ms and 1 for this quick real-time response camera situation running at .5ms which contains my camera and servo logic.  Everything is running well and seems responsive and repeatable enough, but I am now adding the second half of the logic which will essentially double everything (2 up system).  This has made me consider the best structure approach: Is it better to have a few larger routines within a few larger tasks or better to have more smaller tasks containing an abundance of smaller routines or some other different mix? Thanks, JD43