Search the Community

Showing results for tags '#mitsubishi #servo'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 401 results

  1. PLC to PLC

    Good day! They asked me to make an ethernet communication between 2 mitsubishi Q03UDE PLCs, without including an additional ethernet module, the truth is I don't know where to start, I would greatly appreciate your help.
  2. Axis Permanent Control

    Hi Guys, How can I bring an axis into permanent control? that as soon as a value changes, the axis reacts. My Hardware FX5U, FX5SSC MR-JE-20B. Thanks a lot.
  3. HMI point table help

    I have a GS2107-WTBD-N (HMI) and I am trying to create a program that will allow our operators to change feed lengths (from a point table) via the HMI which communicates to a MR-J4-40A1-RJ Servo Amplifier. I am not sure how to upload my point table from MR Configurator 2 into GT Designer 3. In production we have a Rockwell PLC that they want to communicate with this Mitsubishi system. So my question is, do I have to have a PLC for operators to pick their "recipes" (point table lengths) or can I just upload my point table in my HMI program and let the drive do the rest? Secondly, how do I upload my point table into my program if it is possible. First year apprentice trying to accomplish this task. Any help would be appreciated.
  4. Where shall i start?

    I used to learn OMRON's PLC back in my diploma days, and its just ladder diagram, after i finished my diploma intern, the PLC program that my company used is mitsubishi GX Works3, its a big different to me since theres new program to be learned, such as structure diagram, function block etc, is there any website that i can learn or youtube channel/forum? i just wanted to find the correct way for me to learn, currently using the Q-series model:- R61P thanks :). I'm sorry if i asked a weird question :)
  5. Servo tuning

    Hi.  I am planning to do a full scale servo tuning on our producting machine. Is it possible to do it while the servos are in, assambled? I mean no production, no disassembling, servos stay where they are, just tuning them one by one with their empty load..
  6. HELLO EVERYONE THERE IS THIS PROJECT WHERE I CHANGED THE OLD SERVO SETUP WITH NEW SERVO DRIVE MRJ4200A-RJ SERIES. OLD SERVO HAS A REVOLUTION OF 15 BITS BUT NEW SERVO HAS 22 BITS RESOLUTION. PROGRAMMING IS SAME BUT MY DISTANCE CALCULATION IS DIFFERENT NOW AND MACHINE DOES NOT GIVE CORRECT DISTANCE. PLEASE HELP ME
  7. servo training

    Hello . Does anyone from the forum have such a program as on flimik, and he could share a program for f3x and the got1000 panel regards
  8. GT2710 screen not refreshing

    Hi All, and apologies for what is probably a proper newbie question. I have a Mitsubishi GOT2000 (GT2710) connected via DH485 to an Allen Bradley SLC500. Most of it works fine except for one base screen, which when opened doesn't get updated with any values. Opening any overlaying window screen will then causes the underlying base screen to then get populated. It's almost as though the first screen doesn't know where to get it's data from until the second screen is opened. As before I'm a beginner with this, so hopefully there is a simple setting that I haven't spotted. Thanks in advance for any advice.  
  9. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  10. Hi fellow PLC veterans, I am new in the PLC world so please forgive me if my questions read dumb to you..   I am just wondering if there are any newer PLC machines that can: 1. keep the program even after its battery is completely flat or faulty  (Is this even possible?) 2. allow users to copy and save the program somewhere so one can install the program again without the need/presence of the machine supplier What tools/software may be required?   Thank you for reading and look forward to your response :)
  11. Hi, I'm looking for help with the string exchanging between GT25 and AB CompactLogix. I'm reading recipe data from SQL via MES interface to the local devices such as GD3000. I want to move the string held in the registers GD3000-3009 (20 characters) to the string tag in the Allen Bradley. The problem is that in the scripting I cannot enter the AB Tag, because when I imported the CSV with the string tags their data type is STRING, and the scripting in GOT accepts only numerical datatypes such as WORD, etc. Has anyone found a way to handle that?
  12. Hello, everyone I have to query a SICK distance sensor from an L26CPU via the onboard Ethernet interface. I have created a simple protocol which I start with the function block SP_ECPRTCL. Unfortunately it takes at least 25ms until the next telegram is started. The sensor responds within approx. 1.5ms. Does anyone know whether that works faster or is that a limitation when using the predefined protocols? Sensor manual:  OD5000, 8021391 (sick.com)  (Chapter 7.4) I am grateful for all the hints. Thanks and regards Dave SICK_Protocol.tpc Messaufbau_vTest.gxw
  13. Hi there I am working on a project where Omron servo drags a part to a certain position using belt mechanism, But to avoid any slippage we decided to put an external encoder directly on the part. I was wondering what is the best to approach to drive the servo using the position of this external encoder. Is there any way that it can be configured directly with the servo? I am fairly new to coordinated motions, any help will be appreciated. Thanks
  14. Hello, I am started working on Gx Works 3 recently, actually want to know if I can access local labels from other program body or can call them to other program body?
  15. Alternative Servo Drives

    I'm sure many of you are in the same boat with supply issues and elongating lead times with the Logix 5500 and 5700 servo drives. Are there any decent alternatives that are easily integrated into a 5380 controlled system, maybe with an AOI? I've looked at Beckoff and Parker systems, but Parker only seem to line CoDeSys as far as I can tell. Do any of you clever clogs have any suggestions for a well stocked alternative? As a side note, I'm not new to PLC programming, but I am only 6 months in to using motion and servo systems so be kind :)
  16. FX 3U to Q CPU wireless Communication

    Hello experts, i want to connect 9 FX3U units with one  Q cpu base PLC unit over wifi, can you plz share the configuration details.
  17. FX3U to FX3U via wifi

    Good day fellow PLC ninjas! I have a question/ concern which I would love your opinions on. We have 3 FX3U PLC’s+ENET cards. Two of the 3 PLC’s move around in an EMS trolley. The other is a ‘base station’ with a GOT2000 connected via Ethernet. Base PLC IP = 192.168.1.11 HMI IP = 192.168.1.31 Carrier 1 IP = 192.168.1.61 Carrier 2 IP = 192.168.1.62 I have programmed the base PLC to use Active communication; we are using fixed buffer communication to send and receive data to/ from the Carriers. The carriers are set up as Fullpassive ‘slaves’. This part works well and the update time changes (using a counter in the base station) from 1s to 100ms (because it enters a different work station).  My issue is the following: using a network sniffer (WireShark), I pick up plenty of re-transmits and sequence number errors coming from the base PLC’s ENET card. This is troublesome and causes delays when the update time is required to be fast (100ms). I am sending and receiving 10 words of data. The wifi seems stable, and there is minimal noise in the area. The power has been turned down and the antennas used are suited well for the application. The antennas are at a similar height to minimize possible loss of signal. I have LOS (line-of-sight) to the carriers at all times; to at least one of the antennas (I am using 802.11n). Has anyone picked up issues or found settings which can be used for comms over wifi? I can easily do this using a S7-1200 Siemens PLC and have done so using 12x S7-1200 clients and 2 AP’s with 1 base PLC. I have also successfully done this using 8xFX3U client with a System Q base PLC. My suspicion is that the delay in reading and writing to/ from the BFM in the ENET card is causing this. I am not sure that if I change to a FX5U will help. The communication cards on the Mitsubishi PLC’s seem very limited. Does anyone have any technical details on the access times between the CPU and communications cards’ BFM? Help is as always, appreciated.
  18. Hello! I'm trying to connect my QD75M2 with a MR-J2S40B1 Servo amplifier with an SSCNET cable. The problem is when I try to turn on the Servo ON/OFF on the Intelligent function in GxWorks2, an error occurs saying the servo amplifier is disconnected with my QD75M2. I'm confident that I've wired it properly. What could be the problem? Hoping you might help. Thank you.
  19. simple motion cam curve

    Good afternoon, I have a problem in an application for a rotary knife, I'm using a MR-JE-B servo to make this movement, while my material is powered by an inverter connected to a modbus rs485 network, with a 5v encoder connected directly in motion. I'm having some problems and I think it's my cam curve. I have a very high refeneration, and the system doesn't obey the size of the length I want the cut. It always cuts the same size, regardless of the configuration I use, it always cuts to 245mm. Put some photos, how are my settings. Grateful in advance, if anyone can help me. Dover_roll_1-Motion-configuração_jog_manual.gx3
  20. Hey! Is there any possibility to acces the PLC variables in GXWorks from another program? Like I want to read and write the I/O-s or Merkes in the Mitsubishi PLC from another program Could someone help me with this? Thank you!
  21. Hello! Is there any possibility to connect a Mitsubishi PLC to a program like Siemens Plant Simulation? With Siemens PLC I can do it through OPC UA protocol, or Shared Memory with SIMIT, or stuff like that. But I would need to do it also with Mitsubishi PLC. Can I use for example OPC Server? I couldn't find out, if Mitsubishi PLC-s have that function built-in. (I have a L02 and a FX3S COU, either of them would be great.) Thank you!
  22. My HP laptop will lose communication with Mitsubishi PLC occasionally after removing ethernet cable to download from WiFi. Our company limits the ability to use the wi-fi when I have an ethernet cord connected to my laptop, it has to do with security. If I am connected to the Mitsubishi PLC, then want to download another file from our autosave, which we connect through the wifi, I have to remove the ethernet cord from my HP laptop to enable the ability to go wireless, however sometimes when I attempt to go online with the PLC after I re-connect my ethernet cable, GX developer will not allow it. I can ping the plc and even go online with other PLCs on the network, but for some reason, the one I was connected to will not connect. I restart my computer and even re-download the file again from autosave but no joy. Its not until an unknown amount of time that it will allow me to re- connect, its as if I lose the socket connection on the plc and it needs time to reopen. I talked to our IT department and they have no ideas. Thank you in advance for any help on this matter.
  23. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...
  24. A1S68AD CARD

    Hello. I have a system in which an A1S68AD card is used, that card has been damaged . I replace that damaged card with the new A1S68AD card with same wiring and same setting of dip switch. But at channel number 3 there is a RTD connected which gives 4-20 mA signal. But in Plc at channel number 3 the data register is showing -2400 fixed value all the time and in actual the temperature is varying. But PLC SHOWS FIXED VALUE OF -2400. PLEASE HELP ME OUT.
  25. All of the ethercat servos I have installed are Omron. I have used many many brands in the past - over analog, pulse train, but not ethercat. I have one of the Yaskawa servopacks that can control two servos independently. The drive is all wired (POT, NOT, safety), autotuned, it's in RUN OK state, I have installed the ESI file, set up the axis, mapped the PDOs.. it's all working, but they do not move. I made a test program just with MC_POWER and MC_MOVEJOG/MC_MOVERELATIVE/MC_MOVEABSOLUTE along with the resetting of MC and EC and the servos do turn on, but ignore any movement command. They do not flare up with an error, and they give me their actual position, so the network is working. If I send the movement command the command position starts to differ, so the plc is/should be sending the command. I feel like there's something missing in the PDO mapping screen, but I didn't need to do all of this with Omron so I have no idea. I thought at first the servos needed huge units of movement and speed but the actual position value confirms this is not the case since it doesn't ever change.