Theuns

MrPLC Member
  • Content count

    29
  • Joined

  • Last visited

Community Reputation

14 Good

1 Follower

About Theuns

  • Rank
    Sparky

Profile Information

  • Country South Africa

Recent Profile Visitors

2292 profile views
  1. Analog output fail A1S

    It could also be noise from one of the VSD's causing your module to fail. What type of VSD's in panel ?
  2. GOT Simple Series having SCREEN ERROR

    Hi  Post your project .   Regards
  3. MELSEC-L PID Control

    Hi Neverov There is a separate manual for PID. See attached pic. I can send it to you via email   Regards
  4. Q-Series - Decimal value in HMI?

    Hi See attached example  
  5. MITSUBISHI A1S68AD PROGRAM

    What PLC error do you have ? You should definitely  do the i/o assignment 
  6. MITSUBISHI A1S68AD PROGRAM

    Did you read From plc (Parameter and Program) or only Program ?
  7. MITSUBISHI A1S68AD PROGRAM

    First of all your I/O assignment is blank under PLC parameter. Start off by entering info . eg slot 0 should type should be Special , Enter model name ( A1SJ71AT21B ) for reff. , Points will be 32. Then Slot 2 will be Special model name ( A1S68AD ) 32 points . ect. ect. until all models are done
  8. MITSUBISHI A1S68AD PROGRAM

    Why not ?
  9. MITSUBISHI A1S68AD PROGRAM

    Attached is the manual A1S68AD_UserManual_IB-66576-F.pdf
  10. Shihlin AX2N to FX3U need help

    Replace the FX2n CPU with FX3U then Replace the FX0N-16EYR-ES module with a FX2N-16EYR plug everything in and it should work .     
  11. Shihlin AX2N to FX3U need help

    Can you post a pic of your setup ? And maybe the Program
  12. Shihlin AX2N to FX3U need help

    I do not think that you can connect the FX0N-16EYR-ES to the FX3U main unit , Can you swop it out with a FX2N-16EYR ?
  13. fx3u-enet-l configurator tool

    https://forums.mrplc.com/index.php?/topic/35454-fx3u-enet-l-no-connection/
  14. FX3 ENET COMMUNICATION from PLC to PLC

    This is a sample program from Mitsubishi. FX3U 1-1 Ethernet Demo.zip
  15. Mitsubishi FX3u Ethernet options...

    The FX3U-ENET is configured via  FX Configurator-EN so it is considered a "special function Module" If it is located right next to the plc it will be Module nr 0 , If you have a FX3U-4AD next to the plc and then the FX3U-ENET it will be module Nr 1 . The FX3U-ENET-ADP is setup via special relays and registers with Gx developer or Gx works 2. Refer to manual  JY997D45801 for the  FX3U-ENET-ADP