Mitsubishi GX Works 3

[MrCob 0]

Hi guys. I have 1 doubt. How to check Initial status' (Un\G1900024.0): On) from GX Works 3?

This is for data communication procedures. 

TIA

 

[Gambit 330]

^{Use Uxxxx\G1900024.0 for an open contact where xxxx is the I/O number of the Ethernet module. (If the ethernet module is on IO nr 20 use U2\G.....}

[MrCob 0]

Thank you bro Gambit. Got it

[Gambit 330]