Search the Community

Showing results for tags 'output card'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 70 results

  1. Upload file using CF card

    M_M posted a topic in Omron

    Hello all I have a folding machine with Omron PLC and HMI NS5-SQ10B-ECV2, the problem is the hmi software disappeared and " No project data" appeared. I contacted the manufacturer and they sent me A single Ipp file. i am not really experienced in omron but i knew that i can upload the soft using CF card so, i used it and switch DIP6 , and the HMI recognized the CF card put it did't see any software. i tried to put the soft in folder with the same name but with no luck. I attached the file he sent me. 出口.IPP
  2. I hate to start a new topic on such an old processor but I forced to keep this thing working until I can upgrade it.  We are having funny issues with outputs.  At first they were on a PLC5/60.  We suspected a bad processor so we changed to a PLC5/40 we had in our tool crib and the problem didn't go away.  Some of our outputs in the ladder are being evaluated to true but not turning on.  We can force the output on and it will come on and when we remove the force it will turn back off.  I've never seen this problem before on any processor.  All the logic leading up to the output is true but the output is not turning on and is there not green. I've already checked all the obvious causes.  The instruction is an OTE.  The output is not duplicated somewhere else in the logic that is turning it off.  The ladder file is being scanned.  I replaced the output with a B3 bit and on the next line had the B3 bit turn on the ouput.  The B3 output bit turned on but the output did not.  This output is on a remote I/O rack and other outputs on that rack are working. Any ideas would be greatly appreciated.
  3. Help to find out specification of analog card AD-081-V1 . please suggest me this analog input card is active or passive?.
  4. Hi..  Looking for a reliable SD card that will work well in the NA5 HMI..  I can't afford the Omron SD card.  And, if there's one out there that will work in the $50 or less price range, please let me know... Thanks, Regards, Michael
  5. Hi I am searching for plc having negative analog input and output. i.e. 0 to -10v analog i/p and Analog o/p.  Can any one help me in finding plc which has this feature .  Thank You  

  6. Fx3g Binary bit Output

    saruans posted a topic in Mitsubishi

    Hello, Need your advice. I am trying decimal number convert to binary and do output. for example If inside  D90 I have 11 decimal number then for me need active output Y0, Y1 and Y3. I tried make this code below, but it is not work, don't active output . Maybe fx3g PLC have function how need to do it?
  7. Hello, My quest is to make a memory card, which I can just put into my PLC on the field and load all program and options etc to my plc. Now i found the official omron guide about it but its not good at all... For example is does not explain that how i need to transfer the H and D memory part to the plc, and that not all network settings are being copied if im not careful.   But my question is: is it possible to make this backup memory card without having the actual plc? Because the process is done in memory card window, which is only available if you are online. So basicly i have to get all the plc rack parts to make this work? I tried with the simulator but ofc it is not working.   Someone mentioned me that it is possible he heard from someone but no one actually knows how to. And there is nothing in the omron manual as i see.
  8. I have read that it is possible, in CXDesigner, to download the program from the computer onto a memory card, and then download from the memory card into the HMI terminal. Is a similar thing possible with CXProgrammer, and PLCs? It would be quite useful, for the purposes of updating the program on a customer PLC that is located overseas, when the customer does not own a laptop with CXProgrammer installed.
  9. Hi to everyone, I use PowerFlex 520 drive on profibus (with adapter 25-COMM-P) for first time. I managed to start/stop/reference drive using Logic Command/Status I/O but didn't manage to get output current using datalinks mechanism. I configured DP master (Mitsubishi Q PLC, QJ71PB92V) as shown in the attached picture. The main problem is that trying to modify C161-C164 (Opt Data In 1-4) parameters drive does not accept the entered values and it turns back to value "0". First, I disabled I/O connection with the controller Disconnecting the drive from the network. On the other hand, drives allow me to change parameters C165-C168 (Opt Data Out 1-4) but these are out paramenetrs (from the controller's point of view). Is there any guy that managed to get the output current  in any way on profibus network? Thanks a lot for your help in advance! I post this message in Allen Bradley Forum, too.
  10. Hi to everyone, I use PowerFlex 520 drive on profibus (with adapter 25-COMM-P) for first time. I managed to start/stop/reference drive using Logic Command/Status I/O but didn't manage to get output current using datalinks mechanism. I configured DP master (Mitsubishi Q PLC, QJ71PB92V) as shown in the attached picture. The main problem is that trying to modify C161-C164 (Opt Data In 1-4) parameters drive does not accept the entered values and it turns back to value "0". First, I disabled I/O connection with the controller Disconnecting the drive from the network. On the other hand, drives allow me to change parameters C165-C168 (Opt Data Out 1-4) but these are out paramenetrs (from the controller's point of view). Is there any guy that managed to get the output current  in any way on profibus network? Thanks a lot for your help in advance!  
  11. Is SOE card compatible with both quantum & premium plcs.? 
  12. Hi all, Currently running a Quantum 140-CPU-652-60 FW3.12 out to a remote rack over a Modbus Drop in to a 140-EHC-105-00 High Speed Counter, words are mapped OK to the program, configured at a type 7 setup (1sec frequency) etc. The card used to work when we were running the system as a ConceptXL 2.6 setup with a 140-CPU-534-14. We have just upgraded to UnityProXLv8 and it stopped. The mapping is configured by word to bit / bit to word across the %IW and %MW (previously 948 3x and 4x registers, but converted nicely, everything is aligning). Anyone stumbled across this issue before? Any help would be appreciated. Thanks, Rob
  13. I've got a PLC stack with a Q64AD analog-digital converter card. I am attempting to read the digital output value of channel 1 but I am having issues. First of all here is my simple PLC program: I got the program from the Q64AD user manual. You can see there is a blue '0' on the right of line 0. I assume this is the value that is being read? When I monitor the D11 device in GX Developer it shows a '0'. The following is a screen from Online > Monitor > Buffer memory batch. My card has a base address of 0x60 and channel 1's offset is 11d (0Bh). The value on the highlighted line does change so I know that the analog card is correctly picking up on current changes from my source. Lastly here is an image of my digital inputs. I have set up the Q64AD card through the GX Developer PLC Parameter window and left all settings as default. I initially used 'K11' instead of 'H0B'. I have also tried using the MOV command (MOV U0\G61 D11) but that game me the same result. Can anyone spot the flaw in my program of configuration? Do I need to configure the PLC in order to use the 'D' devices? Should I try copying the value somewhere other than D11? Thanks
  14. I am trying to determine or find any figures that could assist in obtaining the lifespan of a single output of a 1756-OB16E output card. I have a signal sending 400 pulses a minute to an output. I am starting think about when this card or output may need to be replaced before failure. I was given a MTBF range by Rockwell for the card itself but they could not expand on the likelyhood of the output failing exponentially due to the rapid signalling. I could also not find anything in the manual itself that could provide me with an idea of longevity, I could be missing it? Also with this project I experienced something odd with the originally scoped hardware, a solid state 24VDC relay (700-HLS1.) By measuring the resistance I was able to see that the relay should have been opening and closing but the signal was not being received. So, I swapped the solid state relay for a mechanical relay and it worked fine. I was curious if the leakage could have an effect on this. The problem with the mechanical relay is that the life is dramatically reduced to about a month for this installation, life for the relay is shown at about 10,000,000 actuations. I was hoping to have this working with a little longer life expectancy. If anyone has any experience / tips / or suggestions it would be much appreciated! PG
  15. I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!

  16. CQM1-CPU43 Output OFF Bit SR 252.15

    sashaleiz posted a topic in Omron

    I am from AB world, but now am facing up with Omron PLC troubleshooting. One of my machines with Omron CQM1-CPU43 went out of work, because of low batteries in the PLC, program was lost and PLC stock with Error” Low battery” Is my luck, program was stored on EEPROM card, so I replaced the battery and reload program back to PLC, but after that other light on PLC comes up ”Output Inhibit Bit” is ON and all outputs are OFF. Operational manual sated just “turn back to OFF position, the “Output OFF Bit SR 252.15” and nothing else, where and how I can do it. I can not find in the CX programmer software the way to switch this bit, neither one rung in the program consist this bit, I really don’t know how solve this problem. Could you, please advice?
  17. Hi Good Day, I need a suggestion, I have an omron encoder, encoder counter meter (K3NC-NB1A) and communication card RS-232C 25pins (K31-FLK1). My question is, what is the best omron software to read and manipulate the data from the encoder (I have CX-one software but I only use CX-programmer). I want to capture the encoder pulse and convert to velocity, acceleration, deceleration and also energy absorbtion. I have to use mathematical formula such as two times differentiation. I also need to show grapf and display final result that is energy absorbtion reading. Or is it much simple if I use VB / labview / java software? Thank you in advance
  18. I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks.
  19. I have had a GE 90-30 CPU331 in my house for 17 years with no trouble at all. I have a problem that I have never seen before. I was editing the program using LM90. I don't know what I could have done in the program to disable an output. Just 1. All the rest of the points in that group on that card still work. I swapped cards with no difference. All of the elements of the rung are true (highlighted). The output is not on or highlighted. The nickname over the output has ONE letter highlighted. The bit in the reference is "0" and is highlighted or "grayed out" (the cursor is not on it). I searched for coil conflicts. I am using this output contact lots of places but only one output. The logic is working correctly when I use another output or %M. This is an isolated output which needs to be in this group (moving it would be awkward). What does a "grayed out" reference bit mean?

  20. FX3U_GXWORKS2_BINARYCODE_BY_OUTPUTS

    UltraSound posted a topic in Mitsubishi

    Hi all, Im new with plc programming and now I need some help. As topic says, I have FX3U plc and gx works2. Now, I need to tell stack heigth as positions by output. We all agree, that you can tell ten different situations when you have four outputs (Y1 and Y4 = position five). Is there any practical/ reasonable way to do this when you need use outputs. For example, is there any Functions for this, or? Best regards Ultra.