Search the Community

Showing results for tags 'omron hmi'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 315 results

  1. Help Program C40P Using Computer

    Hi Mr. PLC Members, I have two Omron Sysmac C40P PLC units with no programming units or connecting cables, I need to connect and program them using normal computer. I searched the form to find the software as SSS or LSS and the cable as 3G2C7-LK201 and the programming unit as C200H/PRO27 console. Is there any way to connect the C40P directly to the computer and program it? What do I need for this? -hardware and software- I know they are old nowadays, also I am not sure if the needed hardware is still available. Thank you in advance.
  2. Humming Noise in Motor

    We are using NX1P2 Controller with servomotor compatible with servo drive R88D-1SN it produces noise during operation low noise at low speed and hig noise at high speed we have 2 more axis which doesn't produce any such type of noise.   It also produces vibration in the motor.
  3. I'm using simple function block, one input and one output, like in this example: Problem I have is how to call function block and use inverted (NOT) value , ie instead 5.01 I need to use NOT (5.01) . Of course I could create new symbols that are inverted values of actual inputs but i'm trying to avoid that, number of addresses is significant.
  4. HI everyone i was wondering if i could connect a cp1l-el to 2 different NB screens running 2 different programs. we have a main line HMI which displays the health of the entire line with its own cj2m plc, we also have a machine which is part of the line that has its own plc(CP1l-EL) and HMI. is it possible for me to include the cp1l in the main lines HMI so that it can display the status of that machine? or will it cause issues because it already has a program attached to it. i dont know exactly how the NB program works does it just read the bits of data it needs to or is it constantly looking at the whole plc data list?
  5. Hi there, I have a controller NX1P2-1140DT. I want to control a VFD with modbus serial communication. Can someone help me start from scratch ?
  6. Omron CJ1M CPU11 - ProfiNet - Siemens

    Hello guys, newbie here. Wait, where are you all going...? Don't go! I've got *some* experience. And a job on my hands. I've got an Omron CJ1M with a CPU11. Attached, is a PNT21 Profinet IOController. At the other end, it is going to be a Siemens SIMATIC ET 200AL, PROFINET interface module IM 157-1 PN with a couple of digital input and output modules attached. The hardware isn't here yet, otherwise I'd just jump straight into trouble. Probably. I've got it mostly setup in ConfiguratorFDT with the GSD files from Siemens. The question: How do I map the Symbols to the digital IO at the other end of the profinet? Can I just set the symbol address to the IO areas that ConfiguratorFDT show me, ie, 3300 for the inputs, etc? Thanks!
  7. Timers in structured text

    HI everyone ive decided to try and use a structured text function block for an machine output calculation, to put it simply i want the machine to say how many units its outputting per minute so i thought it would be much nicer to have a basic maths Structured text block rather than a long bit of ladder for some simple instructions. i have 2 inputs, one is the start of the machine cycle, the other is the end of the machine cycle. every cycle is one unit output. i want to time the gap between input 1 and 2 then just a bit of simple maths 60/(cycle_time) for uniters per minute. i want this to be to 2 decimal places for a reasonable resolution. the main problem im having is the timers in structured text, im a little confused how they work i would do this in ladder by having input 1 set a bit and then input 2 resetting this bit(i assume i can set a bit by using an if statement [if input 1 true, timer{bool}true]) this timer bool would then activate the timer, again how i would do it in ladder would be to have a timer1 count down from &500 then use a maths block for 500-timer1 and this would give time elapsed this is the bit i really dont know how to do in structured text and would appreciate any help in the matter. otherwise i can just do it in ladder   added my idea of what it would look like IF Cycle_start=TRUE THEN     Timer_start:= TRUE; ELSIF Cycle_end=TRUE THEN     Timer_start:= FALSE; END_IF; TIMHX(Timer_start, Cycle_timer,Timer_time); Cycle_time_bin:= 500-Timer_time; Cycle_time_real:= UINT_TO_REAL(Cycle_time_bin); Cans_per_min:= 60.0/Cycle_time_real;
  8. Hello all,   My coworker is running into an issue where his version of Sysmac Studio has been updated, but this is causing a version mismatch from an existing project.  He has called Omron, and they are saying that there's no way to downgrade the OS.    Project operating system version = 7.4.0 Device Operating System version =  7.3.0   So the OS on the NA5 would need to be upgraded to match the version of Sysmac.  Does anyone have any suggestions to revert the automatic upgrade that has occurred? Any help would be appreciated!
  9. MPG WITH OMRON NX CONTROLLER

    How we can connect MPG with omron NX SERIES CONTROLLER. PLEASE HEALP 
  10. CC-Link Protocol with a CJ2

    I have an IAI servo that was sent to us with CC-link protocol. I have never in my life used cc-link and can find very little on the topic on integrating with an Omron CJ CPU. I am curious as to whether this has been done, or is even possible given the protocols Omron works with. And if so, what did you have to do to get the PLC to communicate via CC-link. Thanks in advance for the responses!
  11. NA Data History Program

    Does anyone have any idea how I can create a Data History though the NA screen. I know I can do a Data Log with a Data Set then use a Trend Graph but, I want to create the "Table Like" Data History found in the Omron NB screen. I use data histories for a UI to an operator to review previous Cycle Times, Poka Yoke values, and Temperatures monitoring with a time stamp as to when the data was recorded. Any ideas?  I am using a NX102-9020 NA5 Screen
  12. Hello Sir/Ma'am, Hope you and your family are safe in this Covin-19 Pandemic.   One of my client have a machine in their ceramic industry which has Omron PLC System. Here I am describing the PLC Hardware Structure. (CP1H-X40-DT1-D-SC) + (CP1W-40EDT) + (CP1W-DA041) CP1H-X40-DT1-D-SC (Main CPU Unit) CP1W-40EDT (First Expansion Module, on right side of the CPU) CP1W-DA041 (Second Expansion Module on right side of the CP1W-40EDT)   Client shutdown the machine before a month due to Corona Pandemic, and today restarted the machine.   Now the problem at the restart of machine... Analog Output of 0-10V DC are not sourcing from the attached analog output module for any of channels. (Used to control speed of AC Drive) We have checked the program, and verify that the program is moving the value in analog output register address, but still no output signal at the module.(Checked Using Multimeter) We have same machine at another factory so we have tried to replace the all 2 expansion module and observed that the first Digital Module is Working properly but only last analog output module is getting problem again.   I don't know much about OMRON PLC Programming so seeking for the help regarding this.   OEM have moved the data in CIO 106 for generating analog output, as well OEM has move #8099 in CIO 104 and CIO 105 at the first scan of program. I don't know very much about this programming, that's why i refer some manuals but didn't succeed yet.   Kindly help me out if possible... I have attached backup of program as well for reference...   Thanks...   Bobin Feeder.cxp
  13. NB screen freezing

    Hi all has anyone ever come across a NB series screen freezing when a screen change is attempted? i have a NB7W which when told to change to screen 58 or 59 via a function button or via a PLC instruction it freezes the HMI and it needs to be restarted. have i hit some screen limit or something? they only thing i can really think of it has too many graphics, it contains 6 bitmap images and about 12 graphic buttons/lamps
  14. Hey guys, I am having and issue trying to connect a NS Hmi to the current setup that I have installed. My processor is as CJ1G CPU42H. It used to communicate with 2- NT31 via Nt-AL001 module. I had one NT Hmi that faulted and I am trying to replace it with a NS10 model. I am aware that the ports on the NS are RS232's. I installed a NS-AL002 in port A and assigned the appropriate dipswitch settings. 1-ON 2-3-OFF (4wire) 4-On terminating resistance since it's the last HMI in the loop. HMI Project comm Settings are NT Link (1:N) Comm speed (I tried both High and standard) Unit# 1 (tried to change that as well with no luck) On the first HMI (NT) I get Comm port B Receive error when I turn on  HMI#2 (NS). Every time I tried a different setting I made sure to restart the PT. Any suggestions would be greatly appreciated! Thank you.    
  15. Hi All, I've some problems after converting a cqm1-cpu41 program to a cj2m unit. I am still trying to identify all problems  but the most annoing at this moment is the following. This cpu is connected to a proface HMI, and commands the screens that are shown,  through D1. I am keep getting screen #9 ("press reset"). if i press and hold ALARM_RESET (0.07) and the timer hits, I get the main screen that i want.But after releasing ALARM_RESET (0.07) screen #9 is back again (so that value is wriiten in D1)   This is a snippit of the converted program (exactly the same as the old program) There isn't any other code writing #9 in D1.  The strange thing is that line 210 is doing exactly that ( IF NOT ALARM_RESET (0.07) -> MOv #9 to D1 ) what is see, but how in earth did this work in the old CQM1 unit ? I suspect something with cycle time ? Maybe in the old unit line 217 was executed later and #A was written in D1 'over' the #9. Anyone has some thoughts on this ? Thanks in advance  Jeroen  
  16. Hello, I need to make communication NB TW01B by Omron with Siemens's S7 1200 PLC using MODBUS TCP. I did everything like in this manual: https://www.myomron.com/index.php?action=kb&article=1566 I can read and write single bits from and to DB but I have problem with representation of float variable. In hmi_variable.png you can see my DB. Every BOOL variable communicate just fine the real ones doesnt. In NB - variables.png you can see how i added them into NB panel variable table. Settings.png shows settings of my INPUT number element on the frame( screen in NB). When I write on panel for example number 10.0 then from the panel view it looks properly but in PLC you can see value like in the 10.0.png. What am I doing wrong? Any suggest? hmi_variable.png NB - variables.png Settings.png 10.0.png
  17. is there a way of stacking screens in NB designer? ive asked question similar in the cx programmer forum but it might be better asked here. for instance if i have a program that displays an error screen when lets say the motor is overloaded but then the air pressure is also  cut off so that screen then pops up, we currently have a system that states when there are no errors to display the main screen with a DIFU command. however this system doesnt work very well if multiple problems occur it will only display the most recent one and when that is fixed the screen will not change. is there a way to make screens "overlap" and be able to close them individually or just any methods you have used that might be better at controlling the screen for this sort of application? thanks anyone who can help
  18. mx2 control with modbus

    Hi all im back to trying to get my inverter to work but this time with modbus, from this post http://forums.mrplc.com/index.php?/topic/38445-controlling-mx2-inverter-without-modbus/ and im stumped, im sure its just one thing somewhere messing it up i have a cp1l-el20 with a cp1w-cif11 and a 3g3mx2 inverter and am attempting to control it via modbus, it is wired up as follows, sp+ to RDB+, sn- to RDA-, common to the plc pin and plc output pin 100.00 to logic input 1. im using 100.00 to put it into run mode the paremeters ive put in are a1=3,a2=1, a4=50, c070=3, c071=5,c072=1, c074=00, c075=1, b27=1. im using MOV to set my speed to d1001 attached is my inv002_refresh x31 fb thanks to any1 who can see my silly mistake    
  19. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  20. Hi all ive been given a small test cabinet to play around with and test on, it has a cp1l-el plc and a mx2 inverter, ive been looking at how to control the inverter and cant seem to find a way to program it how i want. the plc has no modbus connector so it cannot be done that way i want to be able to set the frequency and be able to start and stop the inverter through the control pins. let me know if this is possible, thanks
  21. Scu41 pin layout

    Can someone tell me if I'm being an idiot please, I can't tell from the pictures in manuals whether the pinout is for male or female connector. Is the picture right? For an scu41 this is for rs422 modbus, its connected to port 1, just need to know which way round the wires should be
  22. Cannot recieve a string RDX

    Can someone help me how i can receive a string (RXD-command) I do not receive a thing. 
  23. Hi , we have to send and receive strings to the vision pc from Omron NX plc. The communication is via 48 real value I/O array. Datalogic advises to copy the string values directly to the Real values of the tag structure. On the datalogic side, it will be selected as string. But, for me the string values are not reflected on the PC side. Kindly help me on this. We need to copy strings to real value arrays to the datalogic PC. Impact_EIP_Reference.pdf DATALOGIC_IMPACT_RSLogix_5000_EDS-AOI_v2.5_QuickStart_Guide.pptx
  24. Hi all ive been trying to figure out if theres a way to close pop up screens from the plc when the machine i have get an error of some kind a pop up screen appears on the HMI(NB3Q-TW01B), i currently have it so that if all errors on the machine are resolved it returns to the main menu which was fine until i added a couple of new errors where them being resolved might take someone out of a screen they are working on. so a close screen function for each individual error would work alot better but im not too sure how to go about it. thanks to anyone who can help
  25. I have been able to Jog the opposite direction from a Hardware OT with my 1S servos (using Sysmac Studio).  I reset the OT Fault and Job the opposite direction. What I am having trouble with now is, I have set Software Limits and I cannot Jog off like I can with the Hardware OT.  I have been told I should be able to do that, but it still does not work.  The fault returns immediately when I press the appropriate HMI Job button....which is the same HMI buttons and Logic used when I have the Hardware OT. Has anyone ran into this before?  It may be a setting I have not done right maybe?? Thanks,