Search the Community

Showing results for tags 'nb-designer v1000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 110 results

  1. CX-Designer || Get error history

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  2. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  3. Hello Everyone,   Make - OMRON HMI Model - NB7W-TW01B Software - NB Designer   Suppose I have more than one number input display on a screen of HMI. When I touch and enter the data in any one of them and press enter, the keyboard not closing automatically. in sted of auto close, the cursor moves to the next number input display to enter the data. How to auto-close the keyboard after entering the data in any number input display.
  4. Hi Experts, I would like to know is there any possibility to make a switch that can make exponential increment to a data. i know how to make a switch to increment data in fixed intervals with a switch but im trying to make a switch when you press it continuesly it should increase the gains rapidly over time. is this possible and if yes can someone explain me how? im attaching a sample image how i want to make two buttons to increase and decrease a data. thank you in advance guys. kind regards, sathu.
  5. Hello all I am trying to figure out if its possible to save a screenshot of every screen on a HMI to usb at the same time, so i have currently created a button on a screen that saves the screenshot to external memory, is it possible to make it save a screenshot for every screen instead of just one? maybe i would have to create a kind of function on the plc that cycles through the pages and then takes a screenshot of each? any help would be appreciated currently using a NB7W and a CJ2 cpu 31 although it would be nice for this to work with everything
  6. Hi there! I'm trying to communicate HMIS5T HMI with a Modicon Micro TSX3722001 PLC. The communication is OK, but whenever I try to enter some data into a numeric display I get an error that says "Method or function in Communications System unsupported" and data won't change on PLC's Animation Table. Also, if I modify a variable's value in PL7 Pro, the value in the HMI numeric display won't change properly. It displays the last digit of the binary format of the number (let's say I write a "3" on PL7 Pro, then I get a "1" on the numeric display, despite all data types being UINT, and all ranges are OK. Then if I write any number which binary version ends in 0, I get that 0 on the numeric display, nothing else. Again, all data types and ranges are OK). Changing variables' source on Vijeo Designer to Internal doesn't seem to work. So I'm wondering what else must I do in order to send and receive data from/to HMI and PLC?    Thanks in advance and I hope you can help me! Update: Got this solved. For anyone wondering, Vijeo Designer 6.2 SP8 it's kinda buggy with Unitelway communication. There's a hotfix that solves this problem, provided free by Schneider.
  7. NB-designer V1000

    Hello. Can someone help with an example program in the nb-designer application for communication with drive v1000 yaskawa after modbus RTU (rs422). It was very important to me that the reference speeds were shown in this example (d1-01; d1-03) could also be acc - dec (c1-01; c1-02) Of course, I have the NB7W panel and the multi drive v1000 yaskawa
  8. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
  9. Good day everyone, I recently got NB HMI and program it together with my NX1P2 PLC. I got 2 questions I would like to ask. What I'm trying to achieve is to lock all the button after I start my system or during the pop up screen for confirmation. I tried different methods and it doesn't work. Currently I'm using a direct window Pop-Up screen to cover all the button behind it, but I noticed if I drag the pop up screen, it'll move together. So I wonder, is there any correct methods of doing it? Also, the function key for change screen, I use it for Pop up screen but why it only spawn on the top left of the screen instead of the center? Thanks in advance guys!
  10. Hello everybody, I've been searching for a solution for this problem, but haven't found it yet. When the user is done with a task, a certain bit turns ON. Then a poppup should popup. I tried using alarms, but that won't work, because I have to initialize an alarm display on every window I've made.  Can somebody help me?  Thanks,  
  11. Varying Versions

    I have an NS5-SQ01-V2 that i pulled a program from. I am reloading the same program back onto the PT but i keep getting an error code that the "Program is V1, PT is V2. Continue Transfer?" I know this means that the versions obviously differ but this is the first time ive come across this. Will it do any harm to anything to continue with the transfer and see how the machine reacts? 
  12. Error Compiled

    Sir, i can't compile my file that i have made. It say " The compiled file is not found. Please compile the title first". So, because of that i can't do offline simulator on NB Designer
  13. Hi  I want to use in sysmac the number of the active page in nb designer. for example if I am in page number 5, the program in sysmac recovers in a variable the value 5 THANKS
  14. Hello everybody, I continued my project this morning and my HMI gives the 'PLC No response 00-02-3" error... I haven't changed anything since last Friday, so in theory it should work. I used this tutorial a few weeks ago and that worked. I also tried so use some old programs which used to work, but they don't work now...  HMI IP: 192.168.250.1 (the addresses from the tutorial) PLC IP: 192.168.250.2 (the addresses from the tutorial)   Does anyone know what could be the problem? I already tried using another switch, but that didn't work either. EDIT: I just saw that I posted this in the wrong subforum, excuse me EDIT2: I found the solution. I cleared the data memory before... So what I did was transfering the settings to the PLC, then completely power off the PLC and then power it on again. That worked for me! Thanks, Olivier
  15. setting date cp1l

    Hi all im currently using the DATE instruction to set the PLC's date and time via the HMI which is an NB7W which i have working but i am currently setting each byte of the words being used in DATE by using numerical inputs in NB designer and entering integer and decimal to set these bits in DATE and its a bit ugly to say the least. is there a way on nb designer to only modify bytes or am i going to have to used full words on nb designer and use MOVD in cx programmer to assign them to their correct byte CURRENT SETUP always on DATE using d50=d53  
  16. Keypad in GT Designer

    I need a key pad which can be used for numeric input, can anyone provide any sample program.   Thank you.
  17. My Compact Logix PLC is connected to my computer by USB. When I try to create a new view designer file, I can not connect my view designer with my controller. "OK" button of the HMI to controller path remains INACTIVE. Please see the attached.  How can i solve this issue?
  18. String shift register

    Hello all thanks to bits n bytes's date and time to string converter here https://forums.mrplc.com/index.php?/topic/31786-write-plc-time-as-text-to-memory-card/#comment-149418 i have made a nice string output function block for the PLC date and time that i will attach. I'm now wandering how to shift this into a memory card as well as display it on a NB screen. for the NB screen i think i can just used a text box to display the code using 8 words, i sadly dont have a CJ2M plc with me at the moment so i cannot test. for the memory card i have not used these at all yet, is there a special shift register for strings? i cant seem to find it. i will be using this simply for a checklist on the HMI where an operator goes through the list of tasks to perform and ticks them off on the HMI which then logs the time and date they were completed at. do i need to create a shift register using MOV$ with a @destination and increase the count of the destination witch each input? Thanks in advance Date_and_time_string_convert.cxf
  19. This is my first post so let me know if there is anything wrong with my post. I am learning Studio 5000 right now for an internship and created a simple project involving a pushbutton and some LEDs. Now I am trying to create an HMI for it in View Designer. My problem now is that I cannot establish a connection to the project because I do not have a physical HMI connected to my plc (Logix 5380). I can't find any way to emulate an HMI module so that I can get it to run. When I emulate my HMI project it tells me "Unable to reach controller TEST" where test is the name of my plc program. I added a module that matched the model in my HMI program (panelview 5510 2715p-t7wd) which I arbitrarily picked at random. But when I go into references and try to add HMI to Controller Path it does not show up (I'm assuming it's because it is faulting in the plc program since it doesn't actually exist). Is there not a way to emulate an HMI or add a virtual HMI to my studio 5000 program that I could connect to from View Designer?
  20. HI everyone i was wondering if i could connect a cp1l-el to 2 different NB screens running 2 different programs. we have a main line HMI which displays the health of the entire line with its own cj2m plc, we also have a machine which is part of the line that has its own plc(CP1l-EL) and HMI. is it possible for me to include the cp1l in the main lines HMI so that it can display the status of that machine? or will it cause issues because it already has a program attached to it. i dont know exactly how the NB program works does it just read the bits of data it needs to or is it constantly looking at the whole plc data list?
  21. Hello, can we do the simulation between sysmac and nb designer thanks
  22. I have one project on which the offline test works nicely. However if I "Save as" and give it another name, the offline test stops working. I click on offline test, the loading hourglass appears for a few seconds, then nothing happens... Does anyone know why, and/or how to get offline test working again? I am running NB Designer version 1.3. I always compile before trying the offline test.
  23. Hello,  Sorry I'm newbie with omron plc programming. I'm wondering how can i simulate plc program on sysmac studio with Hmi on Nb designer without hardware. because I want testing my program and my plc and hmi connection before buying hardware. Thanks in advance !
  24. HI all i was wondering if it might be possible to edit the name of a word switches state. I'm creating blank presets for a machine lets say 1-10, i would like to use the drop down word switch which would display preset 1-10. is it then possible to edit preset 1's name to something like "8mm diameter" by using the notepad function on nb designer and directing that to some location on the plc? any idea or different methods would be great, or even if its not possible. thanks
  25. Hi. In GT Designer 3 i am using a template for motor control and status in a panel. Due to changes in control philosophy a button was added for STOP. This has been added and registered in the template. But how do I also update the objects? Should this have been done automatically if I had done it correctly? Cheers