Search the Community

Showing results for tags 'internal program variables'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 87 results

  1. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  2. could you tell me how to create internal tags in DIAview and how to dynamically change the colour of any object taken in SCADA  
  3. Looking for Socket TCP/IP communications program examples for Mitsubishi PLC iQ-R R04CPU using GX Works3, to compliment the Mitsubishi Ethernet manual Socket commands instructions. Unfortunately, the manual is missing real application ladder logic illustration examples of these commands. For example, the Socket Open Connection command, does not describe in what order or format to enter the IP Address.   For example, to enter IP Address 192.168.1.100, does the most significant octet 192 is entered or stored first in the lowest memory storage register (Big Endian format) or does the least significant octet 100 is entered or stored first in the lowest memory storage register (Little Endian format)? I am trying to write a simple Socket TCP/IP communications command that will write about four registers from an existing Mitsubishi PLC R04CPU (Socket Client) to an Allen Bradley PLC ControlLogix (Socket Server). .
  4. I'm using Controllogix L61 redundancy system as a slave with DCS using ethernet tcp/ip socket programming. The communication between master and slave will fail after a switchover. Kindly give solution for this. Thanks and regards, Rasu

  5. CX-Thermo program

    viliux112 posted a topic in Other Omron Software

    Hello, I am working with e5cc-t programs, for heating application. I need to find a way, to start program, when temperature reaches set-point of first (no. 0) segment. I think that, there should be some kind of setting, but i cant found it.. I've done this with PLC, but this is not an solution for this application. in conclusion: After program starts, it has to reach set point temp, and then hold temperature for certain time.  

  6. Version 2.0.2

    812 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  7. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  8. it possible to get the program backup form plc fx2n 48mr and roster it in 3u-48mr
  9. Second day using Proficy. Needing to cookie cut from a template program that references I/O devices in the HMI variables. Currently I have to edit each one individually, and there are thousands of tags to be changed, times the number of cloned systems I am creating. How can I automate this mind numbing, and error prone work?
  10. I got a CJ1M CPU11 that I can connect to but I can just go to run mode but when I try to switch to program mode I'm tell that I can modify the mode
  11. Good afternoon,   I need to convert a UINT (16-bit unsigned integer) to a DINT ( 32-bit signed integer).   Apparently we can't directly assign a UINT variable's value to a DINT's or vice versa. I also couldn't find a way of casting UINT as DINT.   The reason why I need to do it is because I'm receiving data from a socket. The RXLength is a UINT but in order to scroll through  the data array (USINT[1..1])  I need to use a DINT as the array's index, but I can't compare the array index to the array's length because they are incompatible types.   Is there a cast statement similar to:       myDINTvar := (DINT) myUINTvar;   I also tried the following but it didn't work:       myDINTvar :=  (myUINTvar * 1);   Any help will be deeply appreciated.   
  12. Hi at all! A little brief to understand my situation... I'm creating a new project with an analog input (4-20mA) to determine the level of a tank. The instrument send me a value that correspond 4mA => 0% and 20mA => 100%. With the AI_Conditioner UDFB from RA i can correctly rescale the mA value to a %.  Then I need to "estimate" the volume of that tank, so with radius and lenght i can calculate it (no problem so far). But after that, the value is too much variable (the 4-20mA is not very stable)... So to resolve I can accept to rounding to the nearest 20... But, how can I do? There is already an UDFB made for it? Thank you at all!
  13. hi.  i want to make some program that work with indirect adress. example, i make program with many much type. I make with Got-1000 mitsubishi.   can you bring me some example? i am sorry, my english is Bad
  14. I am unable to read FBD program in RSlogix 5000.It says editor not downloaded.I m able to see ladder logic programs.
  15. Im having some trouble with a PLC and looking for a some help. Whats happening is output number 3 is stuck on. I thought maybe it was just the PLC. I pulled the program tried it on a new PLC with no luck. I checked for faults and the handheld shows no major faults. The output that is stuck on is for a door, its telling it that the door is open. Any help would be great.

  16. Beckhoff PLC Counter

    DeadPool posted a topic in Other PLCs

    Hi everyone, I need some help with my PLC programming. I am currently using a twincat 2 software and a Beckhoff CX 8090. Basically, the gist of my program is to send and receive data and datalog the input data received from the sensors and timestamp the received data for every 1 second. I want to create a boot up counter where it will count the number of times my data logging program has restarted(if it did). This boot up counter serves as a health monitoring check to ensure that my program is running perfectly and thus, not restarting randomly when it shouldn't. I am more familiar with structured text so if you have a solution, kindly post it in structured text form. Your help would be greatly appreciated. Best regards, DeadPool

  17. ST program step count

    Nurlan_B posted a topic in Mitsubishi

    Hello everyone. I can't find my ST program step count in GX WORKS 2. Does anybody knows where is program step count in GX WORKS2 ?

  18. Example of a simple ladder logic program

    chinaplccenter posted a topic in Mitsubishi

     

  19. Alpha2 Help?

    Denzil posted a topic in Mitsubishi

    Hi Although I have used programming languages like basic and C for many years, I have recently tried to get to grips with programming (with the software (not direct)) the Alpha2 I have to admit that I am struggling! I have made a little progress since I worked out that you have to build almost everything at a very low level. But I still can not work out how you make variables that can be used in the program? For example : If condition A is true X = 10; But if condition A is false then X = 2. I have tried using the bit inputs on the math FBs to enable/disable values of X, but although this will initially alter the value , sending a 0 bit merely freezes the calculation and the value does not change. It seems like it should be such a simple thing to do? Is there a fundamental concept I am missing? Any help would be greatly appreciated

  20. Brian B

    BrianBoisvert posted a topic in General Topics - The Lounge

    I need help with a program I wrote for school that didn't work quite right.  I have to make a chasing light program that will freeze the lights when a PB is engaged and reverse when PB is engaged on light 1.  The assignment has already been turned in but our instructor ( if you want to call him that) has told us a similar sequence will be on the final.  Can anyone help me out??
  21. Dear Experts!!!   Could you please provide me the sample of "QD75MS Module & MR-J3-B program with functional block"    As you can see the page no. 3  in the attached document  "KI-Doc_QD77MSXX_MR-J3-XXBS.Zip" sample is there but i am not able to find it anywhere.   Or if you have any otherone please share it.   Please help!!! KIdoc_QD77servo_English_20130131.pdf

  22. Program not comparing

    Anoop R posted a topic in Siemens

    Dear Sir, I need to update the PLC program offline with online, so I tried to compare the program blocks but I got the error that The comparison of the two blocks in STL showed that codes are identical. But still when I want to go online it is giving error that codes are different. Can anybody help us in this? New Microsoft Excel Worksheet (2).xlsx

  23. CQM1H-CPU51 Download Program

    a.afkhami94 posted a topic in Omron

    hello...... i use of C200HS-CN220-EU Program Download Cable for downloading program to plc. i can work online but when transfer to plc error is check dip switch.... i read manual and dip switch table but cant set dip switch..... please help me to setting dip-switchs for C200HS-CN220-EU Program Download Cable...
  24. How to resolve my plc is stop working after download program from H1U-XP with autoshop v2. It show download plc program process but i don't have any program in ladder chart. Pls help...

  25. FX5U

    Ikhsan M posted a topic in Mitsubishi

    Halo, i have question and asking for help. my factory use mitsubishi plc type fx5u. can anyone help me how to setting everything that make motor servo can run. PLC : FX5U Ampli Servo : MR-J4-70A Thank you for helping me.