Search the Community
Showing results for tags 'image copy'.
Found 15 results
-
Good afternoon, I'm trying to add a custom image to the screen saver on the NA5 HMI, has anyone had experience with this? I can get to the screen saver setting on the device but there's only "Blank" screen as default, but I'd like to add my own image instead. Can anyone help? Thanks!
-
Hello group, Is it possible to copy the data string from a 1734-IB8S to a datatype such as an INT or DINT? When setting up the I/O with a Safety PLC, the discrete I/O is setup within the Safety Program but it's contained within the program itself. To utilize the same I/O points in a Continuous task requires inserting and remapping the I/O points to essentially the same tags. If the I/O data could be moved/copied to a global datatype within the Safety Program, it seems like it would reduce any redundancy in the Continuous tasks. Anyone done anything like that/ Suggestions?
-
Hello, I have used RSlogix5K for years and I am now creating NX/NJ PLC program. Is there a similar command to 'COP', which can copy ALL the data from a structured variable to either another equivalent structured variable or to a data array of some kind - e.g. a byte array? I thought the MemCopy command might do this but I believe it only handles arrays, not structured vars. Many Thanks Graeme
-
Hi every one, One of my machine i have to fix , has simatic pc unit installed that causing too much trouble and client want to replace it with simple pc with additional profibus card installed in PCI slot, is there any way to configure image of simatic pc in new simple pc
-
MELSEC Q12PRHCPU MEMORY COPY RESULTED TO FILE DIFF. ERROR 6000
Ravi@aoa posted a topic in Mitsubishi
Folks, we have a set of Mitsubishi Q12PRHCPU (redundant) running effortless since many years. CPU-A as standby and CPU-B as Control. Recently we noticed BATT low alarm on CPU-B. So we arranged for a spare battery Q6BAT and started the procedure as per manual(attached procedure and flow chart). We did memory copy from Control to standby (as prescribed precaution) and did the Reset of Standby PLC CPU-A. Memory copy from B to A completed successfully 100%. But the BACKUP LED did not turn Green from Red & Error LED kept flickering on standby CPU-A. CPU-B remain in Control but backup LED turned RED. From system monitoring we found that there is a Error 6000 (FILE DIFF.) observed in One of the .QPG (program 00-MDBUS.QPG). We tried to reset it but were not successful. We are surprised that why does the program differs when it was copied from CPU-B to CPU-A using the memory copy. Still we did the VERIFY and found no difference between the programs in CPU-A & CPU-B. Can anyone explain the cause of this issue and the solution. Please note that the CPU-B is still in control and plant is running. Backup LED on both CPU are red which means (redundancy loss) and error LED on standby CPU-A is flickering RED. There is no error in the CPU-A (Control) -we checked this using the GX Developer. Also attached here are the image of the error and error help. Thanks in advance. Battery Replacement procedure.pdf Battery Replacement procedure-Flow Chart.pdf Error.pdf MELSEC QCPU ERROR CODE 6000 FILE DIFF.pdf -
Copy array element to member of a structure
Famous_Fella posted a topic in NJ Series / Sysmac Studio
Hello, In my ladder program I have 7 different arrays (containing REAL values) all members of a structure and I wish to extract certain values from the arrays and put them on another structure consisting of REAL values (not arrays). Which is the best way to do that ? I tried AryMove command but I get an error "Conversion from REAL to ANY_ELEMENTARY[], ENUM[], STRUCT[] is impossible. To get a better understanding of my structures and arrays here is an example: Struct wheel_data Global variable SWheel of wheel_data rad[1...10] of real, vary[1...10] of real, varx[1...10] of real struct. 2 wheel Global variable Wheel1, .... , wheel10 of wheel rad REAL, vary REAL, varx REAL what I wish to do is to copy Swheel.rad[1] to wheel1.rad, Swheel.vary[1] to wheel1.vary, Swheel.varx[1] to wheel1.varx 2nd structure Swheel.rad[2] to wheel2.rad, Swheel.vary[2] to wheel2.vary, Swheel.varx[2] to wheel2.varx until I fill all 10 wheel structure instances with values Thanks in advance. -
In CX-Programmer software, we have the ability to make a bunch of copies of the same rung with the "Address Incrememntial Copy" Function. Does Sysmac Studio have a similar function?
-
Is it possible to change an image on a NA page with a subroutine. I have two images I want change between based on what happens on a page. The image control in VB does not show the imagefile property. Any idea on how I can do this.
-
Page 171 of the Crimson 2.0 manual for RedLion G3 HMI series talks about being able to display a photo/image as a primitive object. On the HMI G3 series that must use Crimson 2.0. The photo must be stored on the installed Compact Flash, using a command line utility program called "makepic". The manual mentions most of the steps required; but, like so many "instructions", the Devil is in the details. I need a little help to launch this user program .. kind of a "tutorial" Because I'm not really good with Command Line processes. Yes. Crimson 2.0 is dated stuff, and Crimson 3.0 is awesome.. and it's very easy to use pictures on your HMI with C3 (been there done that I'm new to C2 .. an' didn't appreciate what can happen if you purchase a RedLion G3 on eBay, without checking first if it can be configured with C3 ..DUH. I just need the starting steps to launch makepic" Thanks much, Regards, Michael
-
Hi, I am trying to change an image on a screen at runtime based on a user selection. With Me.FindElement(strObject) .Image = button .Width = 50 .Height = 50 .Top = 82 End With This does not work, and i can see that .Image is not an option for image, yet it shows on the property panel. StrObject is the image object that needs to be changed The variable button is a string that is the image title. Is there any way to do this? Any help would be appreciated. Thanks Coxie
-
Hello. How can I copy / paste more than one section from one CX-Programer Project to another project opened in another CX-Programer? Thanks.
-
While creating some pages yesterday for the NA HMI, using Studio V1.17, I went to look for "images" to make some cool buttons. Looking in Properties/Design/Image .. some research told me I'll need to look for a file on this path: C:\Program Files\OMRON\CX-One\CX-Designer\intaparts\BMPfiles\ problem was... I didn't have CX-One ... or any BMP files (related to Omron) So, the question is.. Did Sysmac Studio ever get around to providing such "Image files" for HMI objects? If so, can they be downloaded without having to purchase CX-One? Thanks, Regards, Michael
-
Getting UDT to work with physical IO
electric101 posted a topic in Allen Bradley / Rockwell Automation
Greetings, I'm here in my home lab trying to acquire a working knowledge of UDT's. I've had to work with them in the past in large existing programs and they were a pain to track down and find out what IO they were really controlling. I have a decent understanding of what they are and I've created several to play with here using my softlogix processor and a digital flex IO rack. My issue starts when i'm trying connect my UDT's to the physical IO. it looks like I cant use a simple move instruction (which would be way too easy and exactly what I need) I have a flex IO 8 point output. Local:1:O.Data[0] I have a UDT consisting of (see attachment) Valve001 Valve001.Out Valve001.Out.OPEN Valve001.Out.CLOSE Valve001.In Valve001.In.OPEN Valve001.In.CLOSED I have a copy instruction set to copy Valve001 to Local:1:O.Data[0] Length 2 that allows the Out.Open and Out.Close UDT's to control bits 0 and 1 of the 8 bit output . .... great. Now I have another UDT setup to control lighting... Door Door.Out.OPEN Door.Out.CLOSE I want to control bits 2 and 3 I make another copy instruction in a line before the original copy instruction that states Copy Door to Local:1:O.Data[0] Length 4 but i'm really just fighting for the same 2 bits that the valve controls.... how can I control bits 2 and 3 for the door/lighting logic using these UDT's? and that's not yet getting into having physical inputs moved/copied to the UDT input bits. thanks!! -
Hi, im from brazil and need some help, some days ago i buy a programmer CQM1-PRO01-E beacause one plc CPM2B are deceased, we have another equipaments with this one, but CX programmer not response and de are trying day after day, but with this programmer i want copy and paste the logic from other PLC. Can you help with copy and paste on programmer CQM1?
-
Hello Everyone, haven't roamed here for a while. So I'm having a little trouble using the Structure Data Type in Sysmac Studio/NJ. As an independent tool, it is powerful to create user data types, such as Ethernet/IP Tag Link to V680S RFID or any other EIP equipments. And it is way more powerful than the CJ2, since it has the ability for user defined offset, which CJ2 can't do. But the problem is we cannot move/copy the content of the members to any other standard types. For example, I have a structure with 8 BYTE type members. Then I need to send those out via UDP or TCP/IP comms, which Function Block requires BYTE[] data type. Unfortunately data movement instructions such as MemCopy and AryMove didn't work at all to do the job. This was easily done in CJ2 since we can access each memory content directly. Currently I already resort to use customized Functions which will translates the Structure into BYTE[], but that would mean for every different protocols, I need to create a different Function. I have seen this problem posted somewhere in the SS/NJ Improvement Request section, so I wonder has anyone know any update about this matter? Haven't checked the latest update yet (SS v1.14), but I'm certain that in SS v1.13 this feature is still unavailable. Thanks!!!
