Search the Community

Showing results for tags 'communication software'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 268 results

  1. OK,  I have a program in a Control Logix 5561 controller(ver. 19.52) that every time we go online with it, the communication between the PLC and the PC running RS5000 is so slow you cannot navigate the program efficiently. I am new to this facility but I noticed the programmer used 20 different periodic tasks to organize their program, mostly running at 30ms intervals. several are set to 10ms and some are even set to 3ms. I have gone through and found out that the short interval tasks have been overlapped 10's of millions of times, and the combined total of all scan times is over 160ms. I have a strong feeling this could be causing our comms bog down and possibly other erratic behavior but would like a second opinion. This machine has 2 indexing dials, with work stations that do work between indexes, Pick and Place operations, etc.  Is there even a need to be running these with periodic tasks? All thoughts are appreciated. Thank you
  2. Have a micrologix 1200R 1762-L40BWAR.  If anyone could help with providing the following information: Need a communication port with single receptacle that will mount through the door of electrical enclosure and then the communication cable (6 to 10') that will go from the com. port to the micrologix. Thanks
  3. Hi Friends, In My new project I have used two Delta PLC'S (DVP-60ES2 and DVP 14SS2) I want to communicate both through RS 485 Communication protocol.We have  tried communication trough manual help.But Master Slave device not communicating.We have checked for any error code in D1130 but it always showning "K0" value.here with I have attached screen shots and complete program for yours kind reference.Kindly help and guide us to communicate.   Master.pdf RS485 master trail 1.dvp Rs485 trail 1 slave.dvp Slave.pdf

  4. CompactLogix

    Anthony0307 posted a topic in Allen Bradley / Rockwell Automation

    Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony
  5. Hi Folks, I'm trying to establish communication with a CompactLogix L35E. I removed this processor from an used machine and I do not know the IP address. My Computer IP is 192.168.1.5. How can I establish communication? Any help will be highly appreciated. Thanks, Anthony
  6. I have OMRON CP1E PLC and I want to read memory address of PLC via serial communication. I want to use ESP8266 OR ARDIUNO OR PC Hyperterminal Please help me in any direction. How I should proceed?  

  7. MC protocol

    sczot posted a topic in Mitsubishi

    Hello once again, before I'll dive into mitsu manuals, does anyone of you know if there is some special relay signaling that PLC (FX3GE) have lost communication via MC protocol? Thank you in advance
  8. I have the following for sale. I would prefer to sell as a lot. I can send pics if there is any interest. EX40 + 20 IO Extension with 2 Unused output PCB for ext unit. 2 EX40 Plus PLC. Timer Counter access unit Operational. With 2 PCB with errors showing. Handheld Programmer (Squeekbox) excellent condition. CutlerHammer Original software with hardware dongle. Some spare parts, they were operational before I used for testing various functions. PM ME IF ANY INTEREST.

  9. 2 PLC WITH ONE HMI

    zubair136 posted a topic in Mitsubishi

    hi.   Can i connect two plc mitsubishi with one hmi . is so .. can u guide the connection between them . Hmi is of weintek.  one plc is FX1S and the second is FX2n
  10. hy everyone.. I want to communication inverter SJ700 to hmi mitsubishi GS2017 for read an code error in interface HMI? is it possible to communication between them?
  11. Hi everybody, I have a GT2310 communicating with the Mitsubishi F800 VFD. I am using the Freqrol 800 communication driver, connected to the RS-485 terminals of the GOT and on the F800. The comm settings are the same on both devices. I also tried to use the “auto negotiation” setup. I have communication between the two devices. I can read and write to F800 registers.   Anyways, The GT designer diagnostics is complaining about a communication error in the system alarms. The error can be reset but it will appear again.   This also happened when I created a new, empty project where just the communication was setup as described above.   Did anyone experienced the problem and how to troubleshoot / solve this?   Best regards
  12. Hello I have a problem with dl-ep1 ethernet modul. I connected the module to a IL-1000 sensor amplifier. There is some problem with the communication. How should I adjust ? I made some pic about the trouble. The sensor is a IL-600 laser distance sensor. I dont know yet how can I get the actual value.  Anybody knows how to set this modul ? If I think correctly after the right setting, if I check the sensor output:0 then, I can see the actual value of the IL-600 sensor. But unfortunatelly this part also not so clear for me, because I can connect about 15 sensor this ethernet modul.  Thank you so much if anybody help.
  13. HI All, i am new to this site, if anyone can help me out for below topic. I am trying to communicate E1101 hmi with Q06UDEH PLC but its giving me continuous communication error. i am using e designer for hmi and gxworks2 for programming. i am attaching the communication screen shots for both,i am quite stuck at this point as i have used all options still not able to solve it. if anyone can help me out with this,help is much appreciated. Thanks in advance  

  14. error HMI in proface GP477R-EG11

    diraemon posted a topic in Mitsubishi

    Hi everybody, can someone help me, to solve my problem with commnunication error. ??? I have plc Q03UDVCPU using module QJ71C24N and HMI proface GP477R-EG11  using RS 422.. I had connected them but still error.. Side hmi that im connect is 10 RDA to SDA 11 SDA to RDB 15 SDB to RDB 16 RDB to SDB 7 SG to SG  
  15. i am new in indusoft web studio. i am facing a problem about communication of indusoft with plc.   i am communicating with plc through fx2n-422-bd card.   can some one guide me the steps of communication.  he/she will be a life saver.. as i am  in a deep trouble
  16. Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?

  17. Function Block

    printengineer posted a topic in CX-Programmer

    Where would I find TC_2PID_Function_BLOCK? as described in the Temperature Regulation Solution, Quick Start Guide v1.02 Is there somewhere on the omron web site to find all up to date FB Libraries?

  18. CP1E RS232 communication to my weighing

    riandanualdy posted a topic in Omron

    hello, i want to connect CP1E to EK300i (weighing scale) with RS232 communication. i attach file of datasheet ek300i, wiring CP1E to ek300i and my cx programmer. if i push send data on ek300i, com LED indicator in CP1E is on. and i dont know why my cx programmer can't change data of memory with data from ek300i? what should i do?   ek300i.pdf CP1E to EK300i rs232 communication (belum dicoba).cxp CP1E to EK300i rs232 communication (belum dicoba).opt wiring rs232 ek300i to CP1E (belum dicoba).txt

  19. FX3U PLC Serial Comm over W-LAN

    Xubaer posted a topic in Mitsubishi

    Hello every one. I have three FX3U plc needed to be communicate over a wireless network. I'm using serial adapter FX3U-485ADP. I got E-byte data trans reciver E-30 for wireless communication. Now need help to setup the whole thing. Previously the PLC's serial connectors were connected through a flexible bus but when the platforms are running fast there is interruption in the  communication. So we want those PLC's to be connected over wifi.  Thanks in Advance 
  20. Anyone know any free libary to communication with FX3u-enet-adp, please help me ? Note: I've used mx Component , it work very well but it is too expensive and I dont even know it can work in windows server 2012/2016 or not.  one more question, Is there otherway to make program run in other computer without install mx compoment, it is very huge to install in every client computer Thank for reading and sorry for my bad english  
  21. i am using a VSD Altivar71 and controlling it through serial MODBUS communication, the probllem is sometimes after stoping the motor the drives gives the "nst" fault which means according to the programming catalouge "freewheel stop" it doesn't do that all the time but it happens a lot and after uploading the code again to plc the problem is gone for a while before it happens again. i am sure that the fault is happening because if communication because when i controll the drive from hmi it never gives that fault, i checked the setting and tried different cables but it still gives "nst" and motor never moves, i found that in catalouge but i am not sure how to address the problem.
  22. My apologies for being a newbie on this, but could someone save me on this... I have a Viper 650 and an eMB-60R controller which I want to control by ePLC connection using an NJ501-1300 PLC unit, SYSMAC Studio with EIP Adept Library for Robot... All are starting up well, and I connect all components to a switch hub...  But following the ePLC guidelines, the IP Address showing on the controller is 172.16.132.111 I change the IPV4 IP Address on the PC settings to 172.16.132.10 and the subnet to 255.255.0.0 but the Adept IP Address Setting Tool on SYSMAC doesn't detect the Robot IP Address, also i tried ipconfig on command prompt which shows a different IP Address IPV4 169.254.197.75 and subnet of 255.255.0.0, I changed the previous setting on the PC setting to 169.254.197.10 with the same subnet. But still PC doesn't recognize. I tried both configurations if ACE Software can detect it but the same ACE can not detect it also... Appreciate any thoughts on what's wrong in my configurations. Thank you.

  23. Fuji Wsz plc

    Gscont posted a topic in Other PLCs

    Please send Fuji Wsz plc software download link  

  24. Fuji Wsz plc

    Gscont posted a topic in Other PLCs

    Please send Plc software link

  25. Stripped down HMI Software

    Beau posted a topic in HMI & SCADA

    Currently, our SCADA setup uses Kepware, Wonderware, and Canary Labs data logger and historian. The data flow is as follows:  PLCs --> Kepware (on PC near process) Kepware --> Canary Data Logger (on PC near process) Canary Data Logger --> Canary Historian (on Server) Canary Historian --> Canary Axiom Viewer Client (on engineer's PC) We use Wonderware as an HMI on the Process PC to control the process. As many will know, this is very wasteful as Wonderware includes many other features and we are paying for all of them yet using only the HMI feature. Our goal is to cut Wonderware out of the equation (i am aware that Wonderware  could replace both Canary and Kepware with its data logger and OPC server features but this is the direction that was chosen so we are going with it).  My question is: Does anyone know of any simple and cheap (-er than Wonderware) PC-based HMI software that could replace Wonderware on the Process PC?