Search the Community

Showing results for tags ' architecture design this driver can be conviniently used with visual studio in development of complete large scale complex hmi/scada systems. it can be used to perform advanced reporting mes'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 385 results

  1. I am using PLC Modicon M221, I want to make communication between PLC Modicon M221 to OPC Kepware by modbus tcp/ip ethernet. In PLC, I use software somachine basic, I set digital input and digital output. And in OPC Kepware my address  00001, but when I switch turn On/Off in PLC, value in OPC Kepware doesnt change. Could you please correct me? Thank you   Bujang
  2. Hello, I am looking for a way to programatically select a recipe. Any time that a recipe is change or saved, the recipe viewer object always resets its view and selects the first recipe. This will lead to possibly writing the wrong recipe to the controller, as well as frustrate the user if they have to scroll through a hundred items to find the recipe again. I looked at the VB functions, but the only one I could find that was close was the .SelectedRecipe, which is a read only. I am using Sysmac Studio v1.1.7, and an NA5 HMI. Any help would be appreciated.

  3. Siemens IPC477D Touchscreen Driver Needed

    EMD-Godzilla posted a topic in Siemens

    I have reloaded a IPC477D with Windows 7 64-bit and everything is working but since we do not have the original installation disk or ISO, we have no way to load the touchscreen driver. I am looking for any information that would lead me to the OEM for the touchscreen or if anyone has access to the IPC installation DVD, all we need is the touchscreen driver directory which should have both the 32-bit and 64-bit version. Siemens tech support indicated we must repurchase a installation DVD for $350.00 and it would ship from the fatherland and be here in about a week. Thanks in advance.

  4. MBE Driver can't save config file

    horvatmiha posted a topic in GE

    Hello!I am using MBE Driver v7.46b on Windows Server 2012 R2. Problem is that I can't save config file. I can edit Channels, devices and data blocks, I can see incomming values, I save a file without any message. But config file is not saved. In Event viewer I get error as you can see on picture. It says: Error writing to system registry: Driver App 00000001 \Driver defaults. Other error says: Error writing to system registry: ServerMsg 00C54BB8 \Driver defaults.Is it server or driver problem? Please help. At the moment I can't edit anything in driver so I can't configure it to use it with my SCADA iFIX 5.8
  5. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!

  6. S7-1200 with SCADA driver S7A not working

    horvatmiha posted a topic in Siemens

    Hello! I am trying to connect my PLC with SCADA. I am using S7-1200 1212C CPU (RELAY outputs). My SCADA system is iFIX 5.8 with driver S7A. I am trying to establish connection via GPRS router (TCP/IP). Port being used is 102 (default by S7A driver). In my company we have private network, SIM card in GPRS router gets static IP (set by RADIUS server)  which is 10.247.XXX.XXX. My PLC has IP 192.168.0.10 set in Project. I am not sure what am I doing wrong. How to correctly set IP address in PLC to communicate in private network via GPRS router with static IP? I already enabled TCP port 102 in my router but I am not sure to which IP should I enable it because I am not sure if IP address set in PLC is correct. Should I use some communication blocks in program? I also enabled PUT/GET function (see attached pictures). Please help. Thanks in advance! :)  
  7.   Haiwell large-screen controller TV BOX can realize the large-screen display of HMI images in the LAN. User can select, switch and view multiple touch screen images on the TV screen, and realize the function of large traditional electronic display board in the most cost-effective way. Through TVBOX, different sizes of touch screen images can be displayed on the TV screen. The scada, curve, formula, user rights and other functions on the HMI can be displayed on the large screen.Users can use remote controller or mouse by USB interface of TVBOX to realize the remote operation and monitoring of the HMI.   One TVBOX, one TV, and multiple HMIs can easily realize the function of big electronic display board, which is widely used in agricultural greenhouses, aquaculture, libraries, production workshops and other large screen data monitoring and display applications. Remote management : Supports display, access, and remote control of HMI within the LAN.     There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: http://en.haiwell.com
  8. There are so many industrial automation suppliers, it is really a headache issue to pick right partner to work with. Haiwell partners are applied Haiwell solutions in smart factory. Now we are looking for global distributors. So it is time to make up your final decision. To win or lose, your choice. If you are ready, check bellow details and contact us: What Haiwell do, not only PLC, not only HMI, or even SCADA. We are helping our partners to grab the future.   My Wechat/Whatsapp: 0086 15880530763 Email: osgood@haiwell.com Company website: en.haiwell.com  
  9. Hi, Now I am using Sysmac Studio - NA HMI. I am facing the problem of Data edit tool here I am unable to give Indirect address. Like this address HM15_Recipe_hmi(Index_No).SetPoint_1 But If I give direct Address its working HM15_Recipe_hmi(8).SetPoint_1   I Hope someone give the solution.    
  10. Hello - Not sure if this is the right place, I apologize if not. Just let me know if I need to move it and can delete and do so. But I am currently working on a project where I am collecting seeds (flower seeds, etc.) and when a certain weight limit is met I'll be turning off a vibratory bowl and opening a chute, etc. Looking for some ideas on the scale and how to do that process in particular. The smallest collection weight will be around 100mg, largest around 8g.  Mainly looking for ideas on the scale.  Thanks for any help/tips, much appreciate.
  11. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link: https://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm085_-en-p.pdf
  12. What Is Meaning Of Universal Analog Input Card?
  13. Hello. I'm trying to connect to Microsoft SQL Server (2008 EXPRESS), but the connection is not working. I have done this in Citect SCADA 2018 without any problems using connection string: hSQL = SQLConnect("SCADA Data Provider=SQLClient.....) How can I connect to MS SQL Server using Citect 6.1? Thanks. Best regards.
  14. Hi, I have a a few substations and I´d like to have a local SCADA in each of them. What is the best scada to use with reasonable price? Does anyone know if there is a solution without the need to have a PC for each substation? Thanx
  15. Hey, I am fairly new to the NA screen so I didn't get time to research much but for some bizarre reason, if my alarm message is long instead of going to the next line it just continues. Is there a specific way of creating a multiline alarm. Any suggestion or if you have inside for a crash course on NA screen would be helpful. Thanks

  16. Honeywell Experion SCADA

    jdj230 posted a topic in Other PLCs

    I haven't used Experion before, nor do I have a licence or access to a download of the application. As such I want to know how limited an unlicensed version of the product is. Is it like Citect where you may develop graphics but need a license for runtime, or is it like FTView where you need a license just to open the application? Thanks in advance
  17. If you’re looking for a SCADA with extensive support for a wide range of PLCs and protocols, check out IntegraXor. It’s robust, feature-packed, and user friendly. The built-in web HMI lets you access your processes anywhere, anytime, on any device. Official Website
  18. Hello:   I need to link  a lot of variables, pointing to CIO address, like "AT" field, but is a large volume of tags to create, so, I have a chance to assign a memory location to a variable in ST like:  my_tag := %100;  (trying to assign tag address to CIO 100) ? If not, there is a method to import tags from a Excel ?   Thanks.    
  19. Hello:   Im new on this foroum, and Im glad to become a member, and new on the Sysmac studio too . I have the following ST program line: My_array[0]:= y[0];   Where My_array, is a array of bool, and y array too. After load and all, on monitoring return a "!" Sign, and trying to change value retuns "Failed to write variable, check if variable or memory area are alloed to write". I tried to move both arrays from global to local, and change adressing in "AT" field, witout changes. Any help will be wellcome. Thanks in advance Dante  

  20. C-mode hostlink library for NJ/NX1P or CP1L

    Patrik Arvhult posted a topic in Omron

    Anyone knows if there is a C-mode hostlink library for NJ/NX ? Also, a C-mode hostlink library for CP1L could be helpful, to translate such a library to work with NX1P is probaly less work whan writing a new library.  Maybe Omron France has developed such a library? - they seem very active..   Background: Looking into writing a programmatic c-mode hostlink master for NX1P12, this is for connecting the handheld NSH5 HMI to the NX1P12 via RS232C using a CIF01. I have the hardware set up, and an machine built, expected some compatibility efforts by Omron.... but the NSH5 seems to talk C-mode hostlink, and the CIF01 only seems to support the FINS version hostlink.   On the NJ you can of course add an SCU module, thus not need a library.  But working with NX1 ( due to limited space available ), you are dependet on available CIF-modules which do not support C-mode hostlink.  
  21. How to watch the value in decimal directly in the ladder page ?  Default Hexadecimal The only way I can do it is in Watch Tab and I/O map per example Thank you
  22. i am new in indusoft web studio. i am facing a problem about communication of indusoft with plc.   i am communicating with plc through fx2n-422-bd card.   can some one guide me the steps of communication.  he/she will be a life saver.. as i am  in a deep trouble
  23. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  24. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!

  25. Compare data RS232

    riandanualdy posted a topic in CX-Programmer

    Halo, my name is Riandanu, I connect PLC Omron CP1E to weighing scale, and its done. i think i dont have problem between PLC and weighing scale. And i want to ask about, how to compare value from weighing scale ?  example : from the picture you can see value of weighing scale is " ST,+00160.66  g", and i want to compare it with 180 or 150 to give output on to lamp. Thankyou Riandanu       PLC to ek-i.cxp