Search the Community
Showing results for tags 'sysmac hyphen dash ascii'.
Found 235 results
-
Dear All. I have the issued with NX1P2 when read data from Modbus RTU. the Slave data using 2 INT for Real data. but in the Sysmac Studio I get the data is OK, 2 INT but can not convert to Real data. Can you pls help me to solve this issued. also I want to convert from Real to 2 INT to send the setting to salve. Many thanks.
-
Hey folksI'm trying to make a Ladder program in Sysmac Studio to control a Crane.The crane gets via a HMI a position that it must drive to, first at high speed then in low speed this is controlled via encoder signal for fine positioning there are several sensors.For all this I have an NX1P2-9B24DT1, NX-EC0222 and 3G3MX2-A4030-ESomeone here who can help me with an example of how this can be done in Ladder.Many thanks in advance for your help.
-
Hi. I have a decent workstation I work on when i do my programming. I have been using Sysmac studio for couple of years now and I have always notice it that sysmac studio is very slow. Have you guys notice that sysmac in general is slow ? /Best regards.
-
Hey Guys, So i am working with Omron software to integrate it with the HMI screen. Whenever I receive a user alarm, I have an acknowledge button on the screen, but when I click on it, the alarm does not go away from the screen, it is acknowledged though. Can anyone please guide me to what changes I have to make in the system to make the alarm notification go away, or is this any sort of a bug in the Omron software ?? Please help guys !!!
-
MOTOR REPLACEMENT DETECTED ERROR (95.01) ON 1S SERVO
ASHISH CHABHADIYA posted a topic in NJ Series / Sysmac Studio
Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance... -
I am working on project where I need to program delta PLC to receive ASCII code from scanner. I anyone know how to program it helpls me alot.
-
Hey everyone, I did a quick search in here and couldn't find the answer to my question, so I'll post it here. I am starting up a machine and adding/correcting alarms on the fly and came across an issue. Some how a Internal variable in one section of ladder has the same name as my global variable that I need to use and now I cannot put the global tag in that file. Is there a way this can be done while the PLC is in run mode or do I have to go off line, delete the internal variable, add the global variable and then redownload? PLC is NX100
-
I don't suppose there is anyway to modify the popup Alarm Notification? I know you can press the Acknowledge and get it to clear...most of the time, but it always seems to be right in the way when it does pop up. I can move visual data to a different part of the screen that I want to see when an Alarm appears, but I'd rather be able to move the Alarm Popup or Resize it all together.... Thanks,
-
Micro 850- ASCII query/command and response
Arceus posted a topic in Allen Bradley / Rockwell Automation
Hello all, I am working on a project where I am communicating with a Mensor CPT6100 pressure transducer using a Micro-850 PLC. For this, I have used an AWA instruction to write some ASCII characters to the sensor. The sensor then responds to the write instruction by sending ASCII characters to the RX buffer and I used ACB and ARD instructions to read the ASCII characters. Now, I have set the ACB trigger type to 0 (msg triggered only once) and it successfully reads from the sensor. However, when I set the ACB trigger type to 1 (msg triggered multiple times), I do not get any reading in the ARD block. As a matter of fact, the ACB Q bit switches off every time the program is executed when the trigger type is set to 1. I am trying to get continuous readings from the sensor, but when the trigger type is set to 0, the program latches on to the first and only reading and it won't change. My question is, how can I change my program so that it can continuously and autonomously read from the sensor without me having to manually trigger the AWA and ACB instructions every time. I am attaching the program to this thread for your reference. ASCII_Test_Copy.ccwarc -
Hello Guys, I would like to know if someone in here has made a VB script, there can delete files from the SD card in HMI? the reason why I ask, is I have some data logging on the HMI for our customer, but I would like the data logging to go in a loop so if the SD-card is full, it will delete the oldest file instead of stop data logging. who is there somebody there can show me an example on a VB for this :)?
-
Hi: I am planning to use NX with Encoder Card couple with Omron Rotary Encoder for measuring product length. ( GX-EC0211 /EC0241) or may be (NX-EC0112, I read there is proble with this card , here https://forums.mrplc.com/index.php?/topic/34896-problem-pulse-reading-with-fast-counter-card-in-nx2/ ), but whatever it is I need to know is there any specific Instruction in Sysmac Studio that is tailored for Fast Counter or Encoder (something Like PRV in CX Programmer or special function in CJ-CT021 where start/stop counter and changeable preset counter are available). The Length measurement is straight forward and is only a small part of the overall program. Basically is Start ---> measure to length----> Cut --->Repeat again. I read through the Instruction Reference Manual and I am unable to find one. Anyone have any idea or any sample program (Sysmac Studio only ) that I can refer to ? Thanks
-
Ethernet/IP Connection with Keyence IV-G series
microkana posted a topic in NJ Series / Sysmac Studio
Hi there, I am considerably new with setting up E/IP on OMRON's NX1P2 PLC. I have been trying to connect a Keyence IV-G to my PLC with E/IP connection (because there's no analog I/O available) and struggling with getting a connection going between PLC and camera. I connect these two through an unmanaged network switch, which I believe doesn't need any further configuration. I have set tags on Built-in E/IP inside SYSMAC Studio, and when I monitor them it says "normally resolved". Unfortunately, it still has red dot which means connection is cannot be established. The error I'm getting is "Tag data link connection timeout". Maybe built-in E/Ip just doesnt work for this case? I have yet to try getting connected with Network Configurator, but have the feeling that it will just accomplish the same thing that I did with Built-in E/IP inside Sysmac Studio. -
Hi guys, so i'm trying to send data to plc omron cp2e-n40dra via RS232C, I use RXD and TXD but it looks like my programs are wrong, the indicator of RS232C are on everytime i send the data so it looks like PLC receive my data but when i see it in memory PLC D i can't find any data stored. Can anyone help me please? I attach my Gdrive for pictures since i can't upload pictures in here *The data that i sent is in ASCII https://drive.google.com/drive/folders/1GPXa1U1PLMU2WKmo4YRPe32wHHyVCGUv?usp=sharing
-
Micro 850- ASCII query/command and response
Arceus posted a topic in Allen Bradley / Rockwell Automation
I have been working on a PLC project that requires sending ASCII commands/queries to an external pressure transducer using the Micro 850 PLC (2080-SERIALISOL module) via serial port communication (ASCII protocol) and in response the PLC would read pressure readings from the transducer. I was able to write a ladder logic program that reads ASCII code from the transducer and converts it into string and inversely converts string output from the computer to ASCII and sends it to the transducer. However, I am uncertain as to how I should send the command string from my computer so that the external transducer receives it, recognizes it after the <cr><lf> is encountered and sends a pressure reading. Any suggestions as to how I can type in commands from my computer and receive responses from the transducer? -
I have a function that reads ASCII code from a transducer, converts the code into characters and places the characters from the serial buffer into a string. Now, I am trying to convert the value in the string into a 64-bit float number. Any ideas on how to do that on the CCW?
-
Hi I want to use in sysmac the number of the active page in nb designer. for example if I am in page number 5, the program in sysmac recovers in a variable the value 5 THANKS
-
Our C axis which is a rotary axis doesn't perform commanded postion, for eg if we give command of 360 deg, then it will only rotate 359 deg and for next time it will rotate 358 and so on for every rotation. i.e for every rotation its complete degree is reduced by 1 deg. And system doesnt show any error. By providing command of 360 deg, if we rotate or axis for 15 times then the last position at which it will stop will he 345 deg. Please share valuable inputs to resolve that problem.
-
Hello, I am trying to have single press and double press etc. functionality in my PLC program where for example, single press will turn on the motor whereas double press will turn on the motor for 5 seconds. Is it possible to achieve using ladder logic in sysmac studio, if yes, how? Thank you in advance.
-
hello I want to control my servomotor in manual mode from an ethercat network. Where I can find the JOG FWD and REV information in the frames exchanged between R88d-1S servo and sysmac studio
-
In omron Sysmac Under configuration tab --- axis setting----- Operation Setting Under Monitor Heading there is a term " In-Position Range" and " Zero Position Range " what does these term means and what happen if we increase or decrease value under these term. Image was not attached, as it was failed due to some reason
-
Hello, can we do the simulation between sysmac and nb designer thanks
-
Good Morning I am a beginner in PLC programming using the Sysmac Studio software and please help me if you can I'm trying to make an omron NX1P2 PLC read some message via Socket UDP to my PC through the Socket Test program, do you have or know any program with an example application in ladder? thank you
-
Hello everyone, In Siemens and Rockwell I am used to transferring a double word to a tag that has a UDT data type of 32 bools. Which the binary bits (31..0) of the double word would align with the bits in a UDT data type of bool. If it was in a function block in Siemens I would call the double word address and move it to Area Register Address and transfer data to a tag of udt data type internal of the function block or could call a Move Block as well which will byte swap the bits but can be fixed with an STL call instruction (CAW). Since I am new to Sysmac Studio, how would I be able to do this? Looking at every Data Movement and Data Type Conversion functions all want a form of an array or elementary type, some wanting source and destination to be the same type. Any ideas?
-
Can I simulate NJ controller and NB designer HMI on one Laptop
MedSelmi posted a topic in NJ Series / Sysmac Studio
Hello, Sorry I'm newbie with omron plc programming. I'm wondering how can i simulate plc program on sysmac studio with Hmi on Nb designer without hardware. because I want testing my program and my plc and hmi connection before buying hardware. Thanks in advance ! -
I have a simple question that might be hard to answer: Is it contraindicated to set tags that are continuously updated, such as analog values, as "Retained" ? I'm not sure if "Retained" values are in flash, and if they're written every time the value changes or only on power loss. I have a background in embedded programming, where I had to take memory write cycles into account. I'm working on my first SYSMAC project, and I'm used to Allen Bradley at this point, where FB instances are accessible from everywhere. The fact we cant read or write function blocks from the HMI in SYSMAC is a pain. As a workaround, I'm using structures and I would prefer not splitting the parameters and working-values in different structures. This is my first post here and I didn't see a search function, so I apologize if this was already answered.