Search the Community

Showing results for tags 'how to interface cx-programmer and cx-supervisor?'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 101 results

  1. Trying to connect our old Sysmac C200HE PLC to the CX-Programmer software however, failed connection appears. We are using a USB-Serial connection and have set up the comms on the device manager. To try and connect to the PLC we are using the Auto connect function, selecting the usb-serial connection and selecting the comms the same as the host network. Any help would be greatly appreciated.
  2. Hi, I can’t find an answer to the following and I was advised to ask it here.I’m programming an Omron CJ2M with an MD212 high speed I/O card. I usually do all my programming in Structured text, simply because I like it a lot over ladder or sft.Now, if I want to read the hight speed counter (incremental encoder), I have to make a ladder section and use the PRV instruction to store the present value in a chosen location.The manual says the current PV is stored in A271, but I can’t get a readout there. Apparently the only way to read it is through this instruction.Does anyone know if there is an equivalent to the PRV instruction for Structured text? or another way perhaps? Again, when I check the actual memory adress, there’s no value there withouth the use of the PRV instr.
  3. Hii sir, This is praveen from india, actually i am working on Industrty 4.0 related, Please help me in Omron PLC Data Collection like Read Holding Register, Read Coil, Read Discrete Input. Omron PLC CJ2M-CPU11 (is that possible to Read data through MODBUS RS232 in Omron CP1E-N20) Please do the needful thing awaiting for your Response. thanks, Praveen cp praveen.cp96@gmail.com +91 8015858544
  4. I have a legacy application with [PRINT] buttons on many of the screens. The screens are very simple with text and boxes as frames around the text. The [Print] button calls the CX-Supervisor script: where FALSE suppresses the print dialog. Figure 1. One of eight of the temperature control boxes. I have upgraded to CX-Supervisor 3.41 Developer and Runtime for a couple of modifications. Now when we print the text comes out OK but the graphics (the boxes) are about eight times the correct size and overlay the text. This happens when printing to the printer and to XPS. Figure 2. The eight temperature texts and the giant boxes on an A4 XPS file. (It's the same when printed directly to printer.) Has anyone seen anything similar? Is there a fix? Many thanks.
  5. CP1H Communication HElp

    Hi - I had an old lab PC running software made in CX-Supervisor to control equipment attached to a CP1H (I did not make the software).  The CP1H connects to the PC with a RS232.  The PC running the software died, but I have the files copied onto a new PC.  I have installed the latest CX-Supervisor software, when I open my program file from the old PC I have a communication error (attached).  Where do I setup the new PC to communicate with the CP1H? Thank you
  6. Ethernet/IP bandwidth

    Hello, A while ago I modernised a magazine gathering / filmwrapping machine. This was a fairly big project for which I used an Omron CJ2M as the main PLC, 10 Wago Ethernet/IP fieldbus couplers, a Keyence CV-X420 vision camera and an Omron NS12 HMI.  All of these components run on the same network which contains an unmanaged switch where the HMI, PLC and the first Wago are connected. The Wago’s act as a two port switch since they are all daisy chained. At the end of the Wago chain there is also the vision cam which is connected at the last Wago coupler. At the time I was advised against using Broadcasting instead of Multicasting with a managed switch, but I tried anyway since my networking knowlege is lacking. Also, the only ‘bandwidth demanding data’ comes from the vision system. The Wago couplers contain only digital I/O and high speed encoder inputs run directly to the CJ2M. I haven’t run into any trouble so far and the machine is already producing for over a year. Now , a new project is on the way and it will need even more Ethernet couplers, 15 to be precise.  This brings me to my question; is there a limit to the number of nodes in an Ethernet/IP network and will I possibly run in to bandwidth problems by adding more remote I/O and not using a mannaged switch? Also, I would like to get high speed input out of one of the Wago couplers. Thanks in advance for any feedback! Greetings from Holland Andy 
  7. Cannot get Online - CPM2C

    Hello Ladies and Gents, Im quite new to working with Omron. I am struggling very much to get online with an Omron CPM2C-S110C. It has a CIF01 card also. I hear this PLC is quite an old one. I have referenced the manual on 'connecting a computer running support software' and double checked I have the correct cables. The ones I am using and the way I am connecting is:-   PLC Peripheral slot >> CS1W-CN118 >> XW2Z-200S-CV >> serial to USB >> Laptop Checking on Device Manager, I have all the drivers installed, the comms ports are correctly numbered yet I still cannot connect. There are 4 dip switches on the top right hand side of the CPU and all are swiched off. I have called Omron Tech Support and they said to ignore them in this instance. The RS232C port on the CIF01 is used by a barcode scanner so there is no means to connect through that (I have been told) I feel that I have been through setting and checked in CX-Programmer and nothing looks obscure. Please offer me any ideas you may have. I would greatly appreciate it. Thank you.
  8. Hello,   Was extracting PLC program from a Chinese machine and the comments was shown incorrectly as symbols instead of Chinese characters. The Laptop used does support Chinese Language so why does the PLC program pulled from the machine does not show the comments correctly?
  9. Combination Input

    Hi.. I'm new into PLC programming so I dont really know much how to program.. So hopefully there is someone out there that can help me with this or give me some ideas.. Here is the problem; I got 2 inputs signal, A & B.. from this 2 input signal, there will be variable combination of 4 inputs and it will produce different output let say in condition; 1. AAAB - Output 1 2. AABA - Output 2 3. AABB - Output 3 4. ABAA - Output 4 . . . n. BBBB - Output n   I'm open to any suggestion and ideas for this.. Btw I'm using OMRON CP1H for this one..  Thank you
  10. Hello,      I make a project where I should control temperature for thermoplastic extruder. I read for this type of process a two position controller is enough but I want to use a PID controller. I have values for P,I,D,Tf and I applied Z-transform and I have a numeric controller which is implemented through structured list.  I want to control heating element with this PID but my problem is I don't have an analogue output module just a digital output module(OD 212) and now my question is : How I can( if it is possible) to control duty of PWM with output from pid?  (I have a CJ2M processor)
  11. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  12. Hello      I have a cj2m processor and md211 module and I want to read position from rotary encoders who are put on the stepper motors. I use high speed counters to count the number of(I made settings like in documentation) but every time I read velocity.   In first two picture I have 3 blocks for PRV function , I set port specifier [#0, #1 and #3] because on this ports I command 3 axis. Please help me!              
  13. High speed counter

    Hello!       I wrote a ladder program where I use PRV function for reading current position from rotary encoder. My issue is I received data on PRV only when Oringin_Search is on, I want to read value without Origin_Search active. I tried with High speed counter but  I don't receive  values. I used port's 0,1, 3 because I have three servomotors with encoders. I have CJ2M CPU and MD211 Module.
  14. Hello,      I want to make an application to control a heater element . I have a thermocouple(k) , I read value from it with ad04u module and with od212 module I want to control the heater element with PWM. Now that's my problem , I don't know how to configure in cx-programmer to put on output from od212 pwm signal. I read in documentation about Pwm but is a poor explication about this problem. (I use CJ2M processor). What else conditions must to check for I can work with pwm signal?
  15. Hello people, I hope someone can help me with this. The system is connected with 8 PLC's. I want to transfer the data memory of a PLC to another like this: D850 from PLC2 to D900 PLC1 D850 from PLC3 to D901 PLC1 D850 from PLC4 to D902 PLC1 D850 from PLC5 to D903 PLC1 D850 from PLC6 to D904 PLC1 D850 from PLC7 to D905 PLC1 D850 from PLC8 to D906 PLC1 The data memory is an integer.
  16. Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!  
  17. MTA10

    I need to replace MTA10 interface. How to transfer program to another one?  
  18. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  19. Lets say I worked in a factory that made multiple models of parts. I need to run data tracing on the off shift due to certain models only running on 2nd and 3rd shift. I want one data trace to capture one group of bits at Model 1, Then reset the Data Points and run again for Model 2, Model 3 and so on. So the Bits that I am mapping with the trace need to change.  I can change the trigger easy enough with my program. I see in the manual the CPU has a "separate memory area" for trace settings. Can this area be accessed from the Program so I can set my bit addresses to monitor to a word or E_?   See attached pic for clarification of what I aim to change through the program.   
  20. hello.   I've been trying to communicate this omron plc CP1L-EM30DT1-D, with a yaskawa inverter cimr-vu4a0004faa. but i can't figure out how to make de correct mov or configuration in de DM. i need to run/stop, change frequency.    some help, please. :) 485PRUEBA.cxp 485PRUEBA.opt
  21. I have the following for sale. I would prefer to sell as a lot. I can send pics if there is any interest. EX40 + 20 IO Extension with 2 Unused output PCB for ext unit. 2 EX40 Plus PLC. Timer Counter access unit Operational. With 2 PCB with errors showing. Handheld Programmer (Squeekbox) excellent condition. CutlerHammer Original software with hardware dongle. Some spare parts, they were operational before I used for testing various functions. PM ME IF ANY INTEREST.
  22. Dear All,  I am new for OMRON and my project is need to control VSD on PID function and I using Omron CP1E-N30S1DR connected CP1W-MAD44 (AI/AO is 0-12000) for AI/AO..  My programming did followed PIDAT instruction.. and MV output still inactive.. I am not really sure that my programming is correct or not..? Could every one help me to check my program in attached .. please  I using D400 as SV & PID parameter , D500 as MV.. and I do not move D500 to analog output word yet coz D500 still inactive..  Looking for every one reply ASAP..   MMI_2018_v1.cxp
  23. I can't simulate the cx-programmer application, before it could work. My CX-ONE has been licensed.   What Should I Do?
  24. Hi, is it possible to communicate between the Sysmac studio simulator and the CX-Programmer simulator? I want to test the exchange of data between a NX1P2 and a CJ2H, but I don't have the controllers with me. Thanks and have a great day!
  25. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf