Search the Community
Showing results for tags 'omron cj2m timer'.
Found 596 results
-
Hi; I have a DUPONT brand machine having OMRON PLC CQM1-CPU21-E. I have CX Programmer installed in my Laptop having W1indow10. I want to go online but finding a way forward. I have an interface unit OMRON CPM1-CIF01 but failed to build communication. Please help me out.
-
HI all i was wondering if it might be possible to edit the name of a word switches state. I'm creating blank presets for a machine lets say 1-10, i would like to use the drop down word switch which would display preset 1-10. is it then possible to edit preset 1's name to something like "8mm diameter" by using the notepad function on nb designer and directing that to some location on the plc? any idea or different methods would be great, or even if its not possible. thanks
-
Hi, I'm having a little trouble connecting to a PLC from my program. I thought my previous post a few months ago fixed it, but apparently it did not do much. Here is my code: And here is the resulting reply from the PLC after converting it to hexadecimal So far, I've narrowed it down to the issue that my program is sending 64 instead of the 18 that was specified by the FINS command. I assume that the received error is due to the fact that the PLC did not receive the correct instructions from my program. The "End" is not sent by the PLC, it is a personal note for me to know where the received message ends. My goal is to simply receive signals from D00 to D68. I imagine that the received string should be in the form of: 00 C0 00 02 01 01 00 01 00 00 01 01 [Response Code] [Data] Can someone help point out where I can start looking for why my program is sending 64 instead of 18? I do think I am messing up something simple here, but I'm not sure where to start. EDIT: To clarify the models, I am connecting over Ethernet to an Omron CP1L-M40EDT with CP1W-CIF41 Thank you in advance!
-
Hi all i've been trying to make a simple timer in structured text which is turned on and off by a single input, all instances of flip flops i have found seem to be 2 input. any help or examples would be appreciated example of programs; Pulse signal received, start timer Pulse signal received stop timer
-
Hello all this isnt strictly omron/programmer but has anyone used much in the way of pressure transmitters? we have a wika s-11 pressure transmitter on one of our machines installed roughly 7 months ago where the scaling does not seem to be linear, i only started working here around that time so i dont know how it was installed etc. but its a 0-40 bar 4-20mA transmitter connected to an ad081 4000 resolution connected to a cj2m. so the conversion should be nice and easy 100 raw data = 1 bar however it seems to be scaling logarithmicly to me as we checked with a 2 different guages and when they were at 2 bar the transmitter was showing 137 raw data and at 8 bar it was showing 737 raw data and this seems to keep scaling in this fashion as we get to higher bar. is this a common fault on transmitters? is there anything else that could be causing this? how often would you normally expect a transmitter to last? i checked my scaling FB on another transmitter connected to a compressor and it worked correctly so its not the maths used thanks in advance
-
Hey all, Further to my other post I need to read an analog input flowmeter signal (4-20mA) and scale it to litres per minute flow-rate. Then display on HMI...... Then use a PID control block to control a output water control valve (4-20mA) to a calculated set point (litres per minute) The flowmeter is measuring water flow in a pipe & The control valve is controlling the flow rate in the pipe. The water is then sprayed onto a conveyor belt - measured at a percentage SP depending on the amount of powder product on the conveyor belt (in KG) 1. So inputs to PID is the SP (litres per sec) calculated every few seconds from product weights (kg) in bins. 2. And the PV is the flowmeter reading. 3. Output is the control valve (4-20mA) Does anyone have any tips to do this or some good flow PID and flowmeter example. Your help would be much appreciated. Thanks Richard
-
CJ2M RTD PT100 4-20mA Temperature Measurement and HMI display
Hartech posted a topic in CX-Programmer
Hey, I have a project which one part involves using a RTD PT100 (0-100 Deg.C 4-20mA) connected to a CJ1W AD041 (ATD input card), the PLC is a CJ2M Basically the PLC needs to read the RTD and display the temperature on a Omron HMI (NS10), via Ethernet, Could someone please help me out with a basic example program - to read and convert the RTD - ATD value to store in memory. Your help would be most appreciated. Thanks Richard -
Hello My emulator go to fault state as soon as it goes online and runs (Within a second) and the following error Code 01, (May have been caused by an infinite loop, a complex program, or a higher priority task.) The same logic runs perfectly fine on a colleague's laptop I'm using RS Logix 5000 V30.00 Emulator V30.00.01 Running on Virtual Machine, Windows 7 Host system specs are: 8 GB RAM Core i5 CPU @ 1.80GHz Socket 1 Cores 2 Logical Processor 4 Windows 10 Virtual Machine's specs: 4 GB RAM Number of Processors: 2 Number of Cores per Processor: 2 Kindly suggest a suitable solution, what is the possible cause of this fault. Thank You
-
Dear all, Does anyone have a NTXS verion 1.03? I can only find ver 1.04 in the internet. I am having a trouble while replacing NT3S-ST124B-E. The old one is using RS422 Communication. using a 5 cable in pin 1, 4,5,8, and 9. But it can not communicate after i download the old program I uploaded(firmware ver 1.03) to the new unit (firmware ver 1.04). it keep saying com 1 Communication Error. From the manual NTXS software, I discovered that the communication driver supposed to be downloaded together with the firmware. I used this cable RS-232 connection for programming (upload /download) and it works perfectly fine: db 9 Male (NT3S-ST124B-E) to db 9 female (PC) 2 to 2 3 to 3 5,9 jumper to 5 The program i managed to upload using NTXS 1.04 in Win 7 32 bit and sucessfully download to the new NT3S in Win XP 32 bit (tried so many times but it fails on Win 7 32 bit). The program says that the NT3S is connected to CJ1 PLC. The cable used to connect to the old NT3S is using Pin 1,4,5,8,9 which means it should be RS422 (Xtra Drive). I wanted to try using version 1.03 but I can not find it. Regards, Budianto Scanner NT3S.pzm
-
HI all, I have connected my CJ2M-CPU13 to Advanced HMI software via Hostlink (19200,7,2,E ) . I connected to the serial port in CPU and just used ( didnt write any code or formating). The HMI response is very slow ( almost 2+seconds). I am not sure whats is wrong, Is it because i am using more words? Anybody had this encountered this problem? Appreciate all suggestions and advices.
-
Good day everyone, before I start asking my question, just want to let you all know that my knowledge with PLC is not that good. I'm still learning on how to do it. So currently I'm working on a project that trying to obtain data from Omron PLC. I was told that I can't touch the Omron PLC program or modify it. That Omron PLC is connected in an isolated network within a router. Other than adding Network Card on the device, can I use another PLC (any brands) to get the data from that Omron PLC through the router? The communication protocol using here is Ethernet. Can i just tapped into the network and take the data with that way? Or the other method I'm thinking is that, the Omron PLC will feed the data to a server, can I just obtain that data from server by using OPCUA? I heard there's some PLC that have the OPCUA function, I just make my PLC into the cilent and request the data of that Omron PLC from server through Ethernet. Is this possible? Please let me know whether my method works or not, thanks in advance guys!
-
hi everyone, im new here. I have a question, how to connect PLC Omron to Node-red (for IIoT)? if PLC Siemens, it has Siemens IOT2020 to connect PLC Siemens to Node-red. Do Omron haveit own iot gateway like Siemens?
-
Greetings everyone. I'm new here. Hoping to get help to operate the Omron V400-R2 barcode to the Mitsubishi QJ71C24N so that they can communicate the two devices with the correct method. PLC: Mitsubishi: Q03UDVCPU; barcode: Omron V400-R2; serial communication module: QJ71C24N. I use RS 232 communication cable, I have tried using predefined protocol and non protocol procedures but still can't communicate the two devices. I really appreciate your help.
-
Hi all, I'm looking to try and send data from the SD Card on my OMRON PLC to a flash drive on my Delta HMI - DOP107WV using FTP. So essentially I need to use the HMI as a FTP host. Is this possible? And if not, is there another way of doing this? Thanks, Ibrahim
-
Hi guys, I just starting to use Sysmac Studio. Its a bit confusing as I am currently used to CJ series PLC. Usually, we can use P_1sec, P_0_2s and so on to create a simple clock pulse timer function. However, I couldn't find the command or FB to do that in Sysmac Studio. Anybody could explain on how to do that in Sysmac? Thanks
-
Hi everyone! I have an OPC UA Server running on a PC that I need my CJ2 to communicate with. I'm having a lot of trouble to find how I setup this PLC to work as a OPC UA Client. Does anyone have any idea of how to do it? Thanks in advanced! Best regards, Alex
-
Servo amp R88D-1S wall mount quick disconnect for motors
scotty134 posted a topic in NJ Series / Sysmac Studio
Hello to everyone! Our company is trying to make a quick disconnect for motors that connect tp servo amplifier R88ND-1S. As I know Omron doesn't have any options to do it or make an extension cable. Does anyone tried to cut the cable and make custom connector? If yes, could you share your experience? I'm afraid of having issue with encoder count. Thank you in advance! Scotty. -
CJ2M communication modbus (scu41) with power logic SCADA from Schneider
throneviser posted a topic in CX-Programmer
hello expert i want ask some help So i tried to communicate my Omron PLC (cj2m cpu31) with SCADA from Schneider (power logic) on my omron side the comunnication on PLC already take to communication to NB so i add communication module CJ1W-SCU41-v1 I want asking how to open the communication if i want the scada become a master and my plc become slave i got this from omron website is that program compete for my case? i need configuration for scu41 module also to communicate or if you have suggestion i really open i just need to open port RS232c from scu41 so scada can read the data from my plc tahnkyou for your help MRTU_CPU_Slave.zip -
Ok so I recently got the Factory i/o software to practice plc programming more in depth. I got it working easily enough with the siemens TIA software and I am now trying to get it to work with the Omron Sysmac Studio software. I am not sure if it is possible or not. I have access to the hardware but I was really hoping to use the simulation like I can in TIA. Any insight would be appreciated on the subject.
-
Hello, I've been using a Beckhoff PLC and TwinCAT3 lately and I'm learning how it all works. Currently I'm using a ton timer in my program and I've noticed some weird behaviour. The timer.IN is set to true and afterwards I check for timer.Q in an IF statement. That statement should therefore only be true after the timer.PT delay value. However, the first time after I activate the configuration and timer.IN is set to true, timer.Q is immediately set to true for a very short amount of time. When I reset all values and try again without reactivating the configuration, this doesn't happen. I'm thinking that I don't initialse the timer in the correct way or something along those line. I have attached a code snippet. The problem I'm encountering is that the first time after I have activated the configuration and the tonTimeout.In is true. The following IF statement is also true without having run for the delay time. This sends my program to an error state. However, after resetting the values this doesnt happen anymore. Can anyone help me with this matter?
-
My timer can run when i simulate on work online simulator pic
-
Hello People!.... I would like send command to start/stop printer on modbus... the printer is already connected to plc and receive number to print on wood sheet... after research i'm not find any example to send this command.... i join picture with command to send... you can make a example for i test it ?? ;) thanks you ScreenShoot Markem Imaje Command
-
Hi all is it possible to use the internal date of a plc in a function block without setting it as an input for the function block? for instance i have some logic to do something inbetween lets say 10:00 and 16:00 o'clock am i able to use those internals bits of the plc where the time is stored without inputting them to the function block and using them internally? thanks
-
Hello. I'm currently working on a LD-105CT. Is it possible to change the location of the goal, when the robot failed going the specific goal? And is it possible to perform a new task when the robot received an error message/failed going to the goal? Ex: Pick up cart at location A, drives to location B(Location already has a cart in place) and then change goal to location C(which is available) and then release the cart at location C?
-
HI all, Is there anything issue or wrong in thing connection ( added noise filter & fuse. )?
