Search the Community

Showing results for tags 'nt-series support tool'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 114 results

  1. Hi All, I need to start PLC Data Logging using an SD card in the CPU module for an iQ-R PLC.  I have not attempted this kind of logging before and I was wondering about any restrictions on the type of SD cards that can be used. The documentation I have found says "SD/SDHC memory card: 32Gb maximum". Does anyone know why can't I use a 64 GB SD card ? (maybe due to addressing limitations?) Also, when I look for SD cards, I see different speeds of data transfer such as 120 MB/s or 100 MB/s and I was wondering if there is any difference as far as the logging is concerned.  Does anyone know if there are any other restrictions, brands that don't work? Useful tips? Cheers    

  2. Q-Series - Operation Error 4100

    d4rkm4n posted a topic in Mitsubishi

    Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check?   This ladder is pop up when I clicked, error jump.   Thanks.

  3. R60DA8-G & R60DAI8 ISSUES

    FRANK RUIZ posted a topic in Mitsubishi

    Hello all, We’ve been having some issues with Analogue Output cards (R60DA8-G and R60DAI8) on some projects we’ve been doing and wondered if you could help.   On one site where we are using the R60DAI8 we have the following issues: when a valve is failing on site (wired to the first analogue output channel) the ERR LED comes on for the disconnection detection error, should this error come on with a valve failure/instrument failure or should this be for physical disconnection only? Also, site are reporting that the other valves analogue outputs on the card stop working when this happens. We have had a response previously from Mitsubishi support suggesting that this shouldn’t happen (basically they pointed to noise), could be wiring or it could be caused by external noise. Would replacing the R60DAI8 with an R60DA8-G resolve this issue?   General issue for both R60DAI8 and R60A8-G: When the Disconnection Detection Error is no longer present the ERR LED is still on so we have had to issue a reset to the “Error clear request” bit of the card (YF) to clear the error (currently a manual action from the HMI). Is there a way that this can auto clear when the detection error is no longer active? The only other way we can see to make this clear automatically is if the card has an error we could periodically issue the “Error clear request”, is there any issue with doing this if there’s no way to set the card to auto reset? The R60DA8-G has a detection auto-clear enable/disable setting but only has 100 times and from the manual this suggests a 100ms period between resets, so does that mean it only checks to auto-clear for 10 seconds the ERR LED is on and requires the “Error clear request”?   Any help with this matter would be much appreciated.

  4. PT property NB series

    diraemon posted a topic in Other Omron Software

    hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
  5. hello, anyone. I want to ask about file which is I cant open. I was uploding HMI NB series but the file is only .pkg and when I decompile, it cant be done/ failed.. can anybody help me and explaine how is it can be? I use NB3Q-TW01B. thank you.

  6. Series Six PLC Expanded I/O addressing

    Automation_Guy2 posted a topic in GE

    I have a program to convert from Series Six to RX3i and the series six is using expanded addressing. I need help to convert this to standard addressing. I found a manual for this but I still can't figure it out. For example I have  addresses  I1+0201    I1+0203    I1+0205    I1+0206    I1+0207 and need to represent them in RX3i. I attached the 3 page "manual" on extended I/O for reference.   Thank you in advance for looking at this Series 6 Expanded IO Addressing.pdf
  7. which programming cable use for Mitsubishi Nexgenie 1000 Series (NG16DN)  PLC ? PLC has 9 Pin D Male Connection.
  8. Hello, I am trying to create a project in GX Works 3 with a R02 CPU, but in the "New" Tab "Change Module" Tab this CPU doesn't show. However, if i gow to Module Configuration i can select and drag the R02 CPU, but i can't define it as the CPU of the system. Another problem i have is that i need to migrate a A1SH CPU project to an R02 CPU project. From my understanding the software tool for A1SH is GX Developer and for R02 CPU is GX Works 3. Is there a way to convert the project or i need to do a new one and adapt it? Thank you.  

  9. CCM card in series six rack

    alw_off posted a topic in GE

    I finally got my LM6PC software to communicate with my series six CCM 2 card. The CCM2 has 2 ports. I am trying to use both ports at the same time but when i go online with my lm6pc software it kicks my nematron HMI offline. I believe both ports are independent so i am not sure why the HMI is getting kicked off. I have another CCM card and would be open to having 2 CCM cards in my rack but when i tried this both cards failed (bottom LED in OFF state). FYI - running Win 10 with DosBox 0.74 using docking station com1. Fought this thing for 2 days until i realized i was using the wrong CPU ID.  Project background - replacing series six and genius blocks with RX3i and EP IO. Trying to reverse engineer nematron HMI and wanted to be able to view data tables while surfing the HMI to map out the IO addresses. Thanks for any help. Steve

  10. String Compare Issues

    WattUp posted a topic in Mitsubishi

    I am trying to set up a string compare [ $= "Text" D### ] . But it's not passing when it should. So i tried pushing the string to a place holder register [ $= D###1 D##2 ], but its still not matching, but when i just do a double compare [ d= D##1 D##2 ] it passes.    How is my string failing but the numbers obviously match?    Struggling to get picture to attach. Please see here for example.  https://imgur.com/a/w1ckk64  
  11. Hi all, I'm new to Allen Bradley but have some experience with TIA/STEP 7 - not that it relates to this issue! We have 2 side by side systems but running a SLC 5/05 CPU, with the same program but different IP addresses, connected via a network switch. All has been fine until both were power cycled - system 1 CPU program has dropped but not system 2? The IP address for system 1 has been reset and can't be pinged from either the switch (but 2 can) or directly connected to the PLC port. Steps I have carried out as below, so would appreciate anyone skimming over and pointing out where I've gone wrong/something else to try; - Used BOOT P DHCP tool directly connected to system 1 plc, add relation assign original IP address, click Disable BOOT P. - Attempt to ping (after changing laptop IP to same loop but different node) = no connection - same cable used to connect to switch and ping system 2 which worked so cable and adaptor settings good. -not going to help with the immediate problem but battery swapped out for new on CPU. Any assistance and advice appreciated!
  12. I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
  13. I have been trying to connect to my nt21 hmi and I keep getting timeout error. I am able to connect to the plc with the same driver. So I know my cable is connected fine. I set the settings of the driver to match the hmi settings and still times out. Can someone please share the steps to take to send an application to this hmi?
  14. View File GE SRTP Ethernet Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software

  15. Version 1.4.1

    10 downloads

    ASComm IoT for .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 8.0, 7.0, 6.0, 5.0 & .NET Core 3.1+ targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications

  16. NT Support Tool Ver 4.87

    Vinicius Santos posted a topic in Other Omron Software

    Hi guys, I need to upload an NT31-123B-EV3 IHM (System Ver 4.2), but the software I have installed is NT Support Tool Ver 4.87, does not include the PT model I need (System Ver 4.2), has only NT31-V2 / V3 (System Ver 3.1 / 4.1). Does anyone have a solution to this problem? obs: * HMI:         NT31-ST123B-EV3 (System Ver. 4.2)         * Software: NT Support Tool Ver 4.87 Best Regards,

  17. Logicmaster 6 Keyboard Translator Chart

    Darren T posted a topic in GE

    Hi, I was wondering if anybody could post a photo of the Logicmaster 6 IBM PC keyboard translator chart? This is a 'tear out' page from an appendix in the Logicmaster 6 programming manual. The 'Logicmaster 6 Programming and Documentation Software User Guide' Appendix C refers to this chart as follows: "This appendix contains a keyboard translator chart to use with the IBM-PC, PC-XT, PC-AT, or IBM-compatible personal computer. The chart has been printed in triplicate to provide you with extra copies. The sheet has also been formatted so that you can remove each copy of the chart from the manual for easier reference." All the hard copy manuals I can find have this keyboard chart removed and online pdf copies do not show this page. your help would be appreciated.

  18. NT Support Tool 4.87E

    photovoltaic posted a file in Omron

    Version 4.87

    698 downloads

    NT Support Tool 4.87E The registry fix included needs to be manually executed and will add Omron PT models with system versions 3.2/4.2

  19. [Omron] - NT Support Tool 4.87E

    photovoltaic posted a topic in Download Comments

    NT Support Tool 4.87E View File NT Support Tool 4.87E The registry fix included needs to be manually executed and will add Omron PT models with system versions 3.2/4.2 Submitter photovoltaic Submitted 10/14/22 Category Omron

  20. Version 1.0.0

    29 downloads

    An example on ST is the definition of the fronts of a discrete signal.
  21. Function block on ST for algorithm DIFU DIFD View File An example on ST is the definition of the fronts of a discrete signal. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code

  22. valve_control

    drYurban posted a file in PLC Sample Code

    Version 1.0.0

    51 downloads

    A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization.
  23. valve_control View File A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  24. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?

  25. Printinting from Mitsubishi HMI

    Ravi thakur posted a topic in Mitsubishi

    Hello everyone I have Mitsubishi HMI GS2110 WTBD- N. It is connected with FX5U with Ethernet protocol. I want to run a printer directly from HMI with RS 232 without using RS232 adapter card. Can someone please help me what to do and how to do. Regards