Search the Community

Showing results for tags 'nt-series support tool'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 84 results

  1. Hello Mrplc's members I have a Korean version " goldsec Moj2" of Mitsubishi plc A0j2 I need to know the right software for it And how to get it I tried GX Developer but it didn't work because it have only A0J2h type And I tried melsec medoc (version 1.64) but it didn't have A series CPUs
  2. Custom-made tool kits offered by Henchman Products allow maximum convenience and flexibility in performing various critical tasks by technicians. Recently, Henchman Products has been selected as an official partner by the world’s most renowned brand for rugged devices-Durabook. Visit - https://justpaste.it/How-to-Order-Custom-made-Tool-Ki
  3. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
  4. Hello all, I need to read device memory mostly I need to read R registers from PLC L26. I read device data, but inside of table, I can't find R or ZR registers. Can you help me?  What I did wrong?   BR KS  
  5. password unlock tool

     hi everyone i m traying to   write to plc  a program and getting this message then program is not downloading to plc   'there is a device in the program (main) that is outside of the range  check the program and currect the device that outside of the  range ' I m using mitsubishi fx3ga-60mt  plc. please suggest me about it .                              thank you     hello everyone please let me know about  how to make software  tool for password read from Mitsubishi,delta, omron, siemens plc .                             thank you       
  6. Alarm Comments Not Showing on GOT

    Hello! Im trying to set up Alarms on my project using GT Desisgner 3. My GOT is a GS Series, and my PLC is a FX5U. I usually just do a multi state lamp with descriptions for what's happening on the machine, but this system is much more complicated, so id like to do an alarm screen. I found a few sample projects, as well as tried both the Simple and User alarm tools on my own. However once everything is set up, when an alarm is triggered, the comment for that alarm is missing... The alarm time of occurrence, as well as turning green when its resolved all works on the screen, but i cant figure out why my comment doesn't show up. When in my project, all the "previews" of my comments show up great and are all there, just not on the screen itself...   Any help would be greatly appreciated! Thanks!
  7. Hello All,   Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q.  Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site.   Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network?   Thank you.
  8. Hi Everyone, I've had V32 installed for at least a year but haven't had much need for it until this month. I installed a new activation on Friday that I thought crashed V32, which was weird because all the other Studio versions were working. Any time I tried to open an existing project or even create a new one, I would get an "access violation was generated" fatal error. I reached out to a colleague who found a tech note on the problem. Turns out the activation had nothing to do with the crash but rather, turning on the bookmark tool bar caused it. If you have the bookmarks toolbar turned on in version 32  the Windows desktop needs to be set at 100% magnification, not 125% which is the Windows default. Right clicking on the desktop, picking display settings and changing the scale and layout to 100%, then rebooting the computer fixed it. But now all the Windows icons are really small. I've been spending most of my time in V21 through V28 until recently. Since we're all likely going to be seeing more V32 in the near future, I'd thought I'd pass this on.  
  9. Hi Everyone,   I have  NT31C-ST142-V2 and it has a prompt of "System Program not exist or incorrect." I am trying to transfer via NT Series System Installer but I am getting a time-out error. I have Xm2S-09 serial cable with ATEN serial-to-USB cable.I know it is not broken since I can still Upload/download on a CJ2 PLC. I just want to know what other things I can do upload a systemprogram. I have seen a comment on this site that he remove the battery then tried to upload again.   NT is almost 15 years old. I have a back-up program.   I can't seem to upload by this time for pictures of theH MI and the screenshots of software .
  10. I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
  11. I have an issue with a servo drive MR-J4-70A from Mitsubishi, the thing is that it was running okay, but after a shut down it started to display an error and stop, the error displays is "AL 30.1", I reset it but it display the error y stop again, so in this case I would like to know what could be the problem. thank you in advance.
  12. melsec medoc error

    Hi Mr.PLC Members, I have Mitsubishi FX16MT unit, I'm trying to transfer programs to it using melsec medoc version 1.64b but I can't  I'm receiving error "no reply from PLC system",I'm using 25 pin to 9 pin cable and I tried also to connect it with usb to serial cable but the same error appeared  my setup: PLC system        FX Bit rate                 300 word length          7 parity                    Even stopbits                 2 "windows XP" Attached are photo of my unit with my cables and the error of the program  
  13. The CC-Link system on a machine has been intermittently dropping out.  Normally the Link Scan Time runs at a solid 87ms.  When the system "drops out", the link scan time will increase.  Sometimes double, triple, or go up 10x. It happens when the machine is running or when it sits idle. There are 33 stations on the network.  The same stations do not always fault but sometimes all of the stations will fault at once (as seen in the attachment pictures.) We have changed the main QJ61BT11N, the processor, the Q62N power supply, the main backplane (base unit), all cards on the main backplane.  Is it possible for one station or one of the cables to create a network wide problem?  Any ideas thrown at us would be appreciated. 
  14. If it is about changing Gmail ID on phone it is advisable to open the device settings application further at the top the user should click the personal information account then under the “Profile” or “contact info” the user should make the necessary changes. If you are still looking or searching for more information than in that case it is advisable that the user gets connected with the certified Gmail technicians. Lines are open for help and support all the time there is no such issue that cannot be resolved by the Gmail technical team.
  15. Conversion from A to Q

    Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download. So I am stuck now. Can anyone help point me in the right directon? Any Help greatly appreceiated. Thanks in advance.    
  16. stf and stop on at same time

    i have a 800 series vfd drive that when trying to start has the STF function and stop on at the same time, does this sound like a plc issue or a wiring issue?
  17. CompactLogix E/IP to Kuka KRC 4

    Hello everyone,   I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?
  18. In order to conduct a change or a reset of the password, the user should follow the given steps- • Open your Google account in order to sign in. • Then under the security section select signing into Google. • Then select a password as you will have to sign in again. • Then in the field enter your new password and then click on “change password” and if you need any sort of further help connect at Gmail Support Number UK 
  19. A1S68DAV parameter

    please can anyone tell me how to set A1S68DAV analog output module parameters , such as voltage output and resolution? or is the parameter can't be set at aLL (ie, fixed at -10V to 10V)?
  20. Hi everyone; I want to communication Omron NB series HMI with Allen Bradley Micro 830 PLC. I don't know is it possible. İf its that possible, help me please..
  21. Why am I receiving a Gmail verification code without requesting for it? There can be multiple reasons for you receiving a verification code without requesting for it there is a possibility that someone who knows your Gmail ID is trying to get an access to your Gmail account or if you are trying to log in your account with a new or an unauthorized access, Google will always send you a verification code if you will open your account on a device on which you have never opened it before you will also receive verification code whenever you will enable 2 step verification for your Gmail account.
  22. hello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
  23. Geo1000

    Hello all, I have a problem with PLC at work. I am working on historical code with a view to upgrading it for a roll out program to all site based PLCs. The code is to be downloaded using memory cassettes, and there is data on the PLC's which needs to be retained. I have re-worked the code and it performs as I would expect as per the following: 1) I download original code (V2.01) to PLC using CX1 2) The PLC simulates a cycle and various values are stored (the key variables are Installation Date and Service Due date). 3) I then download my code to the PLC and the variables have been retained. All so good so far.   The problem is that the factory production line uses PLC code saved using the PLC Backup Tool. When I download the original code to the PLC using this tool, I encounter various issues, but the main one is to do with real time PLC clock values. When I download the code direct from CX one developer,  I use the MOVD(083) instruction on A352 through four to give me a variable with the date, month and year. This morning (29/01/2019) the BCD values read as 41, 1 and 25, which translates to 29 (0010 1001), 1 and 19 (0001 1001). When I download the backed up code using the PLC  Backup tool, the values are totally different. I have run the backup files for both codes through a comparison program and there are no differences between them at all....... Can any one advise if they have experienced this before??   Thanks.
  24. Connected Components Workbench

    First time using Connected Components Workbench and am modifying an existing program,  does anyone know why and how the original IO_EM_DI_ numbers have been changed and not just the alias'. When I right click and select properties for each tag it gives the address and says 'Read only cell' generated by the I/O wiring tool indicating the I/O channel to which the variable is wired' Any help would be great thanks!
  25. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?