Search the Community

Showing results for tags 'hitachi h-702 series mode simulation'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 116 results

  1. 1769-IT6

    Hi all. I have a 1769-IT6 thermocouple/mv input module. It is connected to a micrologix 1500 unit. The green okay light illuminates on power up, but after you download the program and put it in run mode the processor faults. Terminal block with the cjc's are on the unit. The error message just says the I/O module has encountered an error. The hex code under status bit 6 is 179h. This error code is not in the manual. Has anyone else encountered this? Oh and I only have channel 0 enabled for type k thermocouple. Has anyone else had this issue, or know if it is a configuration issue. Any help would be appreciated. Thank you. 
  2. View File GE SRTP Ethernet Driver for .NET 6, .NET 5 & .NET Core. - ASComm IoT ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Submitter Automated Solutions Submitted 12/05/22 Category Demo Software
  3. Version 1.3.2

    1 download

    ASComm IoT for .NET 6.0, .NET 5.0 & .NET Core developers. Class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE/Emerson SRTP PLCs and compatible devices via Ethernet.   Does not require OPC. Does not require 3rd party drivers Visual Studio.NET 2017, 2019 and 2022 compatible All .NET 6.0, .NET 5.0 & .NET Core targets are supported, including Web, Windows, console, and service apps. Runs on Windows, Linux, Android and iOS Extremely high performance - 5~10 mSec typical transaction time Supports PACSystems family native tag names Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications
  4. Logicmaster 6 Keyboard Translator Chart

    Hi, I was wondering if anybody could post a photo of the Logicmaster 6 IBM PC keyboard translator chart? This is a 'tear out' page from an appendix in the Logicmaster 6 programming manual. The 'Logicmaster 6 Programming and Documentation Software User Guide' Appendix C refers to this chart as follows: "This appendix contains a keyboard translator chart to use with the IBM-PC, PC-XT, PC-AT, or IBM-compatible personal computer. The chart has been printed in triplicate to provide you with extra copies. The sheet has also been formatted so that you can remove each copy of the chart from the manual for easier reference." All the hard copy manuals I can find have this keyboard chart removed and online pdf copies do not show this page. your help would be appreciated.
  5. Version 1.0.0

    8 downloads

    An example on ST is the definition of the fronts of a discrete signal.
  6. Function block on ST for algorithm DIFU DIFD View File An example on ST is the definition of the fronts of a discrete signal. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  7. valve_control

    Version 1.0.0

    11 downloads

    A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization.
  8. valve_control View File A working example of an FB to control a valve from an HMI panel. Controls closing/opening times, plus a little visualization. Submitter drYurban Submitted 10/05/22 Category PLC Sample Code
  9. I'm editing a dual language project for an NA5 HMI. It's working fine except for the message at startup. To modify the project I've had to update the firmware on the HMI. I'm using Sysmac Studio 1.15. Startup language seems to be set correctly. Any ideas?
  10. Printinting from Mitsubishi HMI

    Hello everyone I have Mitsubishi HMI GS2110 WTBD- N. It is connected with FX5U with Ethernet protocol. I want to run a printer directly from HMI with RS 232 without using RS232 adapter card. Can someone please help me what to do and how to do. Regards
  11. Hey, does anyone know why the simulation mode is on? how to change it? (LED SIM )
  12. Q-Series - Operation Error 4100

    Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check?   This ladder is pop up when I clicked, error jump.   Thanks.
  13. Hi, So I have a problem, that BootP DHCP server doesn't find my 1734 AENTR series B and so I can't assign IP address to it. Been trying many things. Any advice? I'm new to AB and I guess it may be a really easy thing but so far I didn't find a solution. 
  14. Hitachi H-700 Series

      Welcome, How to program this PLC?  
  15. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  16. Q and iQ-R series

      Hello,  I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable.   I can not see any advantage to switch to iQ-R, but some people want to. So I want to know,       1. will Q be outdated in the near future?       2. will use iQ-R cost much more than Q? including peripheral units.       3. has iQ-R really been widely adopted?       4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous,              is this right? Many thanks in advance. Ting    
  17. I have a huge confusion regarding the retentive timers on FX3GE. According to the programming manual for FX3G(image attached), all retentive timers use the EEPROM. This is very confusing to me because the retentive timers are modifying the measured time constantly in an EEPROM register and EEPROM type of memory is known to be write limited. After a couple of million write cycles the EEPROM registers burnout. I've experienced this myself by constantly using the T250 and after a while it became unusable. The timer stopped counting time after some time. This leads to my decision that retentive timers on FX3GE PLCs are something that should бе used only on rare occasions so as to avoid EEPROM memory burnout. If this is true than the real question comes in: What is an alternative for using retentive timers on FX3GE when you want to measure time between two events. The instruction TTMR for teaching timer is appropriate however this instruction does not exist on FX3G series.  
  18. Salutations! So recently I'm very confused with my CX-Programmer. Everytime I tried to run the Simulator from CX-Programmer, I always got a notice that a certain program called KickEngine.exe is about to Run. I look up for this program and found it inside CX-Simulator folder, so I decide to run it anyway. The problem is the simulator always return the error : "The selected port does not exist". In other words I cannot run the simulation. I understand that the simulator uses ControllerLink comm. between CX-Programmer and CX-Simulator, so I tried to run those two separately and build the connection, but also to no avail. Even so, since CX-Programmer 9.0, I believe there is no need to run the programs separately. Before I had a similar problem where the simulator cannot be run, and the error code is "Failed to Start Ladder Engine". This was solved by removing whole Omron software using CX-Remover, then reinstalling again. However, it doesn't solve the current problem. If possible I don't want to resort to reinstalling the whole OS... T_T Anyone has suggestions or ideas? I had lookup on an older thread and tested the measure taken there, and didn't solve this. Thanks!  
  19. Hi All,  I am trying to limit the number of character for user to key in data edit . However, I put numbers inside it shows me invalid number of character. Anyone know how to solve it ? Note; My variable is in String Type   
  20. Hello, everyone I have to query a SICK distance sensor from an L26CPU via the onboard Ethernet interface. I have created a simple protocol which I start with the function block SP_ECPRTCL. Unfortunately it takes at least 25ms until the next telegram is started. The sensor responds within approx. 1.5ms. Does anyone know whether that works faster or is that a limitation when using the predefined protocols? Sensor manual:  OD5000, 8021391 (sick.com)  (Chapter 7.4) I am grateful for all the hints. Thanks and regards Dave SICK_Protocol.tpc Messaufbau_vTest.gxw
  21. Hello! Is there any possibility to connect a Mitsubishi PLC to a program like Siemens Plant Simulation? With Siemens PLC I can do it through OPC UA protocol, or Shared Memory with SIMIT, or stuff like that. But I would need to do it also with Mitsubishi PLC. Can I use for example OPC Server? I couldn't find out, if Mitsubishi PLC-s have that function built-in. (I have a L02 and a FX3S COU, either of them would be great.) Thank you!
  22. Hi all,   Is it possible to simulate LMC058 PLC with ethernet in soMachine software. I want to test the logic written in PLC which uses tcpudp library.
  23. I have an analog output card 1734-OE2V and there is in the fault/actions page parameters for program mode. What is program mode and when it is activated? Fault mode is clear but... Program should be written the value, but when this happens?
  24. Hello Mrplc's members I have a Korean version " goldsec Moj2" of Mitsubishi plc A0j2 I need to know the right software for it And how to get it I tried GX Developer but it didn't work because it have only A0J2h type And I tried melsec medoc (version 1.64) but it didn't have A series CPUs
  25. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.