Search the Community

Showing results for tags 'error reading data'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 252 results

  1. MELSEC Q2A PLC

    Donne posted a topic in Mitsubishi

    Hi to all, i have melsec plc Q2A CPU error. i did plc diagnostics with the software and realise this error code 2300 and 2401. i reloaded the programme and tried to reset the plc but error still exist Please kindly help.
  2. Gents, i'am getting error code 8 when i try to read from another plc . Both are siemens im151-8 plc's. I hope anyone can help.   Regards, Mucho

  3. Connecting Siemens S7-1200 to WMS

    JBird1229 posted a topic in Siemens

    I am curious as to how I can connect my Siemens PLC to a Warehouse Management System.    We will be scanning totes, from there taking the tote number and sending that to the WMS.  Then the WMS will send me back the desired lane number.   I don't know where to start on this task. Please help.    Thanks

  4. PLC RESPONSE ERROR

    Santhosh posted a topic in Omron

    Hai, I have downloaded the program into the PLC, downloaded the program into the HMI VIA ethernet.When I turn on the HMI it's showing "PLC RESPONSE ERROR". I can write command to plc through HMI, But I can't read the signal from PLC, Does anyone know the meaning of this message or what I might be doing wrong or missing out?...CPU used:CP1L-EM40DT1-D, HMI used :NB7W-TW01B...PLC to HMI communication via ethernet... 
  5. Hi, I am using syswin and i am doing an exercise on saving and moving data. My challenge is am monitoring temperature from a sensor and the range is -20'C to 100'C from the 4-20mA sensor, after conversion and testing for positive and negative the values are stored in D205. (I have done the conversion and testing for positive and negative values only assigning of bit 15 in D205 is left) The simple program has to turn on Bit 15 if the value is supposed to be negative. 1000 0000 0000 0001, a simple approach to telling us this is -1’C.  0000 0000 0000 0001, is telling us this is 1’C. Bit 15 is going to be our Sign Flag, so we have to ensure that if the temperature is positive then  Bit 15 = 0, how can we do this make Bit 15 of D205 = 0? If the temperature is negative then  Bit 15 = 1, how can we do this make Bit 15 of D205 = 1? How can i turn on this bit inside a data word? for negative i thought i could just add #8000 to the values after conversion then storing in D205 but for positive values how do i ensure that bit 15 is 0? How could you approach this? Am a bit stuck, all thoughts and ideas are much appreciated if possible you could add a snapshot from syswin or cx-programmer. I have attached the WTANK.SWP file which can be opened in syswin or cx-programmer. Look in block Main 8 Temp Buffer, Network 3 Convert to 'C WTANK.SWP

  6. fx2nc

    Augie posted a topic in Mitsubishi

    Hi, What is the problem when error led lit for fx2nc  mitsubishi plc  
  7. Hello I tried to go online with MicroLogix 1200 through "1761-CBL-PM02 Series C" serial cable. I read its manual and it says i can use the cable to go online. I got these errors and i attached them. Can someone tell me why i am getting this error? Thanks for reading and have a good day !

  8. Error on Mitsubishi Servo Pak

    Tony P posted a topic in Mitsubishi

    I have a Mitsubishi servo Pak #MR-J3-40B with an error 25 and 95 flashing. Could not find any help on the web or in the manual. Any help appreciated.

  9. software question

    hffhghgtr posted a topic in General Topics - The Lounge

    Which type of software is used for data matching in excel sheet.
  10.  hello there ! all the variables are reals ... can anyone explain why i get a different result when i calculate c2 first ??? the two programs shown in the pictures are exactly the same ... the only difference is the posistion of c1 and c2 . please help me . It's not a logic  attitude in programming ..... Any ideas? Thank you
  11. I have an application I am currently working on where I have a single AB ControlLogix PLC that needs to read data from 12+ Omron CJ2M PLCs.  The Omron PLCs don't need to read any data from the AB.   I have tried several things including the generic .eds file from Omron and the instructions in the document I found on this site:  Omron CJ2 to Rockwell ControlLogix Ethernet/IP Datalink.  The generic .eds file gave me a D6 error on the Omron side and after talking to support it does not seem like the correct path.   When I tried following the instructions for the datalink I ran into several issues.  The first issue was that after configuring my network in the Omron software upon trying to load it I got a unit mismatch message for the 1756-EN2T, the .eds file I have is for a 1765-EN2T but the card shows as a 1756-EN2T/D, so I am concerned that could cause an issue...that being said I can't find any .eds file specifically for the /D revision.  The next thing I noticed was that there doesn't seem to be be a way to link the produced data from the Omron to the AB, the Omron configuration software with the AB .eds files loaded only gave me the option to send data to the Omron which we do not need to do.  I created a generic Ethernet module in my RSLogix program for the Omron PLC and then created a consumed tag and linked that to the module but I do not see where I set up the link on the Omron side for that, so how does it know what addresses to read?? Any help would be greatly appreciated!!!! Thank you!

  12. PLC setup error location

    badlishah posted a topic in CX-Programmer

    Dear sir, how to solve this problems non fatal error 9b, Omron cpu44 c200hx

  13. IFIX Scada communication issues

    krysmberg posted a topic in GE

    I am new to ifix, I am having an issue, I am unable to receive any information, after attempting to fix the fact that the view was only pulling half the data I lost it all, I had a back up saved, but it didn't work on restoring communication, I was getting a cannot connect to node error, but I have fixed that, now all I am getting is question marks. essentially I believe that I have two standalone computers with the ifix software and the communicate directly with various plcs that share information across, either a ring topology or full connected. so the computer I have that is working is setup with scada and the database and MB1 with no network support, the one that is not working is set up the same, my cable connection is a usb to Ethernet and im communicating with a Comm port on the computer. I've tried different comm ports, even contacted GE, they were suppose to have someone call me back but no one has yet. Can anyone give me an idea of what I've got wrong here?

  14. ES:01802015

    simonongsk posted a topic in Mitsubishi

    Hi:           I am new to Mitsubishi, I have a FX3U-80M with I/O expansion, I am using GX Work 2 Structured Ladder and tried to download the plc program but failed with this error message "Upload or Download is not possible when Data exceeds capacity of the memory cassette, Check the memory capacity setting in the plc parameters"   At the moment the memory capacity set is 16000.   Can some help?   Thanks

  15. GE PACSystems Ehthernet Interface Error

    Chris Iwo posted a topic in GE

    Hi ALL, In the Rx3i controller fault table-the following fault keeps coming-up "0.4-LAN System-software fault: resuming" Error Code: 402 Group: 16 Action: 2 Diagnostic Task Num: 6 28001d001400000004011d000000000c0a88066 Does anyone have the definition of this error code and how I can interpret the error? Thanks Chris Ok Tedi PNG

  16. HOSTLINK Problem

    initial posted a topic in CX-Programmer

     I  am doing  a data collection from  OMRON PLC CP1L through MS excel VBA  use API function. The connection was setuped correct (I think)both in PLC and PC side. The trick things is   when PLC have USB cable connected  the data  was send to PLC and can get feedback through RS232 in normal.(I use portmon moniter the progress,and I can see the data (C-command ).But when I get the USB cable removed  ,The PLC can not get any reponse back.Dose any of you have met that  before?
  17. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  18. Excel Add-in for Modbus/TCP Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    426 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 (version 16) spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Modbus/TCP and Modbus RTU/ASCII communications. No OPC, DDE, external drivers, or programming required
  19. View File Excel Add-in for Modbus/TCP Data Logging 3.6.8 ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Modbus/TCP and Modbus RTU/ASCII communications. No OPC, DDE, external drivers, or programming required Submitter Automated Solutions Submitted 03/01/16 Category Demo Software

  20. Excel Add-in for GE & Emerson PLC Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    84 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for GE / Emerson PACSystems (RXi, RX3i, RX7i), Series 90 (90-30), and VersaMax communications. No OPC, DDE, external drivers, or programming required.

  21. Excel Add-in for Allen-Bradley Data Logging

    Automated Solutions posted a file in Demo Software

    Version 3.11.2.0

    518 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2021 (version 16) spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.  
  22. View File Excel Add-in for Allen-Bradley Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Allen-Bradley ControlLogix, CompactLogix, MicroLogix, Micro800, PLC5, and SLC500 communications. No OPC, DDE, external drivers, or programming required.   Submitter Automated Solutions Submitted 03/01/16 Category Demo Software

  23. IFIX Problem

    N_Locus posted a topic in GE

    I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks
  24. Hi, I work as an industrial programmer primarily dealing with Allen Bradley, Mitsubishi, and Omron PLC's as well as various peripheral devices. I would like to begin the process of learning computer programming as it pertains to the manufacturing industry. I'd like to learn how to write databases (SQL, etc) and VB apps and eventually I'd like to be able to write applications that can communicate with PLC's and other devices (although the last one would be a ways down the road).  I have very little experience with computer programming so I don't really know where to start. What language should I learn first? What free software is available to learn with? What resources do you recommend I use? I've downloaded Visual Basic Express and found some introductory courses online that I've just started but if there is something else I should've started with I'm open to suggestions. Thanks

  25. Error code: 4140

    jydepower posted a topic in Mitsubishi

    Hallo. Recently ive got an error i haven't seen before. Error 4140 im using GX IEC developer  CPU is Q06UDEH I cannot figure out why the error happens.  When show the location to the step where the error occurs it makes no sense. The specific area has only got simple bool operations. When trying to recompile the entire project. The error "moved" to another location in the program. At this step there was a lot of float operations. When monitoring one of the variable value was NAN. I could not find anything about NAN in the manuals. But google stated it could mean not a number, which makes sense when reading the error description. I know it impossible to help me with my specific problem, when i cant really tell where or why the problem happens. But im pretty sure it has to do with me using float operations wrong. Ive tried to do a simple test program just to see if i could provoke the error, but no luck. How can i make a number go out of range, make it unnormal, nonnumeric or even infinite? Maybe someone could give me a simple example how to provoke this error, which might help me on my search in my own program. Thanks. Below is a screen-dump from the manual on this error.