Search the Community
Showing results for tags 'cp1l-el and cp1w-cif01'.
Found 92 results
-
Hi, I can't add this CP1W AD041 analog module to mi PLC CP1H
-
Hi, I am planning to use an encoder on a CP1L to read on the RPM of a spinning wheel. For this, I can use high-speed counter 0, and the PRV2 instruction. My problem is that I also need the rotation direction. I was wondering if anybody had a tip for this? Thanks
-
Using Omron CP1L-EL with tcp/ip connection to printer device. im want to use signal for communication establish. its available for omron plc. already test A313.00 and A315.10 but not work. im using TCP-IP Active open port.
-
Hi, I have (tried) to connect 3x NB5Q-TW00B on a CP1L-M60DR-A plc but cannot get it to work. It seems that there is no possibility to connect multiple NB's to one plc. However, the NB-Designer software allows me to connect multiple HMI's on one plc? Any ideas on how to get this to work? Kind regards, Rob
-
Hi every one, i'm new! I have a GSM modem: "F2013 GPRS IP Modem" (attach manual), one PLC CP1L-EM30DR-D and one CP1W-CIF01 RS-232C option boards (mount on PLC) So now, i want to connect them and send sms to mobile phone. I already read some topic in this forum regarding to this PLC RS232 port but still cant get the ideas when to create the ladder program. E.G: i want to send string "ABCDEF" to mobile phone when system has problem, what should i do?, how can i do that with ladder program in cx-programer? How to input to trigger the GSM send text msg: AT+CMGS=" YOUR PHONE NUMBER" and after that input to trigger GSM send text msg: YOUR TEXT MSG CONTAINS (Ctrl+z to send)? Can anyone give me a guide/Sample code? Plesea support me, thanks a lot. F2X03 Series IP MODEM USER MANUAL.pdf
-
Hello, I have received one CP1L PLC CPU for troubleshooting. It is password protected. Is there any way to solve it and backup the program? if no, is there any way to reset everything.?Regards,
-
Hi everyone! I have a PLC CP1L-EM30DR-D, once board RS485 CP1W-CIF11 for PLC and Sengenuity sensor Sengenuity sensor support RS485 via Modbus RTU. So i want to connect them, but i dont know how to do it Can anyone tell me what should i do?? Thank a lot!
-
Hi, I am trying to connect a CP1L-E to a NB7W-TW01B via a 5 port Ethernet switch. I have communication from the laptop to the PLC and from the Laptop to the HMI. but it seems like the HMI and PLC aren't communicating with each other. The HMI will not control the PLC. I've tried everything I know to do with the communication settings and it still will not work. If anyone has any suggestions they would be much appreciated! thanks
-
Hi, i am start a aplication whith modbus for a simple comunication(read/write), some analogic imputs and outputs, whith, AB Micrologix 1500 LSP (1 com port Rs232) and whith a Omron PLC CP1L-L + CIF01 (rs232). I using CP1L like a master, but i try a lot of time and no read/ Write happens, just the recognition of Node (1) and the error code 88, no mather whith Function code i use. I use Modscan32 whith Micrologix 1500 and works fine, com settings are right to, i try 38k, 19,2k, and now 9,2k None stop bit 1, setting on CP1L are in serial Gateway. If i take the cable the reponse memory go to zero, so the communication is happen, just dont in right way. Is possible to use, RS232 whith CP1L, for Modbus communication right ? I already see PCMR code for modbus, but is to complex, for my aplication. No ofense. Someone can help me?
-
hi everybody i have a network with 2 pieces cj1m and 2 pieces cp1l communicating with a ns15 monitor. everything is fine. i need to connect an ixt4a monitor in that network. my question is : do i have to make new routing tables or it is not neccessary? my routing table for cj1m and cp1l cpus are attached. if then i have to make new routing table so that the cj1m will be able to communicate ixt4a monitor, how am i going to do it for both monitors? Any help will be mostly valuable and appreciated. thanks
-
I have a CP1L by Omron and a barcode reader by Honerwell. I want to activate the serial port 1, to connect it with the reader. The reader shoul read one of the 2 main barcodes. If the reader get the barcode 1, then it should read 3 times the barcode A and activate an output; but if it read the barcode 2, it should read 3 times the barcode B, and also activate an output. I want made my programm in ladder programation, How I can activate the serial port 1? How I set the the serial port 1 as an input to the function block RXDU? How works the FB RXDU? How I can set the codes? How I set the fb RXDU as an output?
-
First of all, I'd like to say hello to all of you. This is my first post here. I'm not well experienced in Omron products and I need a little help from you. My client has an old machine with Omron C60H PLC, He asked me the make the backup of the program and put the newer PLC. I'm thinking of using CP1L series (or CJ2 - not sure of it now). The question is, what accesories do I need to connect and upload program from C60H to my PC? I heard that the 3G2a6-LK201 module is adequate. Do I need something else? I'm using CX-programmer. Can I handle uploading program from C60H with this software? Is there a function that converts old program to newer version compatibile with CP1L or CJ2 series, or must it be done manually? If you have any tutorials or tips and tricks about migrating from C60H to newer series of Omron, I would very appreciate it. Thanks in advance, Marcin
-
Hi all: I want to know when the pls2 command has finished to send the pulses. Is there a flag (Axxx.xx) that tells me when it has finished. I had not found any in the manuals I have. Thank you for your help!
-
I am trying to go online, in CXProgrammer, with a CP1L-M60DT1-D PLC. I am connecting with a USB cable (Standard-A on laptop side, standard-B on the PLC side). In my "Change PLC" dialog: Device type is set to CP1L, CPU type set to M. Network type is set to USB. FINS Destination Address Network set to 0, Node set to 0. I get "Failed to connect to the PLC" when trying to go online. Any ideas why? Thank you. (Note; the PLC connection is showing up in my Device Manager, and the correct driver is installed).
-
Hi, In my project, im tring to send a command from the hmi to the plc, truew the cable RS232 using the foloing conections: NT3S PLC 2 -----3 3------2 5------9 _4 |_5 But i dont know how the cp1l will read the comand sent by the HMI, i tried to use the HELP in the CX-PROGRAMMER but i stil didnt understand how they communicate. I already know that they communicate using the memory DM, and that the HMI works with ASCII communicacion.
-
Hello all, I am trying to connect a barcode scanner to my plc using a 232C in the serial1. The scanner is a motorolla ls3578 fz, with the following parameters: Transmit code ID: yes Data Transmission format: Data/suffix Suffix: CR(1013) Baud rate: 9600 Parity: none Hard/software handshacking: none Stop bit select: 1 Ascii format: 8 bit RTS Line state: high Prefix: none In order to send data form the scanner to the plc, I use the RXD function block with the following parameters: First receive word: D300 Control word: 0100(hex) Number of bytes: &10 All the communication settings of the PLC are the same that the scanner ones. PROBLEMS 1)When I scan something the scanner beeps as if a transmission error occurs, and the data is ignored. 2)The A392.14 never comes ON and. POSIBLE SOLUTIONS Type of barcode: Now I am using a Code39 barcode. Is it OK? How can I implement the suffix? I have a software that allows me create new barcodes, but I don’t know what kind of data do I need. With 1234567891013 the 1st problem occurs. With 123456789 nothing happens. Communication settings: maybe my communication settings are not well defined. I attach you the file and maybe someone find out an error. Thank you up front! rxd.cxp
-
Intermitent stop reading due to cable induction in cp1w
sergio garcia posted a topic in CX-Programmer
Im trying to control a baldor VFD trough modbus RTU with cp1h/cp1wcif12 using the solution posted here which for me works really fine but the problem comes when I turn on the motor (500hp 440v), the cable gets induced and adds noise to the communication causing errors when reading. I already try to use shielded cable and it gets better but still causing errors. In the solution posted in the link above shows how to connect the cp1w-cif12 by connecting only SDA- and SDB+. So my question is, should I connect FG to the VFD rs-485 ground as well to reduce that noise? Any suggestions are welcome
