connecting ixt4a to a cj1m/cp1l/ns network

[geomariolis 0]

hi everybody i have a network with 2 pieces cj1m and 2 pieces cp1l communicating with a ns15 monitor. everything is fine. i need to connect an ixt4a monitor in that network. my question is : do i have to make new routing tables or it is not neccessary? my routing table for cj1m and cp1l cpus are attached. if then i have to make new routing table so that the cj1m will be able to communicate ixt4a monitor, how am i going to do it for both monitors? Any help will be mostly valuable and appreciated. thanks

[PdL 66]

You will not need a new routing table but I asume the Beijer HMI will be connecting by FINS so you should set the appropriate network settings in the Beijer HMI including the network number #1 you defined with above routing table.