Search the Community

Showing results for tags 'communication cable'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 161 results

  1. Siprotec Relay 7sj62

    I have 24 Siemens Siprotec relay(7sj62) which i want to communicate with Scadapack 330E (Schneider) on 103 Protocol. but every time I try to communicate it shows Slave device is failed to communicate. trying to communicating via serial (RS-485). What should i do..?? or do i need to communicate it with Siemens PLC..?? If so which PLC should use..??
  2. InTouch Comms

    Hi Everyone, I've just installed InTouch V10 and am trying to develop communication with Emulate5000, for educational purposes. I looked over the internet and found some videos on how to develop communications by setting up the topic name and node name in DA Server manager, but the issue I'm facing is that my SMC only shows logViewer and nothing else (snapshot attached). Am I missing some vital component or dirver? Or is there some problem with my installation? Help would be much appreciated.   P.S: Window Maker and Viewer are working fine. Thanks, Sabih
  3. PC to PLC Kommunikation

    Hello, i want to connect my PC to the PLC(RSLogix5561)  over TCP/IP. In rslinx the Ethernet driver are configured. My PLC IP Adresse is 192.168.1.100 and my PC Adresse is 192.168.1.105. From my PC i can successfully ping the PLC IP Adresse, but from the PLC i can't see my PC. And it does'nt schow in RSlinx. Is there anything i am missing?
  4. Hello there, I am new to OMRON so need some help to communicate two PLC over FINS.   Here are the description of the system... (IO Table image is attached)   PLC1-  CJ2M-CPU33 IP- 10.113.218.34 SUBNET-255.254.0.0 UNIT NO - 00 (set the dial available on the CPU in HEX) NODE - 22 (set the 2 dials available on the CPU in HEX) PLC2-  CJ2M-CPU33 IP- 10.113.218.35 SUBNET-255.254.0.0 UNIT NO - 01 (set the dial available on the CPU in HEX) NODE - 23 (set the 2 dials available on the CPU in HEX)     Now, what i have to do is to transfer the D100 to D110 from PLC1 to PLC2's D200 to D210 and Transfer the D100 to D110 from PLC2 to PLC1's D200 to 210.   I have tried RECV and ECHRD blocks but didn't succeed yet.   Two CPU are connected over ethernet via a industrial switch.   Can you help me to achieve data transmission please...
  5. HMI and PLC Communication problem

    hi there. .. i am new to plc programming.. Right now i am having problem related to communication between hmi and plc.. i have HMI WEintek 6070ip and plc mitsubishi FX2n.. i have written a program in gx developer . and communicate it with EASY Builder for HMI. so for now plc is communicating with my program written for hmi on pc. but when i downlaod to hmi and connect plc cable to hmi then hmi shows no plc communication. i am having a problem for communication between hmi and plc. any help will be a life saver. thanks in advance
  6. Hi everyone! I got this machine with a CP1H PLC and NS8-TV00B-V2 as PT. I was told that they were working fine, but suddenly, It appeared a communication issue: black screen and "connecting..." at right bottom. I dont know if It is a configuration problem or some hardware damage.  These are the configuration in the PT and the PLC. The communication is through RS232 Serial.  I tried to communicate another PT screen with the same communication settings and IT WORKED!. ' I've been thinking that, perhaps, the serial port A is damaged, I have tried to set port b, but I havent could. How can I configurate PORT B??   THANKS...  
  7. Hey all - I am working on a car wash system design that will utilize the Nayax payment system. Has anyone utilized them? How do I incorporate the device with PLC to automate the system. After payment is approved how can I send out that signal from them, all via ethernet on a managed switch w/ wifi for exterior comms for the Nayax.
  8. Hi All, Hope you all doing well in this pandemic life.  I would need your expertise with an issue I have been struggling with for past few days and thought to reach out here. I am working on a migration project with GE PLC and Citect SCADA 7.10. The GE PLC is migrated to ControlLogix L74 Rev24.10 while Citect SCADA is retained. For testing I only have L71 and L82 and could not managed to organise L74. When the code the loaded in L71 and connected to Citect, I cannot see tags in Graphic page but I see the subscription.txt in Debug folder shows all tags good . The same code when loaded in L82, the Citect works instantly.  Does anyone know this behaviour of PLC and SCADA? Regards, DeeEngr    
  9. Fatek PLC Communication Problem

    hy all. i am having an error while communicating with fatek plc. when i communicate it gives an error. " Com port open fail, plz check if this port is used by other programme when we online the PLC (Fatek/ WinProLadder). kindly Guide me   as it looks like port is already used by another program . and i dont know how to kill that program ..       
  10. INFO

    Dear sir, I am working in container terminal, we have Siemens plc  s7-300 , Bromma spreader with SCS-3( codesys software) spreader field device sensor (ifm) connected to slave ifm CR9011, now a days we are facing too much issues in scs-3 so we planned for isolate the SCS-3 but we want to know ifm module Cr9011 how to communicate to Siemens plc  7 how to write in hardware configuration. can you please suggest us.  
  11. Produced and Consumed Tags

    How can I determine if both my Produced and Consumed tags are communicating with each other, and if have the right set of tags since I forgot how I named them?  Is there a way to confirm that both my P & C are communicating.
  12. I have IPC and need to detect status of IPC and PLC communication . I need help with the same that how can in detect it ? Is it possible with message instruction ? if it is then how ?
  13. Can anyone help me with the issue in the picture? We have the correct version in place yet it gives me a version error stating it needs the version that is installed. Doc1.docx
  14. CP1L-EL TCP/IP with VideoJet Printer

    Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
  15. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  16. Hi All, Am trying to communicate and make In-Sight bar code reader to trigger through MicroLogix 1100 with RSLogix 500.  Does any have any info as to the steps to follow. Most of the info I saw and have tried were for SLC processor In fact, I created the String file ST10:0  for the target device as was mentioned in one of the posts but when I complied it there was error saying that St10:0 was not supported by the module. Please see attached file. Any insight will be appreciated  
  17. LOCAL MELSEC COMMAND

    Hi everybody,  Is it possible to send MELSEC commands to oneself, locally, not using the phiysical ports? I would like to use some commands described in the "Communication_Protocol_Reference_Manual_(MELSEC)" to get some self-management functions in my PLC.  For example, in OMRON this is possible using CMND instruction and setting the FINS address to 0.0.0 in the parameters of the instruction. Thank you very much. 
  18. Diagnostic of profinet communication

    Dear Experts, I want a sample block to find out the status of my Profinet cable w.r.t Hardware configuration. whether the cable is connected or disconnected from the node. Either my nodes may be VFD, HMI, SCALANCE, etc...  please share the sample blocks... S/W ===== >Tia portal v14 sp1 update 6  H/W ===== >CPU 1214C DC/DC/RLY hanks in advance
  19. [ASK] Driver for FX3U-USB-BD

    Dear all... I am new here. I have a problem when connect my laptop to new PLC FX3U series. There was sign that I must update a driver for FX3U-USB-BD. Where can I get it for free? Could anyone here help me to share a link please?   thanks! Haniv
  20. DB9 Connector SLC 5/03

    Hi Im hoping someone can help me out! i have a PLC SLC 5/03 and i want to connect the DB9 port with DH485 protocol to a computer 100 fts from there, is there any problem with the distance? and what kind of cable should i use , i already connected with my laptop with a USB-serial with a null modem cable RS232  (i did the cable by my self) but for the distance i cannot keep using that protocol so what is the recommendation?    
  21. Mitsubishi plc communication error

    I have Mitsubishi FX-1N P.l.c i found a problem about communication port.Run and Power L.E.D on as per routeen but i cant communication with GX.Works 2. PLz tel me how can i fixit this problm....
  22. IC220PNS001

    Hello, I currently have two IC220PNS001 connected to IC695PNC001. The PLC being used is IC695CPE330. Out of the two PNS001, one of them has a solid SF Red light on which means bus error according to the Status Parameter IO. I disconnect every single IC220 card connected and downloaded the whole configuration but I still have a Bus error.  PS: I have also tried to switch the PNS001 with the brand new out of the box and I still have the same error. In the manual, it says Profinet Diagnostic available, can somebody please guide me as to where I can find the Profinet Diagnostic, also is there any manual for PNS001 which explains the in-depth debugging process for this PROFINET Controller.  
  23. Diagnostic of profinet communication

    Dear Experts, I want a sample block to find out the status of my Profinet cable w.r.t Hardware configuration. whether the cable is connected or disconnected from the node. Either my nodes may be VFD, HMI, SCALANCE, etc...  please share the sample blocks... S/W ===== >Tia portal v14 sp1 update 6  H/W ===== >CPU 1214C DC/DC/RLY hanks in advance
  24. I am trying to get produced and consumed tags set up between 2 1756 racks with different ip's. The 1st rack has an ip address 172.28.6.3. The 2nd rack has an ip address of 10.81.105.8. Would this be as simple as adding an EN2T card to one of the racks and setting the ip of one onto the same network? Or is there a better way to do this?
  25. Series 90-30 CPU311T With Proficy ME

    We have an old press using a Series 90-30 with a 311 CPU 5 Slot Rack.  I am trying to pull the program off so we can convert it to a new CompactLogix.  I am using Proficy ME v6.0.  I have the proper RS232-485 cable and a built in serial port on my XP laptop but cannot get it to connect.  I know that Logicmaster projects cannot be opened by Proficy ME and being such an old 90-30 it probably was programmed using Logicmaster.  Would being programmed by Logicmaster prevent me from even being able to communicate via serial connection?