Search the Community

Showing results for tags ' big data type apps. one example is available to download here for more info overview of parijat drivers: click here additional supporting info about parijat drivers:click here complete related driver options: click here please contacts us for mor'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 198 results

  1. Siemens IPC477D Touchscreen Driver Needed

    EMD-Godzilla posted a topic in Siemens

    I have reloaded a IPC477D with Windows 7 64-bit and everything is working but since we do not have the original installation disk or ISO, we have no way to load the touchscreen driver. I am looking for any information that would lead me to the OEM for the touchscreen or if anyone has access to the IPC installation DVD, all we need is the touchscreen driver directory which should have both the 32-bit and 64-bit version. Siemens tech support indicated we must repurchase a installation DVD for $350.00 and it would ship from the fatherland and be here in about a week. Thanks in advance.

  2. MBE Driver can't save config file

    horvatmiha posted a topic in GE

    Hello!I am using MBE Driver v7.46b on Windows Server 2012 R2. Problem is that I can't save config file. I can edit Channels, devices and data blocks, I can see incomming values, I save a file without any message. But config file is not saved. In Event viewer I get error as you can see on picture. It says: Error writing to system registry: Driver App 00000001 \Driver defaults. Other error says: Error writing to system registry: ServerMsg 00C54BB8 \Driver defaults.Is it server or driver problem? Please help. At the moment I can't edit anything in driver so I can't configure it to use it with my SCADA iFIX 5.8
  3. Hello! I am beginner in PLC world, also in SIEMENS PLCs. I managed communication over private network. Now I have a problem that I get same values on all inputs. Picture below shows my configuration of driver and data monitor. First picture shows values when input I0.0 is in state 0. Second picture shows values when input I0.0 is in state 1. Physically on PLC only input I0.0 is forced to 1, input I0.1 stays 0. But data monitor shows both inputs as state 1. Where is problem? Is problem in PLC program, TIA portal? I saw some guys using DataBlocks but I am not skilled enough to use it. Third picture shows simple PLC program on my PLC. Please help. Thanks in advance!

  4. S7-1200 with SCADA driver S7A not working

    horvatmiha posted a topic in Siemens

    Hello! I am trying to connect my PLC with SCADA. I am using S7-1200 1212C CPU (RELAY outputs). My SCADA system is iFIX 5.8 with driver S7A. I am trying to establish connection via GPRS router (TCP/IP). Port being used is 102 (default by S7A driver). In my company we have private network, SIM card in GPRS router gets static IP (set by RADIUS server)  which is 10.247.XXX.XXX. My PLC has IP 192.168.0.10 set in Project. I am not sure what am I doing wrong. How to correctly set IP address in PLC to communicate in private network via GPRS router with static IP? I already enabled TCP port 102 in my router but I am not sure to which IP should I enable it because I am not sure if IP address set in PLC is correct. Should I use some communication blocks in program? I also enabled PUT/GET function (see attached pictures). Please help. Thanks in advance! :)  
  5. Lets say I worked in a factory that made multiple models of parts. I need to run data tracing on the off shift due to certain models only running on 2nd and 3rd shift. I want one data trace to capture one group of bits at Model 1, Then reset the Data Points and run again for Model 2, Model 3 and so on. So the Bits that I am mapping with the trace need to change.  I can change the trigger easy enough with my program. I see in the manual the CPU has a "separate memory area" for trace settings. Can this area be accessed from the Program so I can set my bit addresses to monitor to a word or E_?   See attached pic for clarification of what I aim to change through the program.   
  6. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?

  7. PLC download problem

    Luka0204 posted a topic in Mitsubishi

    Hi, when I download on PLC (R04), sometimes for example. TON timer's output .Q is automatically set to true even though input is false (also on .ET time is 4h ...??). Also, sometimes some bool variables are also set to true even though they are not set by any kind of logic. However, when I physical reset the PLC (power cycle), mentioned problems don't exist. Does it mean that software reset isn't working entirely correct and I need to reset physical PLC (power cycle) every time after I download on PLC? Regards Luka

  8. Modbus Addressing in Weintek HMI

    rohandarji posted a topic in HMI & SCADA

    Modbus addressing in Weintek HMI to poll data from Temperature sensor through RS485. In my system i have connected Temperature sensor to I/O Scanner has output in terms of RS-485 which directly connected to COM3 Port pin. No. 6 (as Negative) & 9 (as Positive) of HMI (Model No: MT8071iE) and HMI connected to PC via ETHERNET. I want to read temp on HMI screen via MODBUS protocol. So, can you please provide me instruction about addressing of MODBUS register in Easy-Builder Software so can read data of corresponding register. Because when i do compile i got an error like " Device no Response". I hope i will get reply from your side as Fast as possible to overcome this problem. Thank you.

  9. Cimplicity Auto Report Generation

    MD SULTAN ALAM posted a topic in GE

    Dear All, I am having a problem with my cimplicity Auto Report Generation, When I Click on Generate Report, it shows "0 values collected" does anyone knows what's possibly could gone wrong here ??
  10. hello everybody, can anybody help me? I have PLC= Q03UDVCPU, HMI=  HAKKO-FUJI electric V9100iC, Modbus sielco= SS3018 and thermocouple Type K. I want to making trend in HMI cotinuously with TC type K and modbus SS3018. I attact what connecting I have to do.. but I dont understand what should I insert address in configuration trend on HMI. I've checked address with modbus poll (SS3018 with uport rs485 to TC type K), and I get address number 14 which stored the data result of temperature.. what should I setting for connected the TC to HMI?  
  11. What is the best way to get to the configure screen when the mer file is set to auto run on the hmi. I need to get this file out before this screen finally quits on me. 

  12. Mitsubishi GX Developer

    Zubair Ahmed posted a topic in Mitsubishi

    Hello all ... i am a new plc user.. i am using D500 for taking value as it is a latched register.  i am taking value for a flow meter. i have two questions. 1. how totalizer is calculated from flow rate as my flow rate is in m3/h. 2. the value of register is gone upto 32000 approximately... i want that this value to go on.. i mean how 32 bit register is declared in plc .. a
  13. Please assist me with the following; regarding the ME96SSHA-MB Power meter data transition with Melsec-Q series PLC; We acquire to read various values on dedicated Modbus storage address registers at the simultaneous into a Melsec-Q series PLC via Modbus (TCP or RTU)  for calculation purposes. Naturally, since the reading of these variables are to provide accurate instantaneous results, it is a requirement that these values are to be read at one scan.   However, as can be seen below, there is a gap in address register range – of which, if all of these are scanned simultaneously, yields an exception error when read. This error is only avoided by scanning these data sets separately – which is not ideal for our application – since accuracy in calculations is imperative.
  14. Please assist me with the following; regarding the ME96SSHA-MB Power meter data transition with Melsec-Q series PLC; We acquire to read various values on dedicated Modbus storage address registers at the simultaneous into a Melsec-Q series PLC via Modbus (TCP or RTU)  for calculation purposes. Naturally, since the reading of these variables are to provide accurate instantaneous results, it is a requirement that these values are to be read at one scan.   However, as can be seen below, there is a gap in address register range – of which, if all of these are scanned simultaneously, yields an exception error when read. This error is only avoided by scanning these data sets separately – which is not ideal for our application – since accuracy in calculations is imperative.

  15. Mitsubishi GX Works Bugs??

    STTAndy posted a topic in Mitsubishi

    Hello I have been using GX Works 3 for a while now and I have discovered a couple of things, maybe bugs. I have not had any training for the software or hardware so maybe I did something wrong. 1 Labels. If you sort a global label table into any order other than the unsorted order that appears by default you are unable to create, delete or edit any labels. Our Mitsubishi representative discovered that if you click on the column header between 'Data Type' and 'Class' the order does not change but now editing is available. This, it turns out is a really bad idea. It seems the position the label was in when it was created is preserved, I think this is the unsorted order you get by default. If you sort the list and then delete a label it is possible that the label that should be in that position is also deleted. I have attached a small project to demonstrate this. Open the Global Labels notice the order they were created. Now change the sort order, click on the column header I described earlier to make them editable and then delete the label in position 1. For a while I thought this was the only problem but recently there has been a number of instances where I have created a label, given it a carefully selected address only to discover that it is being overwritten by another variable. I have not been able to work out exactly what is going on but I believe it is connected to the sort order of the labels. Also if you sort the order and change an address, have you changed the address of another label? The only solution I have found is to keep label tables very short so they are managable without having to sort the order, that is probably good practice anyway 1 Axis software limits. I have been using a number of axes in pairs, in incremental mode as caterpillar feeders, using FX5U-40SSC simple motion modules. I had a problem that the axis synchronised to follow would suddenly stop moving, the customer was having to power down the machine and start again. This problem persisted for months with Mitsubishi scratching their heads unable to fathom it out and ultimately stating that the problem must be in my code somewhere. It was suggested by the customer that it may be getting to a software limit, I showed the customer that the software limit was disabled in the setup and it was confirmed by Mitsubishi that it was not the problem. guess what, it is a problem. Once the actual position reached the limit of the double word memory it would stop moving. The solution is the take the servos out of synchronisation in order to set the position (datum) to zero every cycle. Unfortunately the drives do not always re-synch on the first attempt so you have to keep trying till it does, this now causes slight variations in cycle times but it works. Andy EDIT: I have since been informed that to disable the software limits they must be set to zero. This implies that the Enable/Disable setting is invalid and the limits are defaulted to their respective max values. Surely a default to zero would be more appropriate.     Label Test.gx3
  16. CP1L connected with scanner symbol DS-4308 reading 2D data matrix,  with RS-232 on board CP1W-CIF01 Hi all, need some help because I can't read the information. Let me explain, I have a PLC, " CP1L-L14DR-D " with a RS-232 option borad " CP1W-CIF01 " , a scanner Symbol DS-4308, and I'm trying to read a data matrix 2d barcode (I don't know if that matters). so I build a cable with the next configuration, (one side male and the other female) PORT CONFIG PIN OUT SCANNER CABLE RJ-50 TO RS-232 PINOUT Maybe I'm missing a connection? a bridge? power supply ? ground?   in the program, I only have this to check the communication,       When my reception flag complete (A392.06), my instruction RXD is going to execcute, reading in D1500 the data. if is any error in communication (A392.04) or overflow (A392.07), my port is going to restart (A526.00) (ignore w0.03) with the followign config: (9600, 7,2,E, RS-232C, End code: Received Bytes 3       and I'm reading only, data on D1500 and D1501, and the data makes no sense.   with the configuration of End Code: CR, LF,          can't make it work, I read nothing. and if I change the END CODE: Received bytes to 4,      don't work. and my flag A392.04 go to ON.   PLC HAS 4 PIN SWITCH, ALL ARE OFF The configuration on the scanner is setting to default and then config to RS-232 Standard.   So, what I'm missing?  bad connections? plc don't support? scanner config? program?      

  17. A Series PLC and Data extraction

    inpras posted a topic in Mitsubishi

    Hello All, What are the methods to get the monitoring data from A series PLC? I know its not supported any more, interface modules are not available...,    So the basically,   If I want to write customer software (may be embedded) what is the protocol I need to follow? I am connected to CPU unit by the way, there is no other modules except few digital and analog interfaces on PLC. Thank you in advance for your direction, direction in any way would help!
  18. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.
  19. I currently have certain amount of Recipe data located in form of Excel file on to a PC with static IP address. Is there a way to get that data inside the Nj501 without using an SQL server as I currently have NJ501-1300 which doesn't support SQL. I am okay to send data to the SD card I currently have on NJ PLC as it is easy to get data from SD card to the NJ501.  If there is any example code or a link that helps me create i would be helpful. Thanks in advance. FYI: I am currently using NB10 HMI with NJ PLC.
  20. does anyone know about usb driver cx programmer for windows 10 64 bit? I can not upload / download programs without this usb driver. Please tell me if anyone has or there is a link for this, Thank You.

  21. How to download CPM2C-32CDTC-D

    putra25 posted a topic in Omron

    Dear All, i'm download CPM2C to cx programmer, but but download is always failed. Cable condition is good. i was attached my screenshoot about setting my port settings
  22. Hi, I've been working with RSLogix 500, today i found that i was unable to connect to Micrologix PLC because in the RSLinx the Driver Ethernet IP that was configured to communicate whit PLC appears with a Red Cross. Yesterday everything was working. I've installed an antivirus software, i supposed the reason was the antivirus, but i've tried on configs and even uninstalling it, and RSLinx seems that can't reconigze the ethernet adapter (guess that means red cross) RSLinx 3.51 CPR 9 SR 5.1 RSLogix 500 Pro 9.0 Windows 7 Ultimate 32 bits Could you, provide to me some guidelines to solve this, or if somebody has had this problem, could share the solution? thanks in advance
  23. Hello everyone, I am working with a NB10W HMI connected to a PLC NJ by Ethernet protocol, I would like to know where to start regarding the sending of data from the PLC to the HMI. I have a 50x15 array and should show all those values in the HMI for read / write. How to proceed? I started working with PLC for a while. I'm using Sysmac Studio to programm the PLC and NB designer to the HMI.

  24. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  

  25. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??