Search the Community

Showing results for tags '#mitsubishi #servo'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 404 results

  1. I have two plc, they are the same but I need to see and transfer the programming of one to the other. How can I do this ? I need a software?  What's? What's I need to do this ? Thanks. 
  2. Hello, there, I need some help  (a lot, maybe). I'm a rookie using PLC. In the company I work for, we need to receive information from the machines (plc controlled) remotely. We are using FX series (Fx1N, fx1S and fx2N in one plant and f33g and fx3s in the other) and I need to know how I can connect this devices (which Ethernet connector do I need, which software). If you can help me with the names I can do some research. Ah, you need to know that I'm in a 3rd world country (no easy acces to regional providers, well I can contact them via email). Sorry for my english, sometimes is a little rude but is my second language. Kind regards,   Ing. Eduardo M.
  3. widadi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot
  4. Hi , I need help in assigning Link refresh setting between PLCS ,B and W address exchange between QCPU s and  two DOPL module  connected in ring network configuration. We  have used qj71lp21-25 in 5 cpu station.    
  5. GX DEVELOPER

    I have a mitsubishi software programme in PCD file format and wanted to open the programme with GX Developer but couldnt open.  Any one with an idea, help please
  6. I want to control plc mitsubishi FX3U via FX-USB-AW, but when i send command RR (<ENQ>00FFRR0) by using terminal, plc FX3U always return 0x95 0x95 0x95 0x95. I setting parameter of plc like this topic: http://stackoverflow.com/questions/13807495/rs232-communication-protocol-mitsubishi-fx3g-plc Does anyone had experience with control plc via FX-USB-AW? please help me.
  7. Alpha2 Help?

    Hi Although I have used programming languages like basic and C for many years, I have recently tried to get to grips with programming (with the software (not direct)) the Alpha2 I have to admit that I am struggling! I have made a little progress since I worked out that you have to build almost everything at a very low level. But I still can not work out how you make variables that can be used in the program? For example : If condition A is true X = 10; But if condition A is false then X = 2. I have tried using the bit inputs on the math FBs to enable/disable values of X, but although this will initially alter the value , sending a 0 bit merely freezes the calculation and the value does not change. It seems like it should be such a simple thing to do? Is there a fundamental concept I am missing? Any help would be greatly appreciated
  8. Hello everyone, I am controlling a mitsubishi servo amplifier type MR-J4-20A-RJ with a Mitsubishi FX5U PLC. I am using DDRVI instruction to output the pulses to the amp with pulse/sign connection. Servo seems to work as requested, and cumulative pulses in MR configurator make sense. The problem: I can follow the output pulses and get a "position" from special register SD5502. If i understand it correct, the register sums the pulses output. If drive the servo to other direction, the register keeps adding up the value, not subtracting it. As i am new to mitsubishi, what would be the right way to get the position data? Is it possible to use the special registers for it, or should i just connect the servo to output the cumulative encoder pulses to PLC?   Thank you all for your time!
  9. Hi, I am not an advance user of PLC's but I can muddle my way around. I am currently reviewing a program written by another person and I will need to make some modifications. I have noted that on a M8002 pulse the Mitsubishi FX2N-8AD CH5 to CH8 -[To K0 K1 H3333 K1]-  are all set for a 4-20mA current input which is perfectly acceptable however on the same pulse is written -[TO K0 K22 K0 K1]-. I was hoping that someone could explain exactly what this is doing. I understand that the first K0 is the module number K22 is BFM#22 but I am not sure exactly what this is and I am a little confused by what is written in the manual. (8.2.7 BFM #22: Sets convenient functions: The functions described below are assigned to b0 to b3 of BFM #22. When a bit is set to ON, the assigned function becomes valid. When a bit is set to OFF, the assigned function becomes invalid..............) .Due to not knowing exactly what BFM #22 is doing I am unsure why the next K0 is used and the final K1 is to do this operation once? I apologise if this seems like a very basic question but I just can't seem to find any further detail online regarding BFM#22 that I can understand. Any help would be greatly appreciated. Thanks for your help. Paul.
  10. I an seeking guidance on how to link two mitsubishi PLC over Ethernet and have them pass bits/words between them.  PLC 1, Q03UDV built in port  ---- GXWorks 2 v1.54N   192.168.1.39  (QJ71 in slot 1 is also available if req'd) PLC2, Q02H with a QJ71 Ethernet card in slot 2.  Same GXworks2   192.168.1.35   I know with a modbus or CCLink setup, there is a place to declare the buffer > X/Y parameters, but i have found no such parameters for the ethernet connections. I found 1 document describing the JP.Send instructions but I have not been able to get that to work from the example.    any help would be greatly appreciated.     
  11. Mitsubishi Diagnostic

    Hello everyone. If anyone knows how an empty slot on base  is defined by "system monitor" service of GX Works which shown in attached picture? I think this information is read from any CPU register address(Maybe SD or SM and  etc. registers). But I don't know exactly which address is deploying an information about empty slot on base. Thanks.
  12. Hi guys, been using this site for a long time, it has come in handy alot. However I have recently taken on my first servo project, heres an overview of the project We have a filling machine that has a separate dosing system to the filler head. It used to keep the dosing in time by adjusting a 0-10v signal to an inverter to make sure that a flag makes a sensor in a set window. I have installed an encoder on the filling head and an mpl servo to the dosing. I have then used an MAPC instruction to follow the encoder, the cam is 0-360 and it follows a straight linear line. I have installed of this as a temporary set up on one of the filling machines (we have 2) and it is working perfectly. I have now installed this on the second machine as a permanent set up with a panelview plus 7, L71 cpu. However it is giving a very strange problem on first power up, the encoder is giving the exact same position as before it was powered down. however as soon as the MAPC executes the servo axis  faults, giving an overspeed fault. the servo doesnt even look like its attempting to move (however it is through a 10-1 gearbox). if i then home the encoder it then runs absolutely perfectly until it is powered down again. I am beginning to think it may be to do with the master lock and cam lock position, as the cycle stop position of the two machines are different. however I just cant seem to get my head around i the difference between them.   Hopefully that makes sense any help would be greatly appreciated Thanks Rhys   c1_dosing.ACD
  13. Kinetix 6500

    Hello All, I'm completely new to the motion control systems and I'm interested in learning servo programming and motion control. I was trying to find a good resource that I can start learning from A-Z, but I couldn't find any. I have a demo kit with compactlogix processor and two kinetix 6500 drives with servo motors. What is the best way to learn it. If you guys have any resources or basic sample program please help me. Any learning material would be helpful. Thank You All
  14. Error on Mitsubishi Servo Pak

    I have a Mitsubishi servo Pak #MR-J3-40B with an error 25 and 95 flashing. Could not find any help on the web or in the manual. Any help appreciated.
  15. Devicenet module

    Hi everyone  I have a question with the programming of the devicenet module (QJ71DN91) for mitsubishi i don't know how to update the eds files for the slaves, could anyone help me?
  16. promblem plc

    Hi , I started my plc about 5 years ago for plastic unit but now  When I turn them on, the correct screens appear on the HMI terminal, but no data is coming through from the PLC. After a few seconds, a pop-up appears sayingPLC No Response 00-00-0". Does anyone know the meaning of this message.Then I am on and off several times so that the device is turned on and working properly. I DON'T KNOW ?
  17. Hi guys, I'm having a problem on how to save the home position for omron servo driver. How does the servo driver know where the home position is after turning on? Btw, I am using Mitsubishi FX3u for my PLC
  18. Position Controller

    hi, im student im trying to make a position control with the misubishi serie of servos, i have 2 mr-j2s-20a and 1 fx2n-20gm i was reading the manual i didnt readed all yet, i wat to know if i can control the position with a fx2n plc and if someone can send me a example of a code using it. thx for your attention 
  19. I need to learn about position control for 2 axis with a QD75MH2 module. I know how the basics about programming with the Q Series PLC but I've never done any positioning control. I'm having a really hard time understanding the program I have to modify and I don't know where to start. Is there any course you might recommend? Even if I have to pay for it. Thanks.
  20. Beginners Servo Help Required.

    I have been programming Omron plc's for a while but have not used any servo drives. I have customer who is free issuing the following equipment for a project he wants programmed.: cj1m cpu21, r88d-gt04h, r88d-gt08h, r88m-g40030h, r88m-g7503h-s2. The small drive is connected to a simple ball screw moving a stop. The second drive is connected through a gear box and chain drive full details not known to date.  I have read the cj1 manuals and will be generally using  pls2 commands for the position movements.  Are the drives plug and play? If I connect the drives leaving the parameters as out of the box defaults should the drives operate using the pls2 command. In this condition I assume it is 10000 pulses per rev of motor. I can scale positions with maths in Plc and send the required pulses. Any guidance appreciated to confirm I am on the write track. I assume I could also use the electronic gearing parameters. Any examples using 5mm ball screw!    
  21. Hey guys, first post!  Friends at Practical Machinist sent me over here b/c we were stumped.   I have a Mitsubishi 500M control CNC machine.  There is a section of the ladders that i don't understand, and Mitsubishi couldn't help, and the OEM is defunct.  I do not have a hardcopy of the ladder circuits. I have an output , [Y13], that i can't get to turn on because of an internal relay | M453 |       see pic 1 When i searched for relay M453, it seems as if it's in some sort of array function.  see pic 2 None of the relays from M448 thru M512 ever turn on.  I understand that all these are controlled thru this circuit, but i have no clue what is going on with the R registers, and how the heck these internal relays can be turned on. Can you guys help explain?   Thanks!
  22. PID (Q62HLC) in Q Series

    Dear all, do you have some ready examples for Mitsubishi Q series(Q12HCPU) where you use PID (Q62HLC) ? I use two analog input from 4-20mA and two PLC output. I acept 2 signal from level sensor. So how can I use PID autotuning? As I see in examples in manual, there also have other parameters, which I must set, except PID function. Thanks in advance .
  23. I/O configuration error FX2N

    Hello please could you help me with this problem . I have FX2N-16MT CPU with expansion modules FX2n-16ex-es , FX2n-16ey-es in that order . when i download the program on it and moniter online  i have active output on y22 ,y25, y13, y00, y27 (software) , i only found led of y00 (CPU module) ON , others of expansion op module not  (P.s power lamp on module on ) , however the expansion of ip doing well , .  i do that trails . 1-change combination to be FX2N-16MT CPU - FX2n-16ex-es -  FX2n 16eyr (new one) , but same happen  , when i go to plc diagnostics i found error 1010 i/0 hardware configuration  2-   FX2N-16MT CPU -   FX2n 16eyr (new one) , but same happen 3- FX2n- 14mt CPU (New one ) - FX2n 16eyr (new one) with same program it works ok  .  i wondering how melsoft software recognize expansion module of FX2N series and if it need hardware configurations (by rack like siemens plc ) the way of addressing ip and op in mitsubishi plc FX2n series . how to change it . and if i wanna to change the cpu 16mt , by 14mt ., does i need to change spacial markes or function on the machine program . . i m sry for my bad english and thanks in advance     
  24. Hi guys! As the title explains, i wanna move a value to 210 -> 220... is there a function for that or do i have to make a MOV for every single dataregistry (look at picture)? Its an mitsubishi FX3GE PLC programmed in GxWorks2. Br, Jim  
  25. Hello Dears, I am studying to control position via Mitsubishi device Now, I have Q172 CPUN and MR-J2M(MelServo) to control position. But, I didn't find manual that explain command and parameter to do it and it has the example to do it. who have experience to control position, pls help me to overview it. Thanks so much!