Search the Community

Showing results for tags 'software'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 84 results

  1. Hey guys, I'm sorry if this has been asked here before.  Whenever I search, I'm getting: Error code: EX144 no matter what I search for.  Anyway...  I wanted to find out if anyone had recommendations for software that I could use to layout a panel.  It doesn't have to meet any regulations, or be legally certified by a PE, I just need to mount a bunch of PLCs, DIN Rail, some sensors, VFDs, all of that fun stuff, and I was hoping maybe some software existed (...that I could afford--an important distinction I should include!) that would have all of the most common PLC racks, (AB, S7, GE, Ti, MOD) with all (or most) of the hardware to go along with it.  In a perfect world maybe even allow loading of .stp files.  If it tracked all my inter-module connections (Ethernet, DH+, DH485, RS485, MS/TP, Profi, and so on) that would just be the cherry on top!  I'm open to Open Source, or even Visio, if someone has created all the common PLC racks into module I could load and drag around.  The big thing is, I'd like to know how I can arrange the PLCs and all the DIN mounted devices to make the best of the space I have.  I'm talking about 23 different PLC racks, and at least twice that many DIN mounted gateway modules.  Then, a handful of VFDs; PF525, PF755, PF40, a PVP+, some NET-AICs and NET-ENIs along with power supplies breakers, some relays, IO-Link boards, and so on.  I'll figure out the wiring another way if I need to.  First, I need to arrange and organize the racks so I know where I can run the cable track, and maybe even figure out how much of I am going to need. Many thanks a head of time, guys.  If software exists that is $10k…it is going to be out of the question.  But, if there are some that might cost a couple hundred bucks, or maybe even online sites where I can pay for a year or so to design these couple various racks I need to define, that would be wonderful.  
  2. Smart 700 IE V3

    What software use to get program of Smart 700 IE v3 Siemens HMI and where can I get software free for this.
  3. Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?
  4. PT property NB series

    hello everyone, I want to ask this setting. If I check this check box, what will happen to the program that I input into the HMI? can someone give me examples for not allow upload and not allow decompile?
  5. Siemens Logo PLC

    Hello Experts Can someone please tell me if Communicating software for Siemens Logo PLC is downloadable? Regards
  6. Ok I'll try a different angle of attack. I have acquired an S7-1212c unit. It is just too new for my TIA portal, which is V 15.1 The new PLC I have has firmwear 4.5 the TIA portal I have only supports 4.3, I get some errors regarding synconization etc. and it's like there are some tins that don't work. how do I update the TIA portal to the correct firmware I've tried updating the HSP files but it doesn't change anything https://support.industry.siemens.com/cs/document/54163658/how-do-you-update-the-hardware-catalog-in-tia-portal-?dti=0&lc=en-DE
  7. Dear Experts We have a machine with Allen Bradley Micrologix 1400 PLC, Panel View C400 Request to share communicating software and cable details please  Regards
  8. Hello there, I am new to the forum and had a question regarding a setting in Sysmac Studio.   In the Basic Settings for my NJ301 there is a setting on this particular line that is set differently than the other lines I have worked on. This setting is called "System service execution time ratio". On all the other lines I have worked on it was set to 10%, on this line it's 25%. This line also seems to have the most issues with controller performance out of all the lines I have worked on despite having less complexity. I was wondering if anyone knew what this setting actually does and if it should be changed.   Thank you.  
  9. Hi all, I'm not shure if I saw it once, a Spanish site with a rugged I/O shield for an arduino plus a software package to build an Arduino-PLC packet. It was pretty much $$$ raised... (on my oppinion, for my application, not to dispretiate their value). Has anyone thought of it or knows of such an ensemble: A general Arduino board, a general kind of "plc-shield" (some inputs, some outputs,...) and finally, a (preferably open-source) software package to make an off-the-shelf Arduino-PLC ish? Maybe it all exists with some name changes, or this question is of a huge ammount of ignorance. Thanks. Corvo (means Raven) 
  10. GX Works 3

    Hi everybody! Recently I've got problem with installation of GXW3 on my PC There is a message "Any of the MELSOFT products or other software may not be installed normally. Please restart computer before installing this product" during installation. Of course I restarted PC)), delete all Melsoft products from my PC,  please i need your Help here ver 2.7 IQWORKS  I have Windows 10 64bit .  
  11. GX Works3 Projectlib Locked

    Hello, I have a problem that I need to solve in a PLC program has it's projectlib locked.  I work for a company that contracted a PLC programmer before my time to program their new version of their control cabinets. The company did not write any specific contract with the contractor and just relied on his work. The guy later delevered a buggy software that is kind of functional (the bugs came up at the commissioning after the guy was paid and now he refuses to help or to provide more consultations). I have as a task to freshen this up and make it work without bugs, the problem is that the Projectlib is locked and I cannot access the source code.  The only thing that I can changes that I can make to the code is to put some logical circuits between the I/O of the already existing function blocks, which solved some problems, but not all and it keeps one of the most important ones as well. Anyways, that's my story, so now my question is, is there and possible way of unlocking the projectlib? Any feedback would be highly appreciated. Thanks in advace!
  12. GX Developer

    Hi, can anyone help me please. Newbie to plc and bought a mitsubishi and was told off the ebay seller that gx programmer is free to download? I looked on mitsubishi and coukd not find it? Does anyone have a link they could help me with pls. Regards  Andrew 
  13. Omron NB Software

    I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
  14. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  15. GX works 2 software

    Hi guys    I am having trouble installing GX works 2 software. The software is fully legit and came with 2 license keys the first one I put on work laptop and second on my personal laptop. The install all goes fine but when i try open up GX  Works 2 I get this message from the attached image. I have plenty of room on my pc and even have other PLC from different manufacturers on it without issue but the GX Works is just giving me grief and I have tried to increase data on MY laptop and other windows fixes but still get this message when I try open it.  Has anyone else encountered this problem before or any ideas?   Cheers guys     
  16. Quick Designer Software

    I am looking for a working copy of software that will work to modify screens on an old Quick Panel.  I believe the software is called Quick Designer. The old Panel I am trying to access is serial communication only. I have bought an interface cable from PLC Trainer.  I have a Windows 7  32 bit machine ready to go. Thanks, Scot
  17. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  18. Dear friends.. I want HMI panel view 300 software.. Is this available in net or free of cost in web sites
  19. Hi Dears, I have 2 No. CPU 315-2PN/DP (6ES7 315-2EH14-0AB0) I want to use this CPUs for S7 300 Software Redundancy. I Have 2 CP342-5 too for IMs. I want to use profibus port of this CPU for synchronization. if this CPUs are suitable for software redundancy? or I can not use this CPU and I must to use CPU-315-2DP instead?   Thanks
  20. Zm-71se

    Is there anyone, have this software? Coukd you help me
  21. I have a 1996 Howa Vertical Machining Center running on a Mitsubishi M520AM control. 3 Axis with Jig Changer on the main control. ATC and 16-tool magazine on 2 each Model E/FCUA single-axis amplifier/controls with a DIO extension interface to main control . I lost parameters and User PLC program to the 2 Model E amplifier/controllers at  ATC and the Magazine servos. Dead batteries, and both units are back to defaults. Main Control and Operation Panel work. I can read the ladder and write to CPU ladder from the operator panel, and I have a paper copy of the main ladder and parameters. I have a working FCUA-CT200 pendant to communicate with the 2 Model E controls, but no way to program a new user ladder and upload it to the Model-E's. Anyone know where to find PLC software for 1996 vintage Mitsubishi CNC controls? I can probably make any kind of interface cable it would take to get from a PC to the control. the FCUA-CT200 teach pendant will let me enter parameters  via 'PLC I/F' but it won't let me program and read/write a User  PLC.
  22. PLC password crack - FATEK

    hello, can any body help me about plc password crack, I have an old FATEK PLC and i want to upload the program to my pc but i don't know the password. please any one here.   Much appreciated if you can help me.Thanks 
  23. Hi All I need software for ALU201L, it is an old Schneider plc Thanks
  24. Mitsubishi

    i want mitsubishi plc programming software gt works 2 basic version