Search the Community

Dear Experts!!! I am facing one problem in FT View SE v8.0 : I have 15 screens : 5 "are replaceable" with full resolution and other 10 are popup displays with half the resolution of that of Monitor and are "on the top" type. I have a buttons to go to those pop up screens. Whenever I press any button to open any pop up screen the background screen (Replacable type, full screen) becomes shorten and pop up displays works like they should. i.e. whenever a pop up display opens, full background screen display suppresses automatically. Then i go to another full screen and then come to the main working full screen then it becomes ok. This phenomenon occurs whenever a pop up display open (not VBA controlled). Its a simple display open button ( not VBA controlled) As you can see in the picture the back image is suppressed :- http://postimg.org/image/c5um49c5h/ Normally it comes to full screen , its like :- http://postimg.org/image/vtli1bd7f/ when I go to some other replaceable type screen and come back again to this screen, it becomes OK. Here in this pic below, you can see the properties of the screen which is giving problem :- http://postimg.org/image/gcqpkfb65/

I want to put a Numerical Input on the screen to show a timer counting up. How do I make the display show whole seconds instead of tenths of a second as set by K in the timer? Is there somewhere that I can divide the input by 10? Thanks Denbo

Hello, I'm from Poland. I would like to use the Sony Xperia Z to communicate with Omron NB screens using free software Omron HMI Remote Viewer. Unfortunately, I can not install this software. The attempt ends with the message "Your device is not compatible with this version". Android have software version 5.0.2. Does anyone in this matter can advise me something? Thank you in advance. Bogdan

We are a vendor specializes in industrial automation field. many customers almost from all the world order industrial products on our website FastToBuy.com. we sale products include industrial control system PLC, HMI, Motors, even industrial PC and accessories, communication device, electronic components. Also we are the agent of many China integrated circuit factory. Not only supply all kinds of low price LCD screen products, you should know most of LCD Made-in-china is cheaper than other famous industrial brands and with a high quality, but also supply efficient solutions to solve our customers, we gained a reputation in industrial automation field, on eBay and AliExpress, you search "fast to buy" can find us,. In a word, we only want to make more people know us, we supply nice products with a high quality service.

Hello, would like to change some ideas with you. I´m working in a new project and need convert an SLC500 to Controllogix, with a 1747-AENTR is possible create a SLC500 Eth remote.... but in my case i have two 1746-A13 (conected by expansor) and can´t add all the modules in a rslogix5000 aplication. In the 1747-AENTR manual say that is possible in the v21.00 of the rslogix5000... I really need install this new version? Don´t have other way? Thank you! Vitor Prado

I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks.

Hello, I'm working with some old Allen-Bradley SLC5/04 systems with 1747-SN modules. The module is located in Slot1. One system is only using the RIO module for a PV1000. How do you know where the "M-Files" for Analog I/O modules and/or Panelviews are located? I see programming using locations such as: M1:1.810 where 60 words are being copied from a Remote I/O PV1000 to some words for the SLC to utilize, but I don't understand why "M1:1.810" was used instead of, for example, "M1:1.800"? I looked and so far cannot find information pertaining to the words other than what is in the User's manual, and it doesn't address this issue. The panelview in my example uses all of Logical Rack 0, Full Rack addressing. Any help would be most appreciated. I have very little experience with the RIO stuff because almost everything I've worked with in the past has been Devicenet.

I need to change the IP address of an existing PLC. Only access I have is remote (VPN). Is there any issue with downloading the same program - with the IP address changed - to the existing processor? Then change the local network range to match, etc...