Search the Community

Showing results for tags 'program cable'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 99 results

  1. FX-2NC-32MT Battery & Communication Cable

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, FX-2NC-32MT PLC need to change Battery, Can you please tell me the battery model no? Which communication cable require  for FX-2NC-32MT PLC upload or download program? Thanks & Regards Sohel Ahmed
  2. Hello, We have a FX3G connected to a FX3U-ENET-ADP inside a main cabinet. We are then using that master PLC to collect data from 2 other fx3g plcs in a node:node serial network. I was assigned a small project of pricing out some wireless adapters so we can upload/download to the two slave plcs. My question is, is it possible to upload/download programs to/from the slave plcs through the ENET adapter and serial network in the main plc? It would save us some money if possible. thanks.
  3. Hello all, is anybody out there who may read out a program that is stored on a telemecanique cartridge (more or less of 1993)? Program is still running on a TSX 47 40, but have an identical second cartridge. I would send it to him/her even if international post and do not necessarily require the cartridge back. Would be great to have the program as a text file / pdf / hardcopy. Any help appreciated!! Best regards Stefan
  4. Hi, I have an old TSX 47 30 that has an I / O fault (red led on) green led on run and plc stopped. I'm writing to see if you can help me to establish communication and achieve the download of the program. I do not have the communication cable or the PL7-3 software under OS 2. So far I have done searches on the schneider page, forums and all the links are lost or deactivated. I have read your answers in plc of the same series and I observe that a converter rs 232 to current loop is needed. In this case here in Venezuela it is difficult to get this converter, however I have observed the black box model 232 CL-E, CL050A and I think it can be useful. I also have an old toshiba laptop with windows xp with a native rs 232 port to avoid another converter and I could make the connection cable DB25-DB9 to the PLC. Now I would miss the procedure to make an OS / 2 bios and get the software or make a virtual machine in which case I require the appropriate software .. thanks for your help
  5. I am looking for how others have set up vertical axis motions using the Kinetix 5700 servo system. I have a 2 axis pick/place unit with a horizontal axis (X @ 2500mm) and vertical axis (Z @ 1200mm) that works as designed during normal operation. X axis has no holding brake and Z axis has a factory installed 24vdc to unlock brake. There is a GuardLogix L81ES control system that handles the safety and control. On pressing E-stop/opening Gates the vertical axis will stop the motion, apply the brake and hold with no problems. (2198-D032-ERS3 Drive, 2198-P031 Bus Power, MPL-B430P-MJ72AA X Axis, MPL-B330P-MJ74AA Z axis) The issue that I ran into was an accidental download of the program without activating the e-stop and the vertical axis dropped unexpectedly when entering program mode on the processor. I am aware that this instance was my fault as the programmer, however I am also concerned that this might occur again in the future if the controller ever enters fault mode or someone else completes a download. I have done some investigation with the "ProgrammedStopMode" parameter on this single motion axis and attempted all 5 options and the vertical axis still has a free fall drop for a second before the brake grabs hold - so evidently this is not working for me. (Page 24 of Vertical Load/Holding Brake manual - https://literature.rockwellautomatio...t003_-en-p.pdf) I am curious if there needs to be something done elsewhere as the X and Z axis are set up as coordinated axis? I also am unaware if I need to preform some action/parameter with the bus power supply for this? The current state of the machine as it sits now is preforming a MSF in manual mode after 5 seconds of inactivity or 30 seconds in auto mode. This axis is usually in demand every ~22 seconds. This will shut down the axis after preforming a brake test on the vertical load and seems to function OK, however it is still in the back of my mind the issues mentioned previously if we ever enter a controller fault while indexing. Thanks for your insight

  6. What Is a PLC Communication Error?

    ananyagupta posted a topic in Other PLCs

    PLC doesn't respond to communication requests or responds negatively to such requests. A PLC communication error can occur between the programmable computer and the devices it controls or when the technician attempts to program the device. If anybody have idea then share i am fresher now i learn it from CETPA INFOTECH. I think this is the best place to ask.
  7. hello every body.  I want to upload program from  HMIGXU3500 . I have  Vijeo Designer Basic v1.0   software Is it possible to upload program from this HMI.? I want to have back up file 

  8. [ASK] Driver for FX3U-USB-BD

    Haniv posted a topic in Mitsubishi

    Dear all... I am new here. I have a problem when connect my laptop to new PLC FX3U series. There was sign that I must update a driver for FX3U-USB-BD. Where can I get it for free? Could anyone here help me to share a link please?   thanks! Haniv

  9. Program lost after battery replace

    Antonio Tavares posted a topic in Mitsubishi

    We think so we lost the program after a battery replace, because the program isn´t loaded on GOT. Is it possible restore it by the PLC?
  10. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free

  11. Granite Line Polisher Machine

    Indiajay posted a topic in Mitsubishi

    Hello friends, I have been working on Granite Line polisher machine. I have completed the program but there is a requirement for polishing the Uneven shape of granite slab. Has anyone worked on logic of this machine? Can anyone give some idea for the logic or the Plc program. I have seen Chinese machine manufacturers giving this feature. 
  12. My SLC 5/04 is currently connected to a PanelView 1000 having only the RS-232 and using the SLC's bottom RS232 Port.  The PanelView Cable we can disconnect and connect a laptop, go online and troubleshoot problems, BUT we have to disconnect the laptop and reconnect the PanelView to operate the machine. Question:  Which of the other two Ports on the 5/04 could I use for the laptop connection leaving the PanlView connected? Also what cable to use on the 8-Pin Programming Port or the 3-Pin DH+ Port?
  13. Can I download program to FX5U By SD card ?
  14. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?

  15. Mitsubishi GT DESİGNER GOT1000

    Reza lotfi posted a topic in Mitsubishi

    Hi,  I need this program Please help me  R.lotfi@gmx.com
  16. Hello all - Wanted to check in and get some ideas on how everyone else out there stays organized with the various connectors, cables, etc. Currently I have been using a decent sized laptop backpack (keeping my laptop in there, spare battery and charger) along with various cables, connectors, external drive, CDs, screwdriver sets, wire crimps/strippers, etc. Seems though as I've been getting into different projects, different PLCs and such that the 'inventory' has been growing. Just wanted to hear others thoughts. Also, if you could maybe throw out your NEED TO CARRY items I'd be interested in what everyone else has to say. Sorry if this has been posted before or somewhere else. Thanks,  Kyle
  17. Have a micrologix 1200R 1762-L40BWAR.  If anyone could help with providing the following information: Need a communication port with single receptacle that will mount through the door of electrical enclosure and then the communication cable (6 to 10') that will go from the com. port to the micrologix. Thanks
  18. Hello folks,   I am a rookie, self-training in PLC programming. I have written an SFC exercise (attached ACD file). I also try to call STL written subroutines and add-on instructions, from within the SFC main program. Calling the created subroutine works fine, but calling the add-on instruction fails from a reason which is above my level. I tried, tried and tried different solutions, with no avail. I am either wrong in writing the add-on (perhaps some missing but missing tag ?), or wrong is calling it. Can someone please give me a hint on what I do wrong ?   Thank you, Radu PS . I use Studio 5000 v24, combined with RSLogix 5000 Emulator.     SFC_trial.ACD

  19. PLC trainee

    Radu Babau posted a file in PLC Sample Code

    Version 1.0.0

    80 downloads

    SFC test file; cant call an STL written add-on from SFC main program

  20. [PLC Sample Code] - PLC trainee

    Radu Babau posted a topic in Download Comments

    PLC trainee View File SFC test file; cant call an STL written add-on from SFC main program Submitter Radu Babau Submitted 02/04/19 Category PLC Sample Code

  21. Panasonic FP0 C14RS

    esso1972 posted a topic in Other PLCs

    Hi All, I am new to the forum and new to programming PLC and like every newbie I have a lot of questions - Brief History of me - I had been a Manufacturing Technician for 20 years and recently got my BS on Electrical Engineering and now working as an Equipment Engineer. The main reason that got me interested in PLC's is my degree,  the field that I would like to get into and a recent problem that arise at work. My experience with PLC is very small in programming, some in TS I/O- However I had been studying by my self to the point that I built a test bench to understand it better and in the future create different project for learning purposes Currently I am putting together a tool Alarm delay program - Basically my exhaust sensors trigger an alarm (input signal turns OFF) before its send  the signal to my tool for abort, I want to create a different Alarm which will cause a different response from my tool and delay the original Alarm by 10 min and then trigger the original Alarm - PLC = Panasonic FP0C14RS  Reasons: Create a different Alarm: The response from my tool to this alarm will allow me to return my material back from the tool and put it in a safe spot. Delay the Alarm: Use a timer to perform this tasks - This the time that approx. it takes the to return the material. Trigger the original Alarm: I need to know which sensor was the problem in order to properly TS- So after my timer is complete - I want to know which sensor created the original Alarm My Current problem: I created the LD program, and while the original alarm stays OFF the program works fine - but since my exhaust sensor are always on - If my original alarm is trigger for  a few seconds, just enough to start my Delay Alarm: I dont have a way to know which sensor trigger after my Delay(Timer)is complete,  I reset my relays in order to be ready for new alarm.   Please provide feedback to my program - I know currently is not the best way or efficient way to do this and there are better ways, but my plan is to get it to work and then later revisions improve the way the program can be written   Thanks in advanced for your feedback and help Exh_delay_inv_rev1.pro

  22. ladder program

    diraemon posted a topic in Mitsubishi

    Hello everyone, I want to know why the Y172 coil is ON / logic 1? whereas contact SM1 is worth OFF / logic 0? can anyone explain it to me ?
  23. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  24. Please,if anyone has a working program (.stx).I need it to test a PL7 JUNIOR software

  25. PLC program uploading automation

    Olivier posted a topic in Mitsubishi

    Hi, In conception phase we currently use GXWorks to upload programs to PLC (L-Series). In production mode, for different security reasons we would like to automate this transfer so that the operator does not access directly to the program. Do you know any tool allowing this by using command lines and not GXWorks UI ? (GXWorks does not seem to be "command line" friendly As a POC I  have automated the GXWorks UI in C#  (by simulating menu or buttons clicks) but I don't find it reliable (what if an unexpected popup "pops" ? ). PS : I am a totally noob in this PLC world so maybe I missed stg in the docs ...