Search the Community

View File Modbus Master/Client for HMI/SCADA  Overview: The Modbus Master or Client provides an easy and reliable way to connect Modbus Ethernet or serial Protocol Compliant devices with applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports all Schneider Electric (modicon) PLC’s and all other devices which use Modbus as a protocol. Open to support future models for this series of PLCs. Features Modbus/TCP Client or serial Master for communication with Modbus Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) Supports all Schneider Electric (Modicon) PLC’s or any other device which use any flavor of Modbus. Supports DANIELS/ENRON Modbus extensions. Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. Performance –500mhz Pentium–10 words: 15msecs–100 words: 35msecs (avg) Full implementation of Class 0 and Class 1 Modbus functions as well as a subset of the most commonly used Class 2 functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers: Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

You can buy books programming Modbus TCP / IP with C# language on Google's Play Store Link: https://www.youtube.com/watch?v=gC2Y...OgG_veiieCTor6

I'm designing a PLC system in which a Micrologix 1400 talks Modbus TCP/IP with three Modbus TCP-capable SCR controllers. I've never done Ethernet/Modbus TCP communication using the 1400, so I'm asking the following questions: 1. Can I connect the 1400 PLC and the three devices to an Ethernet switch and configure Modbus TCP communication from the devices to the PLC (data collection only) ? The switch will also be connected to the customer's DCS, receiving the data from the PLC and the three devices. 2. Can I connect the Ethernet port on the1400 PLC to the Ethernet switch directly, or do I need some kind of Ethernet interface, like the 1761-NET-ENI ? 3. The system also includes an HMI, connected to the 1400 PLC by RS-232 communication. Any issues with communicating with the HMI and doing Modbus at the same time? Your help in this matter would be highly appreciated. Thanks. Ron

Hi, I have LJ71C24 modbus module as a master and slave device with the RS-485 Half-Duplex (Modbus RTU). If someone could tell me what is the correct wiring and what are the correct parameters for such communication (Transmission control, do I use echo back parameter..???). Right now, I short-wired SDA-RDA (with A of slave) and SDB-RDB (with B of slave). Also, I am trying with the predefined protocol using Schneider Modbus protocol. Is this ok? Best regards

Developed new software Modbus_TCP_communication. I. Modbus_TCP_Communication 1. Program Modbus_TCP_communication designed to exchange information between your Android smartphone and controllers PLC with Modbus/TCP. Information is exchanged through the computer and the router, wherein the router is connected via Wi-Fi network with your smartphone, and computer connected via interface Modbus/TCP with an PLC controller. The software has the following modes :  - modes read/write of words holding register (FC06);  - modes read/write of words input register(FC04);  - modes read/write bits coil(FC05);  - read the contents of the directory computer;  - reading contents of a text file of computer   etc. The program Modbus_TCP_Communication consists of 2 parts: - Modbus_TCP_Connection.apk - is implemented on the smartphone -   setting and monitoring of parameters and variables on the smartphone for   information from the controller; - Server_Send_Receive.exe - implemented the computer - server computer for sharing   information with a smartphone and a PLC controller according to the protocol   Modbus/TCP, computer is  Master for exchange of information,   a controller PLC is Slave 2. IMPORTANT !!!  The smartphone communicates with the router via Wi-Fi network. Wi-Fi router can be connected  to local or WAN networks. Obviously, the router must be properly configured  by the system administrator. It is also obvious that the device and the router must belong to  the same Wi-Fi network.   3. Work application Server_Send_Receive.exe tested on computers    running the operating systems Windows XP and Windows 7.    Work application Modbus_TCP_Connection.apk tested on Samsung and Philips smartphone    running the operating system Android 5.0, Android 6.0. It is better to use a smartphone    with a diagonal of 5 inches and above. There are examples of this program for the  control system of cold rolling of tubes mills is implemented in India and Ukraine, where the applied controller  PLC is MP2300S (Yaskawa). 4. App Modbus_TCP _Communication - paid, the cost per user is$ 5 USA.    Distributed through Google Play.    App Modbus_TCP_Connection.apk must be installed in the internal memory of the smartphone -    not in SD card !!! 5 Modbus_TCP_communication has a detailed guide in Russian and English languages.   The address to download the full description - https://yadi.sk/d/dQ1fxOgnwh68u   Read the description for purchasing the app !!!   Address to download Server_Send_Receive.exe formed   on the screen Modbus_TCP_Connection.apk;   IMPORTANT !!!: on your computer must be installed the driver for Modbus/TCP, designed   company OMRON. Link to download it is formed on the screen Modbus_TCP_Connection.apk, when   entering the program !!! Log on to this website (for download driver)  can only registered users OMRON.   The path for downloading on the website OMRON - Sofware Downloads - CX-Supervisor - Modbus TCP driver.      Enjoj.   Copyright Dr.-eng. Alexandr Ryss. Moscow. 2016.   ab.ryss@yandex.ru      

Hi all, I am trying to control and/or read values from Schneider Altivar12 VFDs. Via Modbus on a AB Micro850 PLC (using the Connected Components Workbench Software). There seems to be two ways to do this with the Micro850, either with messaging (using the msg_modbus instruction function block) or with the Modbus mapping feature. I have a list of the communication parameters (see attached fileATV12_Communication_parameters_BBV51917_1.4IE05b.xls ATV32 Communication parameters_a1.2ie03.xls) But I haven't had any experience with Modbus and I am not having any success. There is not very much documentation about how to do this, If anyone can help me who has done this or knows how to do it I would appreciate it.  

Hi, i want to make a function block which will contain a block GP.CPRTCL (for predefined comm protocol). GP.CPRTCL has an input "Un" who only receives constant (H,K). On input of my own function block i can set a constant variable, but inside block that variable isn't a constant anymore (GP.CPRTCL doesn't recognize a variable). Is there a way for receiving constant variable in GP.CPRTCL block ("Un") if it is in another block. Regards

Hello everyone! I need your help.  I use the PLC: Q06UDEHCPU and the module: QJ71MB91. I programmed in the program GX Works 2 I instaled a library of "QJMB91ModbusSerial_V120 (FB - QJMB91ModbusSerialMaster)" and using it wrote temperature sensor interrogation program. The sensor is interrogated by the channel 2 and has the following switch settings:  Switch 1 - 0000; Switch 2 - 0000; Switch 3 - 0000; Switch 4 - 0A04; Switch 5 - 0000; which are specified by the PLC parameter in GX Works 2. I found an example of writing a program to install the switch settings in the user manual QJ71MB91 using ZP.UINIT instructions. I wrote a program to this exemple. Not prescribed bit address, which should be established when the program is executed (M0) (ZP.UINIT  "U4"  D0  M0). I wrote: ZP.UINIT  "U4"  D0  .  After executing ZP.UINIT instruction PLC stops working, blinking error, settings module is not install. How can I write a program to configure the Switch Setting?

Hello! Is it possible to run a program only 1 time when i turn on the plc? In siemens it was ob 100 or soemthing like that, that program only runs one cycle at startup of plc. I want to make sure some bits are off at startup to be in safe position Thank you for your help!.

Greetings, I have L02CPU and LJ71C24 (for serial comm) and they act as a master. For slave I have some energy analyzer device. Device has a Half-duplex RS-485 serial interface (Modbus RTU protocol). Master only needs to read some data from slave. My question is: What protocol should I use for mentioned communication (MC, Predefined, Nonprocedural, Bidirectional)? I saw that if I use Predefined protocol I can select in Predefined Protocol Library, under the Manufacturer, Schneider Electric - MODBUS - 03: RD holding Registers. Is this OK for my type of communication? I will try to do some testing between LJ71C24 and QJ71MB91 (who will act as a slave), this or next week, but it would be helpful if someone can tell me correct protocol for my type of communication? P.s. I am using GX Works 2. Best regards, Luka

Hello. I'm trying to use index addressing inside function block.  The command *D200 doesn't work. Is it necessary to use IR0, ID0,... inside function block? Thanks. Best regards

Would any one help me on how to configure the Modbus plus proxy TCSEGDB23F4FA in transparent mode in order to read M340 PLC registers  to SCADA , via the Modbus plus proxy TCSEGDB23F4FA? I have set up the proxy to communicate with the M340 PLC and gave a Modbus plus node address to communicate to Modbus plus network but the Adroit SCADA device driver still not healthy in order to display the registers status on SCADA. M340 MB+ Proxy Module.pdf

Dear colleagues, is it possible to operate two working Modbus units on one PLC (FX3u)? For example, one as serial Master with FX3U-485ADP-MB and another TCP Server with FX3u-ENET-p502?    

Hey Guys,i'm working on implementing the master side of a custom serial master-slave protocol between a B&R PLC and an electronic card.As part of the data i'm sending and receiving is used to close various loops(e.g. cascaded temperature control where the temperature sensors and actuators are connected to the electronic card) , but other data is not as usefull (e.g. various data used for display or at specific times), i believe i will also need to implement some sort of priority mechanism.my first question is - based on your experience - how would the general master side SW architecture look like? (for example - the send side of mine is comprised of 3 tasks all running under the same cycle - lower level task in charge of opening the port, sending the data etc, a mid level task in charge of creating the packet based on command from upper level, giving commands to lower level and using status from it to continue and finally - an upper level task in charge of deciding which messages to send).my second question is - how would you implement the priority mechanism?thanks

Hello.   I have a question regarding NB series display. The comunication is made through RS232 / RS485 comunication. I would like to use NB display as MODBUS MASTER and SLAVE aplication. - Display would work as MADBUS-MOSTER to talk to plc controllers. (Working through COM2 - RS485) - Secondly, Display would work as MODBUS-SLAVE to talk with (SCADA). (Working – Registers LW, LB))   What I have trouble with, is: - I would like to change variable in the PLC - for example : Regime_PUMP (address: 0x0001). - Regime_PUMP variable should be settable from all three devices PLC <-> DISPLAY <-> SCADA So: - If I change Regime_PUMP through PLC it should refresh also on DISPLAY and SCADA. - If I change Regime_PUMP through DISPLAY it should refresh also on PLC and SCADA. - If I change Regime_PUMP through SCADA it should refresh also on DISPLAY and PLC.   Does anybody have an example for NB series of display to do this?   Best regards.

Dear Forum, I am working at a Gas Processing Plant which is running Emerson Delta Distributed Control System (DCS). The Control System is communicating with over 24 3rd party Packages in the field over Modbus TCP/IP using its VIM Module. We have implemented redundant communication with most of the packages so we have a primary switch and a secondary switch. We are facing a communication issue regarding an Over Head Compressor (using Rockwell Allen Bradley PLC) and Instrument Air Compressor by CAPS Australia running XE Controller (Dedicated Controller). The issue is that when the Over Head Compressor is plugged into the VIM Network (Network in which all 24 3rd Party Packages are plugged), the Instrument Air Compressor **stops communicating**. We can't even ping the compressor. At times the Instrument Air Compressor does reply but with TTL of over 30ms. When OVHD Compressor is plugged out, Instrument Air Compressor resumes communication. I have attached wire shark capture of the network with and without over head compressor. When the OVHD Compressor is plugged in, the capture shows heavy traffic being generated by its PLC (IP address 192.168.1.60). Another physical observation is that before the OVHD Compressor is plugged in the VIM Network, the NTRON Switch (Ethernet Switch) in OVHD Compressor panel shows static lights, unlike lights of a normal healthy network. When the OVHD Compressor is plugged into the VIM Network, all the lights of switches in VIM Network which were blinking previously also become static. Do the static lights mean that the network is being choked due to heavy traffic? Below are links for the Capture, IP Scheme and Architecture of Over Head Compressor. https://www.dropbox.com/sh/ar7ss8zzoo96g37/AAADguRpUDtdOnmN3xQX-Wlpa?dl=0 Please also note that OVHD Compressor is using following IPs 192.168.1.59  PLC (Internal PLC IP) 192.168.1.60  PLC (Internal PLC IP) 192.168.1.61  HMI (Internal PLC IP) 192.168.1.62  RedLion device for DCS Communication I would really appreciate if anyone would help me trouble shoot this issue.     

The following is a post that was recently done. I thought that I would share... We will program a sequencer controlling seven cylinders that can be taught. The cylinders can be operator programmed from the AdvancedHMI screen. You will be able to select what cylinders to activate at each step and program in 500 steps. Our PLC will be the Do-More from Automation Direct. We will be using AdvancedHMI to communicate Modbus TCP to the Automation Direct Do-More Designer Software Simulator.  The following is the sequence of operation: Watch on YouTube: https://www.youtube.com/watch?v=In_W5SyWWBU The following is the explaination of the code: Watch on YouTube: https://www.youtube.com/watch?v=n63sXqUkjN8 To see the set by set development and the code visit our website. http://accautomation.ca/building-a-plc-program-that-you-can-be-proud-of-part-6/ Let me know what you think. Thank you, Garry http://www.accautomation.ca

in Citect i use the following function to associate various Tags with the next popup window, in the previous versions the tags passed to the trend fine since upgrading to 7.4 the trend pens dont display but all the values display fine.  FUNCTION // function AssPIDPopup // Expand a full set of PID tags and open // the PID block supergenie AssPIDPopUp(STRING sSGenie,STRING sBasePIDTag)     AssVarTags(-2,0,sBasePIDTag + "_PV");      AssVarTags(-2,1,sBasePIDTag + "_SP");      AssVarTags(-2,2,sBasePIDTag + "_OP");      AssVarTags(-2,3,sBasePIDTag + "_MAN");      // Now the tags for the PID tuning SG     AssVarTags(-2,4,sBasePIDTag + "_KP");      AssVarTags(-2,5,sBasePIDTag + "_KI");      AssVarTags(-2,6,sBasePIDTag + "_KD");      AssPopUp(sSGenie);      END I added a button to run the following code FUNCTION Loadtrend()     TrnSetPen(19, 1,  AssInfoEx(1,0));     TrnSetPen(19, 2,  AssInfoEx(2,0));     TrnSetPen(19, 3,  AssInfoEx(3,0));     Prompt("Test");      END     when clicked the pens set to the trend fine, i tried to run the code from a function but it did not work. i am new to citect and am sure i am missing something stupid.

There are a lot of instructions in function block that are missing the enable input that is present when programming in ladder logic, such as  ADD or MOV.  It seems to be very limiting. The only way around it that I know of is to write your own function block in ladder logic or statement list and use that. I seems rather limiting of a language if it relies on other languages for it to be usable. Does anyone know why the enable bit was left out in many function blocks when it is so useful in ladder logic? Pat

I'm having trouble with some very basic programming using function blocks. Specifically Connect Components FB programming, but I think it is a general, common application. Using ladder logic, it is easy to set a value based on the status of a bit. If the bit is false, move a zero into the variable. If the bit is true, move and 88.0 into the value. This relies on the enable bit of the mov instruction in ladder logic. Many function block instructions do not have enable bits. How would I change the value of a variable based on the status of a bit using function block programming? A real world example: You have a two position selector switch. If it is turned to the left, the drive runs at 0 Hz. (off) if it is to the right, it runs at 88.0 Hz. Or if you have a 4 position selector and want to select between 4 speeds. This should be a simple task, right? I've called the tech connect support line a few times and sent them a few emails and they haven't been able to figure it out. This is such a basic task. Thanks, Pat

Dear colleagues, is it possible to operate two working Modbus units on one PLC (FX3u)? For example, one as serial Master with FX3U-485ADP-MB and another TCP Server with FX3u-ENET-p502?    

Deploying An AdvancedHMI Project Here is our latest post on deploying an AdvancedHMI project on the industrial floor. Here are a few thing we cover: Hardware - Fanless Computer - Monitor - USP - uninterrruptable power supply Software - Turn Off windows update - Security - Set permissions - Limit internet use - AdvancedHMI - remove ControlBox, Miximize Screen Size, Topmost property Here is part of the post... Deploying an AdvancedHMI project on the industrial floor sounds like an easy task, but there are a few things that you should consider. The HMI (Human Machine Interface) user interface will run on a computer. The industrial environment is one in which temperature, dust, electrical noise, etc. are always present. This can also be combined with workers wanting to play with the new computer. We will look briefly at the hardware and software items that will make your install more reliable and user friendly in the field. Read the rest of the post... Let me know what you think. Thank you, Garry www.accautomation.ca

Hello there. I have connected wireless module (master) to Vijeo Citect 7.4 using RS-485 to USB converter. My slave modules are supplied power from gird/generator and the master module is supplies from a UPS.    I'm reading Modbus registers of slaves modules data via wireless master. Every time we have a power failure from grid, I get #BAD from all slave addresses. The generator kicks off within 30 sec. That is the slaves are off for 30 sec. Even after the slaves are powered on, SCADA does not poll data from it until I restart the SCADA.    My current MODBUS parameters are:   Inittype = 3, TimeOut = 3000, WatchTime = 10, Retry = 2. Could you please assist me on which parameters to change in .ini so that SCADA reads Modbus registers of slave for more than 30 sec.   I tried increasing TimeOut to 30000 but it couldn't solve the problem. I would appreciate if some one could help me out.   Thanak you in advance.      

Here is a recent post that I would like to share. Using Visual Basic 2015 we will log three holding registers from the PLC along with time and date into a Microsoft Access Database. We will log every minute into the database with the information that we collect from the PLC via Modbus TCP (Ethernet). All code will be done and shown so you can implement this in your application with different parameters. The information collected in the database can then be distributed or analyzed in the future. Visual Basic 2015 will be used with the EasyModbusTCP client/server library for .net. We will communicate to an Automation Direct – Do-More PLC. Using the free simulation software of the PLC Designer Software, we will retrieve three values of the Modbus Holding Registers using Modbus TCP. Once we have this information out of the programmable logic controller it will be placed in a Microsoft Access (2010) Database. This will be done by using a SQL command to insert the data. Read the rest of the post... Let me know what you think, Thank you Garry http://accautomation.ca/