Search the Community

Showing results for tags 'Clock'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 8 results

  1. Hello         I'm new for PLC, I need to set pump turn ON/OFF  in 4 time/day every day => [8:00-8:10]a.m, [11:00-11:20]a.m, [2:00-2:10-14:10[p.m, [5:00-5:20]p.m ** I have Omron PLC CP1E-N30 , Could you advise me, please ?  
  2. Micro 830 RTC programming

    Hi all,  Can someone please help me, I am using a Micro830 Controller running connected components workbench software to program the controller. I want the use the Real Time Clock of the controller to control an output to turn on everyday at 01:30am and turn of when it receives a signal from an input. The output will control a backwash valve that will operate and activate a cam switch internally that sends a signal back to the Controller to say the valve has operated and can now stop sending the signal to the valve. (if that makes sense). I have tried playing around with the RTC instructions but I cannot seem to get it to operate how I want it to. Any help would be much appreciated. EnvrioService
  3. siemens 1212C PLC

    All, I have bought a new siemens PLC 1212C. connected to TIA V13 software working perfect. When i use the clock memory byte, and selecting the 1sec bit M255.5 it is not counting. Why this is not working? What do i wrong? grtz Frans  
  4. ML1500 RTC

      Dear, I need some help with an application in ml1500 with the RTC . I need an exit is enabled by days of the week . I´m programming in Rslogix500. Program follows the image. If possible help me. Thanks Daniel.
  5. Version 1.0.0

    26 downloads

    Updated Clock logic and HMI screen simple and well documented. To use this, 'Import' this 'Toolchest' Drawer file into your PMC's Toolchest. Then 'Copy' one of the Ladder Blocks into your 90-30 or PAC Rx3i Target by holding down the Ctrl key while drag-n-dropping it onto the 'Program Blocks' in the Navigator window. The QuickPanel Screen along with the 'Indexed Message Grid'  can similarly be brought into your QP or QP+ Target. If there is already variables in your project you may need to adjust some or all of those used here. The logic here also will help you to understand the Array_Move Function blocks in PME.
  6. Clock_S90_PAC_QP+.zdrw View File Updated Clock logic and HMI screen simple and well documented. To use this, 'Import' this 'Toolchest' Drawer file into your PMC's Toolchest. Then 'Copy' one of the Ladder Blocks into your 90-30 or PAC Rx3i Target by holding down the Ctrl key while drag-n-dropping it onto the 'Program Blocks' in the Navigator window. The QuickPanel Screen along with the 'Indexed Message Grid'  can similarly be brought into your QP or QP+ Target. If there is already variables in your project you may need to adjust some or all of those used here. The logic here also will help you to understand the Array_Move Function blocks in PME. Submitter RussB Submitted 01/05/16 Category PLC Sample Code
  7. Hiya Guys, New here (first post!) - and I'm fairly new to Connected Components Workbench, so apologies for the mammoth post! I am currently developing a System using one Micro850 PLC and one PanelView C600 HMI. I am able to update the current HMI time by sending Unsigned-Integers to Global Connection Tags: System Clock – Hour ($SysClockHour);System Clock – Minute ($SysClockMinute);System Clock – Second ($SysClockSecond);However, if using the same “update time” more than once, this method does not work as the HMI is looking for a “change” in a Tag before an update occurs (Tag-specific). For example, we require to be able to receive a “synchronisation signal” on a digital-input on the PLC each day at 15:00:00. This will only work once as, even though the HMI’s current time updates every second, I will still be sending the values “15”, “0”, and “0” to the above Tags (which will therefore not force an update – as they haven’t changed). I cannot reset these Tags without updating the current Time – as any number “out of range” causes an error (incidentally the errors are shown on the HMI to occur on Tags “SysClockSecondTimed”, “SysClockMinuteTimed”, and “SysClockHour” – note the omission of the word “Timed” on the Hours error…). There appears to be no reference to these “Timed” Tags anywhere in CCW, and I have no idea why the “Hour” update errors on a different (the correct?!) Tag. It’s a pretty confusing problem and difficult to explain… it took me a while to get my head around it – and I can see what the code is doing! J I've looked for documentation on how these Global Connection Tags work, but I can't find anything. Everything I (think I) know so far is from extensive testing... so if anyone knows of any documentation, or has any suggestions as to how I can achieve the required result - that would be massively helpful! Thanks for taking the time to read all this! Cheers, Steve.
  8. Hey guys, sorry for all of the newbie questions, I had 1-2 years of PLC training at a tech school, and then I got a job where I didn't use my knowledge at all for 2 years, and now my current job is all PLCs, and I have forgotten some of the stuff I learned, but it's coming back to me, so I appreciate all the help with the stupid questions. Anyways, here is my question. I am using a MicroLogix 1100 running RSLogix 500 to collect data on a few of our machines about scrap parts and run time vs down time. I just have some basic inputs hooked up to it. I need to be able to send the data to an integer file at the end of every shift, and then reset the current data (easy enough for me, at a certain time I will use a MOV function to move the info from the timers and counters to integers and then use a RES function to reset everything that I want). Anyways, my question is how to I tap into the free running clock built into the MicroLogix 1100? I see that it is S2:4, but I am confused how to use it or set it. I just set one up on a SLC 5/05 and that was super easy, I just set the time while it was online, and then used 3 different COMPARE functions to tell it when I wanted to move/reset the data (I used S:40, S:41 and S:42). Anyways, I can't seem to figure out how to tap into this clock on the MicroLogix 1100. Can anyone help me with a "dumbed down" step-by-step guide. I just want data sent at 6:30, 14:30 and 22:30 and then data reset 2 seconds after each of those times. Any help is truly and honestly appreciated and very useful. Thank you in advanced. Howard