Search the Community

Showing results for tags 'servo driver'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 163 results

  1. widadi

    widadi posted a topic in Mitsubishi

    does anyone can help how to connect plc fx2n-16mt with servo drive mr-j2s-40 and motor servo hc-kfs-43 ? please give me wiring schematic thanks a lot

  2. USB Driver

    Joseph Radiant posted a topic in Mitsubishi

    Dear all, looking for all your help. I want to read program from PLC. I use PLC Mitsubishi FX3U-128 M connect with GOT GS2107-WTBD. I cant connect with usb communication because i cant found the usb drivers. Can you help me ? Please
  3. Hi guys, been using this site for a long time, it has come in handy alot. However I have recently taken on my first servo project, heres an overview of the project We have a filling machine that has a separate dosing system to the filler head. It used to keep the dosing in time by adjusting a 0-10v signal to an inverter to make sure that a flag makes a sensor in a set window. I have installed an encoder on the filling head and an mpl servo to the dosing. I have then used an MAPC instruction to follow the encoder, the cam is 0-360 and it follows a straight linear line. I have installed of this as a temporary set up on one of the filling machines (we have 2) and it is working perfectly. I have now installed this on the second machine as a permanent set up with a panelview plus 7, L71 cpu. However it is giving a very strange problem on first power up, the encoder is giving the exact same position as before it was powered down. however as soon as the MAPC executes the servo axis  faults, giving an overspeed fault. the servo doesnt even look like its attempting to move (however it is through a 10-1 gearbox). if i then home the encoder it then runs absolutely perfectly until it is powered down again. I am beginning to think it may be to do with the master lock and cam lock position, as the cycle stop position of the two machines are different. however I just cant seem to get my head around i the difference between them.   Hopefully that makes sense any help would be greatly appreciated Thanks Rhys   c1_dosing.ACD

  4. Kinetix 6500

    ranasingheum posted a topic in Allen Bradley / Rockwell Automation

    Hello All, I'm completely new to the motion control systems and I'm interested in learning servo programming and motion control. I was trying to find a good resource that I can start learning from A-Z, but I couldn't find any. I have a demo kit with compactlogix processor and two kinetix 6500 drives with servo motors. What is the best way to learn it. If you guys have any resources or basic sample program please help me. Any learning material would be helpful. Thank You All

  5. Error on Mitsubishi Servo Pak

    Tony P posted a topic in Mitsubishi

    I have a Mitsubishi servo Pak #MR-J3-40B with an error 25 and 95 flashing. Could not find any help on the web or in the manual. Any help appreciated.

  6. Position Controller

    Fx.liranzo posted a topic in Mitsubishi

    hi, im student im trying to make a position control with the misubishi serie of servos, i have 2 mr-j2s-20a and 1 fx2n-20gm i was reading the manual i didnt readed all yet, i wat to know if i can control the position with a fx2n plc and if someone can send me a example of a code using it. thx for your attention 

  7. Version 1.0.0

    10 downloads

    The OMNI Flow Computer driver provides the ability to communicate with the OMNI 3000 and 6000 family of flow computers. It supports both real-time communications and Electronic Flow Measurement (EFM) for historical data. For real-time only communications, the OMNI Flow Computer driver can be purchased individually or as part of theOil and Gas Suite. For applications requiring EFM and real-time communications, the OMNI Flow Computer driver can be purchased as part of the EFM Suite. EFM capabilities include scheduling and exporting EFM History, Alarms, and Events data to industry standard and custom formats. Features - OMNI.Net Client (Master) for communication with OMNI Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) - Supports all OMNI devices which uses flavor of OMNI Protocol. - Supports 1,3,5,7,9,11,13,15,17 memory types - Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. - Performance - 500mhz Pentium - 10 words: 15msecs - 100 words: 35msecs (avg) - Full implementation of Class 0 and Class 1 OMNI protocol functions as well as a subset of the most commonly used Class 2 functions  This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  8. Omni Flow Computer Driver for HMI/SCADA View File The OMNI Flow Computer driver provides the ability to communicate with the OMNI 3000 and 6000 family of flow computers. It supports both real-time communications and Electronic Flow Measurement (EFM) for historical data. For real-time only communications, the OMNI Flow Computer driver can be purchased individually or as part of theOil and Gas Suite. For applications requiring EFM and real-time communications, the OMNI Flow Computer driver can be purchased as part of the EFM Suite. EFM capabilities include scheduling and exporting EFM History, Alarms, and Events data to industry standard and custom formats. Features - OMNI.Net Client (Master) for communication with OMNI Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) - Supports all OMNI devices which uses flavor of OMNI Protocol. - Supports 1,3,5,7,9,11,13,15,17 memory types - Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. - Performance - 500mhz Pentium - 10 words: 15msecs - 100 words: 35msecs (avg) - Full implementation of Class 0 and Class 1 OMNI protocol functions as well as a subset of the most commonly used Class 2 functions  This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  9. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  10. Version 1.0.0

    7 downloads

    FEATURES                                                                  - Client driver for  Emerson Process (old Bristol Babcock) gas and liquid flow computers& controllers, supporting BSAP protocol. Includes series 3000 &Controlwave systems. -Both IP & Serial port connections supported. - Supports reading and writing signal tags by name and address, including retrieval by match function. - Reading archive and audit trail data. - Reading and writing to analog and digital arrays. - Transactions configured via strongly typed transaction objects. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  11. Emerson Bristol BSAP Driver for HMI/SCADA View File FEATURES                                                                  - Client driver for  Emerson Process (old Bristol Babcock) gas and liquid flow computers& controllers, supporting BSAP protocol. Includes series 3000 &Controlwave systems. -Both IP & Serial port connections supported. - Supports reading and writing signal tags by name and address, including retrieval by match function. - Reading archive and audit trail data. - Reading and writing to analog and digital arrays. - Transactions configured via strongly typed transaction objects. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  12. Version 1.0.0

    1 download

    With ParTSCComm driver you can communicate via serial or Ethernet with Thompson Scale Checkweigher Systems Models 4693 and TSC-350, emulating the Stat Pak-PC Data Exchanges. Features Customer_Name Product_Desc High_Reject_Limit High_Pass_Limit Target_Weight Low_Pass_Limit Low_Reject_Limit Container_Weight Weight_Unit Save_Product_Number Run_Product_Number Product_Listing_On Product_Listing_Off Print_Interim_Report Print_Final_Report Print_Product_SetUp_Listing Clear_Stat_Buffer This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  13. View File Thompson Scale 4693, TSC350 Driver for HMI/SCADA With ParTSCComm driver you can communicate via serial or Ethernet with Thompson Scale Checkweigher Systems Models 4693 and TSC-350, emulating the Stat Pak-PC Data Exchanges. Features Customer_Name Product_Desc High_Reject_Limit High_Pass_Limit Target_Weight Low_Pass_Limit Low_Reject_Limit Container_Weight Weight_Unit Save_Product_Number Run_Product_Number Product_Listing_On Product_Listing_Off Print_Interim_Report Print_Final_Report Print_Product_SetUp_Listing Clear_Stat_Buffer This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  14. Version 1.0.0

    2 downloads

    Features Client driver for CTI2572 Ethernet adapter for 2500 series CTI controllers or 500 or 505 series Siemens SimaticPLCs (old Texas Instruments) via CTI E2572P-ECC1, E2572  or CP2572 module. - Read and write V and K memory, discrete inputs X and outputs Y, word inputs WX and outputs WY, control registers, timers, drums, and system status words. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  15. View File CTI E2572 for CTI 2500 or Simantic CP2572 Simantic 50x PLC Driver Features Client driver for CTI2572 Ethernet adapter for 2500 series CTI controllers or 500 or 505 series Siemens SimaticPLCs (old Texas Instruments) via CTI E2572P-ECC1, E2572  or CP2572 module. - Read and write V and K memory, discrete inputs X and outputs Y, word inputs WX and outputs WY, control registers, timers, drums, and system status words. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  16. Version 1.0.0

    15 downloads

    The ABB Totalflow driver connects to ABB Totalflow devices that support the native Totalflow serial protocol. The Totalflow protocol is typically used in upstream Oil & Gas for process control and hydrocarbon measurement at the wellhead, as well as in midstream Oil & Gas facilities. Its capabilities provide data to SCADA, HMI, and measurement applications. The ABB Totalflow driver also collects historical Electronic Flow Measurement (EFM) gas and liquid data to work in conjunction with the EFM Exporter. Features - Supports all TotalFlow devices which uses tci.dll ver. 305. - High-speed communication - Suitable for transferring medium-to-large data volumes - Routing capability (i.e. can be used in the WAN) - Package-oriented data transfer - Support following functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here      
  17. View File ABB TotalFlow .NET Driver for HMI/SCADA The ABB Totalflow driver connects to ABB Totalflow devices that support the native Totalflow serial protocol. The Totalflow protocol is typically used in upstream Oil & Gas for process control and hydrocarbon measurement at the wellhead, as well as in midstream Oil & Gas facilities. Its capabilities provide data to SCADA, HMI, and measurement applications. The ABB Totalflow driver also collects historical Electronic Flow Measurement (EFM) gas and liquid data to work in conjunction with the EFM Exporter. Features - Supports all TotalFlow devices which uses tci.dll ver. 305. - High-speed communication - Suitable for transferring medium-to-large data volumes - Routing capability (i.e. can be used in the WAN) - Package-oriented data transfer - Support following functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here       Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  18. IFIX Problem

    N_Locus posted a topic in GE

    I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks

  19. Version 1.0.0

    224 downloads

    The Allen-Bradley Ethernet Driver provides an easy and reliable way to connect Allen-Bradley Ethernet devices to Client applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports the Allen Bradley SLC 5/05 series, PLC-5 series, ControlLogix, CompactLogix, and MicroLogix PLCs. Features Interface: TCP/IP Ethernet Port, DHRIO, Net-ENI PLC Supported: AB Controllogix, Compactlogix, Micrologix,  SLC50x, PLC5, via TCP/IP Ethernet built-in or Module port. Any device with Ethernet/IP protocol.  Methods:  Open, Close, RefreshInfo, ClearDataBuffer Events:  OutCome (fires when a communication transaction completes) , RXComplete, TXComplete General: Also Supports unsolicited messages from SLC, Clogix family. Via DHRIO, access SLC & PLC5 data tables for read/write. Read or write most of the AB data types. support for DataQueue reads in SLC and Micrologix Throughput: Reads 100 consecutive registers @ 10Mhz in 40 msec. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
  20. View File Rockwell/Allen Bradley ethernet communication Protocol/driver The Allen-Bradley Ethernet Driver provides an easy and reliable way to connect Allen-Bradley Ethernet devices to Client applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports the Allen Bradley SLC 5/05 series, PLC-5 series, ControlLogix, CompactLogix, and MicroLogix PLCs. Features Interface: TCP/IP Ethernet Port, DHRIO, Net-ENI PLC Supported: AB Controllogix, Compactlogix, Micrologix,  SLC50x, PLC5, via TCP/IP Ethernet built-in or Module port. Any device with Ethernet/IP protocol.  Methods:  Open, Close, RefreshInfo, ClearDataBuffer Events:  OutCome (fires when a communication transaction completes) , RXComplete, TXComplete General: Also Supports unsolicited messages from SLC, Clogix family. Via DHRIO, access SLC & PLC5 data tables for read/write. Read or write most of the AB data types. support for DataQueue reads in SLC and Micrologix Throughput: Reads 100 consecutive registers @ 10Mhz in 40 msec. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here Submitter Scadadoctor Submitted 02/28/16 Category Demo Software

  21. Beginners Servo Help Required.

    aldridgen posted a topic in CX-Programmer

    I have been programming Omron plc's for a while but have not used any servo drives. I have customer who is free issuing the following equipment for a project he wants programmed.: cj1m cpu21, r88d-gt04h, r88d-gt08h, r88m-g40030h, r88m-g7503h-s2. The small drive is connected to a simple ball screw moving a stop. The second drive is connected through a gear box and chain drive full details not known to date.  I have read the cj1 manuals and will be generally using  pls2 commands for the position movements.  Are the drives plug and play? If I connect the drives leaving the parameters as out of the box defaults should the drives operate using the pls2 command. In this condition I assume it is 10000 pulses per rev of motor. I can scale positions with maths in Plc and send the required pulses. Any guidance appreciated to confirm I am on the write track. I assume I could also use the electronic gearing parameters. Any examples using 5mm ball screw!    

  22. Q172CPUN and MR-J2M to control position

    nguyenthucuc posted a topic in Mitsubishi

    Hello Dears, I am studying to control position via Mitsubishi device Now, I have Q172 CPUN and MR-J2M(MelServo) to control position. But, I didn't find manual that explain command and parameter to do it and it has the example to do it. who have experience to control position, pls help me to overview it. Thanks so much!
  23. Hi All. Just got an AB Micro 850 + the PanelView 800 HMi 4", for testing. The problem I encounter is my Windows can't find the USB driver for the HMI. I have no problems with the Micro 850. I have tried it on a few different computers, all with windows 7. What to do ?
  24. Hi... i want to ask about QD75D4, how to change rotation direction in positiont data ? If position data number 1 is CCW and position data number 2 is CW.   I try give value 100 (hope run CCW) and -100 (hope run CW) on posiition length but not respond.   Parameter axis #1 Control system = 2:INC linear axis   Any setting mistakes ?   Thank you
  25. Please suggest me about these issues: Issue: No Rotation 1.     The motor links are slack or release. 2.     Distant issue is stuck in the glide. 3.     The motor load is extreme. 4.     The bearing are shabby. Issue: Overheating 1.     The rotor is in part demagnetizing cause extreme motor present. 2.     Motor voltage is exceeding the highest value. 3.     The duty cycle is extreme.