Search the Community

Showing results for tags 'create new project in simatic manager in hindi/urdu'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 44 results

  1. Hi, Is it possible to have two hardware configurations which can be switched through HMI. currently i have two hardware configurations and the project remains same. So without connecting with Simatic Manager i want to switch the hardware configuration. 
  2. Totalizer for 15 mins

    Please help me how develop totalizer for every 15 mins , for real value. Real value should   be taken sample  for 1Sec.
  3. Siemens Field PG M3 - PLC Programming Rugged Laptop for Sale   Condition is Used   This is a Siemens Field PG for PLC Programming.   Purchased several years ago as part of an auction lot and has sat in my workshop since, I don't do much Siemens so this is up for sale - This is what I know about it :-   The machine has Windows 8.1 Pro 64 bit installed (Machine has Windows 7 Ultimate on the base but been upgraded at some point) 8GB ram installed It has a windows XP VM installed which runs the Siemens Programming software (Virtual Box) There is a folder on the desktop containing the original installation files, so would be easy to return back to the host machine if required. All software appears to be licensed (see pics)    Has Step 7 and Step 5 installed   Negatives - Missing the back flap & Battery not being recognised thus not taking on charge (I think this is a just BIOS update needed but not looked into it too much)   In very good overall condition, a few light marks but that's about it, still looks very good.   Comes with the original branded rucksack    This was a really expensive bit of kit in its day and still stands up as an excellent PLC programming machine   Open to sensible offers - I am located in the UK so worldwide postage will have to be calculated seperately   I have powered it up and it works well with no issues found, the PLC software all seems to work and appears fully licensed but as I am not the original owner and don't know the provenance of the machine or licenses this machine is sold with no returns or warranty provided.
  4. Siemens Simatic S7-1200 component selection

    Hi,  I am designing measurement devices and i intend to use Simatic S7-1200 as PLC for my new device. The problem is, my background is nothing close the electric and I am having quite a lot troubles when it comes to select components, I do not know how can I select components that are compatible with the PLC i am going to use.  Pressure sensor, humidity sensor shall be selected and which parameters I should be careful about? I read somewhere 24VDC supply voltage is needed. Is it needed even the device has digital output or is it for analog output only? How do I make sure about the communication interface? For some devices it says I2C, is that compatible with S7-1200? or do i need a special communication module for each component? Then it will be super expensive.  I would appreciate any answer. 
  5. TIA Portal for beginners

    If you learn more quickly after watching videos about PLC like reading the literature without example, then these videos can help you if you are a complete beginner. Enjoy it  (If this is against the rules of this site then sorry for spam  )   PLC:   1. How to create project in TIA Portal   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgUBs7nrNmq5ManYyQ-hvKK       2. Program blocks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlni7Uw9-lfs8UIykpuubF       3. Bit logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbitdaKvFJv9WZEOj7VrMf_0       4. Timer operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbiaWQL8lXja1_Kd1z-jeDXr       5. Counter operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgfyg2dwDiR7xzsaXtdI9xo       6. Comparator operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgs-WgOvePyRUKgnDBK-qfx       7. Math operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgInRxxraaX6RG5LUS8gcpM       8. Move operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjQQEXr_bhzjKvNCjBeS1Zw       9. Conversion operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsjfMUtVn3QQ6MJM7cBpTW       10. Program control operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgFtnxDkNZ7Amps67nr-KHX       11. Word logic operations   https://www.youtube.com/playlist?list=PLqYtPgi-xbbh6bGa9bgy6cJhVi-RhF0gH       12. Shift and rotate instructions   https://www.youtube.com/playlist?list=PLqYtPgi-xbbhlUnK9ECCKUccqt91Qsw6e   HMI:   1.       Beginning with HMI devices   https://youtu.be/EF4Qprf0Mn8   2.       Basic work with screens   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgPAApJCAGcPZOHViTAT9C1   3.       Basic screen objects           4.    Elements objects   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgOSznFb03Rr_St-2WFcygo         5.       HMI Alarms   https://www.youtube.com/playlist?list=PLqYtPgi-xbbi_V7XENgupV7HFjOJI7Yes   6.       User administration   https://www.youtube.com/playlist?list=PLqYtPgi-xbbgDP9dfAOkW3eodC5aH0kmR         7.       Scheduled tasks   https://www.youtube.com/playlist?list=PLqYtPgi-xbbjsaMlovHL2BDrju8kKgkZi     OTHER: Siemens PLC - Hardware configuration (SIMATIC S7-300) https://youtu.be/WVkAGKsxftw     Siemens HMI/PLC - communication (Basic Example) https://youtu.be/AcN50TShHgY   Siemens PLC - Firmware upgrade/downgrade via TIA Portal https://youtu.be/qEsS7RR7QIw   Siemens HMI/PLC - Recipes (Basic Example 1/2) https://youtu.be/wLmH-QT3T9U   Siemens HMI/PLC - Recipes (Basic Example 2/2) https://youtu.be/_2K6l7dYuqY   Siemens PLC - Upload program from PLC to TIA portal (PC) https://youtu.be/igw-4CxjnLw   Siemens PLC - Add and install GSD file in TIA Portal https://youtu.be/LJKUzv3Zykw   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 1/2) https://youtu.be/WCpiej4S8-U   Siemens PLC - Activate and work with Web Server in TIA Portal (Part 2/2) https://youtu.be/xl4pxLK0CDY   Siemens PLC - Scaling/Converting Analog Input/Output (0-20mA to 4-20mA and vice versa) https://youtu.be/BOjFlhAwO0k   Siemens HMI/PLC - Linear scaling of HMI Tag (PLC/HMI tag scaling) https://youtu.be/XBUknb3JDfE   Siemens HMI - Changing of Date/Time format (12/24 hours format) https://youtu.be/bCVKFrLwzWA   Siemens PLC - Configuring and commissioning of SIRIUS ACT (PROFINET IO) https://youtu.be/yIW6kta34_s   and more...      
  6. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  7. Hi everyone! I have a question to all of you guys - do you ever use any software or online tools to manage your automation/electrical engineering projects? I have worked in a number of companies and have seen various scenarios, from using excel tables to run multi-million dollar projects to using proprietary SW for every little tiny project. Unfortunately I do not have experience working for any major big integrator and am very curious how projects are managed at this level (and if every engineer likes the way it is handled).  Additional question - does anyone have ever used a software to automatically generate the PLC code? I know some companies develop products to generate the "skeleton" of PLC program and I think it is a great thing to have.
  8. hello everyone.Please help.I have a program for the machine written on protool and Strp7, When I want to open it to add changes to it, it gives me the erroropen object 734:26 OM TD/OP: simatic-op is on a write-protected medium.please tell me, How can I overcome this problem?"Unexpected file format" Attached images.Thank you for your help
  9. Hi Guys, who knows about the new Software FactoryTalk Network Manager? I am trying to get the connection with a stratix 5700 but no success. I think i do not know how to really configure the network Manager so that it sees the switch. Now just for the test i have a LAN cable from switch (any port) to the host PC where Network Manager is installed; the IP of the PC is in the same range like the switch. Any ideas? thank you
  10. GE ENET station manager

    HiI am just starting out at a new job full of GE systems.I have a IC695ETM001 ethernet card which has a RS232 port for Station manager access.I can currently see some info (such as IP, firmware version etc.) from the card when I connect with Putty and cycle the power but I cannot send commands to the card. I've tried Putty, hyper-terminal and a standalone Station manager terminal from GE but nothing works.Anyone know whether I'm missing something?
  11. Hello everyone, I have this message when I trying to open my project which I did.  "The project includes a model that cannot be used with the current license. The project is closed." I recently reinstalled windows, but version of Sysmac Studio is same, License is same, but now I not be able to open my project. I just tried to install last version of Sysmac Studio 1.25, and of course nothing changed, looks like issue with license. But again, license is same.
  12. Melsoft Series GX Develop Error

    Good day everyone.  Somebody can help me to to resolve the issues in our PLC. I am not a PLC engineer, your help will be highly appreciated. It is showing - Failed to open the Project file.  Possible causes: 1.The data in the project file is completely damaged; 2.The data is created by new version more than this S/W; 3.The project file does not exist. Hopefully, somebody can help me or give instruction on how to check those possible causes.   Thank you.
  13. Hi all,  At my work, we are unfortunately still using GX IEC Developer 7.04. All of a sudden I can no longer open any project at all with my GX IEC Developer. I can start the program just fine, but as soon as I choose a project to open I get "cannot initialize communication manager". And after this, I get another 2 "cannot restore parameter file. param.tmp not found" and "cannot restore transfer setup file! cnct.tmp not found!". Doesn't matter which project. And I have opened these earlier with no problem for years. I have tried reinstalling ALL Mitsubishi software on my PC. And restarting PC. I can't find a link to any other changes I have done on my PC either... Does anyone have any idea how to solve this? Best
  14. Gt designer2

    Good day everyone, i would like to ask for help in GT designer 2, i have an error of "font manager Error" when i run the program and i am using it to access F940GOT an old model of HMI, if there is another program that i can access F940GOT then can you kindly give me a link. thank you in advance  
  15. I have a configured and working FT Transaction Manager, but the computer it’s installed on needs to be replaced and now I'm trying to install FTTM on different computer. I’m trying to complete the configuration "checklist", but when I get to the "Define Data Points" step, there are no applications in the "Select an Application" pop up window. What's wrong? I'm new to all of this...
  16. Anyone with knowledge of a VBA Run-time error '4205'  Can't find the project database! VBA stops at gTagDb.GetTag  Here are some things I already tried.  Cleared the CACHE files in the project.  Deleted .CAC file in TAG folder,  Removed Watcom SQL 4.0 from ODBC User DSN.  Uninstall and Re-install RSView32 Works 7.50 and then upgraded to 7.60.  
  17. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  18. Hello everyone! I am new to Eplan, and I am working on a big project on which someone else has worked on before me and almost finished it, but with a lot of technical mistakes and missing peaces. My boss expects me to fix a lot of things, but I have no experience with this software, so I could use some help. The problem is that no revision information (revision date, description, approved by etc) is displayed in this project, and I don't know how to make it appear, and be correct. I have made changes in plot frame and added special texts which should display these data, but I don't know where should I define wanted information (for example, I put special text for "approved by" but I can't seem to find adequate place to write the name of that person)? And, is there a way for Eplan to generate automatically revision description, based on the changes I made? From all said, it is obvious that I have no idea at all how revisions work, so any help would be enormously appreciated Thank you in advance! Cheers
  19. ab

    The HMI server in area 'RNA://$Local/Spring_Insertion' refused to load it's project. The HMI server is not licened and cannot open a project with more than 5 displays
  20. Hello, I need to make an ethernet communication Siemens S7-300 <> Omron G9SP. The HW of the Siemens that i us are CPU 315 2DP and CP 343-1 Lean. I did try to follow the Omron manuals Z922 and Z924, but faced with some problems. First of all in Z924 there is no complete HW configuration of Siemens (communication configuration is missing). Also, formats of messages differ in both manuals. Maybe there is an Simatic Step 7 project example, that i could open with Simatic Step 7 manager to do a deeper investigation, or maybe somebody has a lot more experience in this case? Thank you in advance.   WBR @rturas
  21. Hi all, some one can help me with a restore on Rockwell Factory Talk Transaction Manager? FTTM V10.10, run at Win7 64, Solidcore installed and run. When I try to do an application restore, the FTTM give a error shown in the photo. Error: Configuration data files are already present in the path. Sorry, I am forced to erase the real names of files and replace them. Thank you BBB
  22. Simatic S7-200 Software?

    Hey there Seimens experts,   I have a few little S7-200s and need to backup the program on them.   What software and cable do I need.   I also have  a few Micromaster 440s that I can back up too if the cable and software is not to much dollars.    Thanks in advance,   
  23. I am currently trying to set up an IM308c Profibus DP Module to use with an S5-135U system using two 928B processors in Multiprocessing mode. Module will only be accessed by one CPU and the slave is an ET200M (IM153-1). I am testing it along with the Standard Function block  FB192. When I execute to write outputs(WO) I get an error. The error is a value of 4 and in the ET200M Manual states "Incorrect Mode" (page 7-15) The remedy is switch the master to run. It is already in run with a green run light on. Does this card require synchronization like Sinec L2?  PLC does not see it in run apparently and I have no other info.
  24. Hi, this is my problem, I created an app on FT Administration Console, in fact, one for network and one for local, I changed the connection to local on Log On FT, but, when I try to define the data points on Step 3 of configuration checklist, only shows me the network app, i select the app, after click OK, the FTTM freezes, anything else happens, I don´t know what am I doing wrong.  
  25. Folder in FactoryTalk View Studio

    Hallo my Allen Bradley friends, is there any way to create a folder in FactoryTalk View Studio? I mean at Graphics/Displays. The clarity of a bigger projekt is affected by that.     Mit freundlichen Grüßen, Best regards   Adrian Düringer