Endless Timer

[seroke 0]

Hi all ,

I'm new on Mitsubishi , so i've some problems.
I need to write an endless timer.

*I have to use just 1 timer.
*If click start; 
   -1s later 1st lamp
   -2s later 2nd lamp (together)
   -3s later 3st lamp (together)
   -4s later 4th lamp will be on.
   -5s later they will be off.
   -6s later it will start again from first step.

Please help me...   

[pturmel 160]

Sounds like a classroom assignment?

[Ron_S 61]

Show us how far you have got and we will gladly assist you.

A tip: If timer = 1 then ?

[seroke 0]

22 hours ago, Ron_S said:

Show us how far you have got and we will gladly assist you.

A tip: If timer = 1 then ?

if timer = 1 ..start lamp1
timer = 2 ..start lamp2
timer = 3 ..start lamp3
timer = 4 ..start lamp4
timer = 5 ..reset all..
.this part works. but it should restart and be endless..

[DaMro 2]

try to put timer NC contacts just before timer. 

So when timer reach 5 sec. it will reset by itself, and starts to count again

[Yuto24 2]

Also you can use a coil when the 5th timer is activated to have an interlock to m25 an reset the sequence, then an NC to cut the energy of the ladder

[seroke 0]

Thanks