PLC expansion for 3G3MV inverter

[CX_Luigi 1]

while evaluating a project requiring simple positioning of a trolley i found references in Omron site to this product, 3G3MV-P10CDT(3)-E, basically a PLC card expansion for a 3G3MV inverter. It seems no documentation is available yet, guess it's just a newly introduced product, can someone point me to places where i can find more info, or better else if you already had the chance to use it, share your experience? thanks

[Yair 2]

Please Try those tow pdf file 3G3MV_P10CDT_Instruction_Sheet.zip

[Yair 2]

This one I01E_EN_01_3G3MV_P10CDT_manual.zip

[CX_Luigi 1]

Thanks Yair for your help

[nguyenthucuc 2]

who is expert about 3G3MV to help me, please? I set two parameter n003 = 2 and n004 = 6, then screen in 3G3Mv inverter display "CALL". (I'm wanting between PLC CP1L and 3G3MV ) I want to know how to do adjust to communite. Please, help me!

[PdL 71]

Check the pdf documents in these topics on Easy Modbus master: http://forums.mrplc.com/index.php?s=&s...ost&p=64402 http://forums.mrplc.com/index.php?s=&s...ost&p=64529 You will need to setup the CP1L port for Easy Modbus and you will need to set the appropriate serial settings in the 3G3MV regarding data format, baud rate and slave address. Even better, check this download from our respected member PMCR: http://forums.mrplc.com/index.php?s=&s...ost&p=79814

[nguyenthucuc 2]

I don't think so, because I set in PLC: sysway; 8,1,E,9600. Therefor, I think I set in inverter no truth. who can give me to advice about it? thanks a lot!

[PdL 71]

The inverter only supports Modbus. If by "sysway" you mean you set the port to Sysmac way, this will not work. Have you checked out the download program example by PMCR?

[nguyenthucuc 2]

Thanks a lot to every body. I controlled position with system that include CP1L-3G3MV by Rs485. Result that I received is good respond.