Search the Community

Showing results for tags 'user access'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 37 results

  1. Hello Everyone I am new on this forum. As an electrician in Denmark, I have just gotten a fountain to maintain. The control cabinet and pumps are all underground in a couple of wells.   There are a lot of monitoring and time is spend / wasted lifting the heavy manhole covers and driving to and from the wells. I would like to install a plc to monitor the few settings I really need. Are there some with experience of how and what type of equipment?  I am considering a siemens LOGO with a communications module and just buy a sim card.  Is it better to use prepaid 2G, 3G or 4G or only data sim card?  Also with or without pin code? It is not possible to establish a wired communication connection but the wells have of course 230 V mains and is very close to a phone tower. Yours faithfully Morten Lund
  2. Good morning experts, i have a little problem with a Alarm display (user) and i hope with your huge experience you will may help me. Thank you very much in advance  Let me explain best. I would like use a slider to control a Alarm display (user), i tried to do it, but the slider doesn't scroll up/ scroll down like i will want. It doesn't scrolling through the pages and it heighlights just some alarm. Could you give me a bit advice, please? 
  3. Hello, On our DCS we have a button that will open an RDP connection to our PLC server and open the .mer file connecting the DCS to the PanelView HMI. This is supposed to be used for troubleshooting purposes only, but that is not the case. Is there a way to prevent operators from operating the HMI through the RDP while still allowing them to have read only access?   Thanks, Michael
  4. Hello, denizens of Mr.PLC. I'm trying to talk to an old TSX17-20, and have acquired the DOS files for PL7 22. However, when installing via floppy drive, I'm getting a fatal error saying that the User Interface is missing. FATAL ERROR: 251 Your Telemecanique system in incomplete. Ensure that User Interface is correctly installed.   I'm aware that PL722 (and PL7-1/2/3, etc.) require Telemecanique's DOS User Interface to run, but I can't for the life of me find installation files, and, as it is no longer supported by Schneider, no luck getting it from their site. Apparently, it used to be hosted there. Would any of you wonderful folk have the links or files to this user interface? Apparently, PL7 22 5.0/5.1 have never required/no longer require a license. It was a drag to find these files, so I'm posting the PL722 files (in two zips, representing the two floppies) so that there's an easy to find reference for them. PL722D1.ZIP PL722D2.ZIP
  5. HMI user

    Hi! I would like to ask your help. I have a problem with an allen bradley touch panel. I would like to know which user is active. Like maintenance, administrator... Is there any dedicated tag to decide and  to convey it toward the plc (also ab). If there is none. Can anybody suggest an alternative solution ?  Thanks ahead in advance. 
  6. Simatic logon

    hello everyone I have a problem with Simatic logon..  in startup window i have some buttons that have authorization according to their work.. when i work with only user administrator every think is going according to me.. when i enable logon after that login was successful but when i click on button there is messages " not operator authorization " plz help me... wincc user administrator or Windows user name both are identical..
  7. Does anyone have any tips or tricks for generating UDT Templates from an excel spreadsheet? It says in the help files you can copy/paste from excel into the UDT Template, but it seems to only allow that cell by cell, instead of the whole table of data. This is painfully tedious when building larger interfaces. I've tried saving the spreadsheet in various formats (CSV, PRN, tab delimted txt) and I've tried various versions of RSLogix from 23 to 31. I can't seem to find any detailed info on how to do this. I've seen some other forum posts regarding using scripting to generate the XML to import the UDT, but I don't understand why I can't simply copy and paste the info in. Is this really that difficult? Any help would be greatly appreciated. Thanks Otto
  8. I have a Modicon NOM0200 unit connected to an access switch to send commands to various rs-232 devices. The Access switch requires a "disconnect string" to end communication with a particular port. The disconnect string is "CRTL+D", how can I send a "CRTL" keystroke from the NOM0200 unit? I know for carriage return it is "$R" is their a similar combination I can enter for "CTRL"?  
  9. Hallo.  Can someone shed some light on how much memory st takes ? does it use more that traditional ladder? i find that a routine with a couple of thousands of lines uses over 500kB is there any tricks to lower the usage? Or is it just what it is, and buy bigger cpu’s
  10. Good day to all, I am trying to establish DDE communication between my PLC (1769-L23ER) and MS Access via RSLinx Classic Gateway (3.9) over Windows Server 2012 R2.  On my developing PC (Windows 7), there isn't any issue at all. But when I port the codes over to Windows Server 2012 R2, MS Access is not able to establish DDE communications with the PLC.  I was wondering what went wrong. The error message from MS Access is "MS Access can't find the specified application and topic because it can't open the DDE channel, err.Number is 282. The code for getting the channel is as follow OpenRSLinx = Application.DDEInitiate("RSLinx","PLC-D") I was wondering was there anything I have miss out. eg. Configuration of the server, path settings, etc.. Any help is welcome. TIA Cheers CY
  11. Hi, I have a a few substations and I´d like to have a local SCADA in each of them. What is the best scada to use with reasonable price? Does anyone know if there is a solution without the need to have a PC for each substation? Thanx
  12. Dear Everyone can help     i have a batching system of about 12 materials and i need to generate a report for all batches in the day in runtime, i tried using SQL with Cicode but sometimes i can't find some material's data or to be Zeros. did any one here know a way to do that?? vijeo citect 7.4 thank you
  13. Delta eserver problem

    Hi Guys, Im using delta eserver to get data from access and there is an error. How do you solve this? Eserver is installed on windows server 8  
  14. Does anyone have any experience with the recently released user web interface for the iQ-F and iQ-R series. Supported by GX Works3 version 1.047Z or later, the firmware Version 1.100 or later. We have the sample user web interface running in a FX5U, its working very smoothly. I am currently looking into how to edit the html page, does anyone have any tips or useful tools/resources that I could use to work things out.       iQ-F Customer News regarding FW Update 08-2018.pdf
  15. Was wondering if anyone can tell me whether it is possible to use the Red Lion Graphite displays to remotely log into your system via Ethernet for programming.  Can it be used as a bridge to other Ethernet devices connected to it?
  16. Hi  How can I log the user action  at citect scada 2016 v8.0  I wan to log what the user done on scada like alarm acknowledge, disabiled or eneblied, enter any new valu of signal... ect..   Any Help Will be great  Thanks from now  Best rigards.
  17. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  18. Dear All, Currently I am working on a project in which I require a Customized User Dialog..I searched for that in Forum but didn't got any solution..So I would request you all to pls guide me regarding this Asap.. Thanks, Krishnakumar Mishra
  19. Dear All, In one of my projects I need to login in HMI via Windows Linked Users i.e. Domain Users..I have never done this before & don't I have any sort of idea regarding this..This is possible in Rockwell HMI's but not sure about Beijer IX HMI's.. So if anyone has done this pls do let me know.. Thanks, Krishnakumar Mishra  
  20. I am fairly new on this forum & PLC's, usually i read and get tips from here.I use a RsLogix 5000 PLC software. I am currently working on a project at home that requires me to read from a Access DB. What type of Instruction or method do i go about, initially reading from Access? I know Excel is possible It's an existing system. Add on functionality/feature. I am using a barcode scanner that will link up to a Access DB to verify the barcode is legit and send this info to a different system via PLC/EthernetThe access DB is used because its a older system, it uses that. So it is possible? and guessing from what your stating, its is more involved to get the system working eventually?PLC = A&B 1769-L23-QB1 CompactLogix Controller I am using FactoryTalk View Studio as HMI, do not have SCADA.I have a control logix chassis. Thank you in advance...
  21. [Manuals] - 3G3HV User's Manual

    3G3HV User's Manual View File Older Omron AC Drive Submitter Michael Walsh Submitted 10/03/17 Category Manuals
  22. 3G3HV User's Manual

    Version I515-E1-3

    9 downloads

    Older Omron AC Drive
  23. Hi all, I need your help on Factory Talk issue, also for Factory Talk Transaction Manager, I suppose is the same reason.  Windows 7 - 64 FTV SE 7.00.00 FTTM 10.10 I'm Windows administrator. ****************** Factory Talk Issue: Error message: (Error:0x800706ba) Error Failed to load VBA project display cannot be opened at run time. (This is the error to open the first display). Message from Rockwell knowledge database: Error in the OS event viewer mentioned domain controller cannot be accessed to authenticate user. ***************** FTTM Issue: Can't Start with Services. Error message: The Services could not be validated using the specified username....
  24. Input number from user to Compare?

    Hello! I want to make a really simple PLC program that compare 2 number. How can I load 2 numbers from user and send to PLC compare operand? Now I go to CMP and with mouse set values. There is any "imput" component in CX Designer? Sorry my poor english :S Thank you!
  25.  Hellow Mitsubishi Experts    . I want to update my system . My machine have Mitsubishi plc system . Details of plc - CPU FX1n-60MR-001 Expansion Module FX2n-8EYR  . We have two factories .In one factory have this Mitsubishi plc system (LOCAL Location ) .So from other factory (Remote Location ) I want to check some plc data via internet using some interface (Ex visual studio interface )  .It is mean I want to remotely check some data (machine production units ,machine speed and etc )  . I have plc program and plc software .   So what i want to add external modules to this system .?   How can i implement my design ?.   . I m appreciate ur immediate reply .       Thank you.   Tharindu