Search the Community

Hello guys, I sell cheaply Omron SYSMAC Programmable Controller - CJ1M-CPU12, CJ1W-PA202, CJ1W-ID232, CJ1W-ID211, CJ1W-OD232, CJ1W-AD081-V1, CJ1W-NC113, CJ1W-TER01, + cables: CS1W-CIF31 and CS1W-CN626 - Actual price is 290$ - more info+photos - > here < details: CPU:  CJ1M-CPU12 (ver 3.0) Small! Fast! Flexible! These machine controllers provide flexible control for all kinds of applications.  Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations.     PSU: CJ1W-PA202 Used to provide power to CJ1M CPUs and I/O units; AC and DC supply versions available; Clips to the left of the CPU; Also used to power expansion I/O assembly Note: The output currents stated are maximum figures. The combined 5Vdc and 24Vdc outputs must not exceed the maximum output power.   Basic I/O Units: CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) A wide range of CJ series input units are available featuring high-speed input and suitability for various applications.   CJ1W-OD232 A Wide Range of Basic Output. Units for High Speed Output and Different Applications. These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices.   Special I/O Units: CJ1W-NC113 Axis position control unit. Open-collector output. Point-to-point positioning controller withpulse train output.   CJ1W-AD081-V1(SL) Analog Input Module to convert varying input signals     OTHERS: CJ1W-TER01 End Cover CJ1W-TER01 (necessary to be mounted at the right end of CPU Rack)     Cables:   CS1W-CIF31 ↓ (length - 0,5m; used)   CS1W-CN626 ↓ (length - 6m; used)         Current status of each part: About a year used in a clean environment. Our creation of PLC Programmes have been deleted - PLC is ready for your creation. All parts have been tested and are fully functional. Personally, I guarantee the operation of all components. A part of this purchase is a PLC / USB cable (CS1W-CIF31; CS1W-CN626), allowing you yourself will be able to check the status of functionality. A part of the sale is not subject documentation neither software. (CX-Programmer can be obtain from the Internet.) Sale due to dissolution of company.               Product Description OMRON + Web links to specifications   CJ1M-CPU12 (ver 3.0) Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations. Other models are available with special functions such as the CJ1M-CPU2[], which provides positioning functions and built-in I/O, and the CJ1G-CPU4[]P. High-capacity Memory Cards up to 128 MB can be installed, and used to backup the program and system settings, or log customer data. The large instruction set can support diverse applications. Four types of programming are supported (ladder, structured text, sequential function charts, and instruction lists), with approximately 400 instructions and 800 instruction variations. These CJ-series CPU Units support structured programming using function blocks, which can improve the customer's program development resources. The various protection functions provide improved security to protect valuable software resources and property. The CPU Units are compatible with the CX-One Integrated Tool Package. Information for each component can be linked, and the system's data can be integrated into one database. The software can provide total support from PLC settings to network startup.   Specification: > here < Datasheet: > here <     CJ1W-PA202 Omron CJ1M CPU's, PSU's and Expansion Control/Interface Modules The CJ1M is a powerful and compact PLC family, covering applications requiring up to 640 I/O. CPU models are available with built in pulse outputs for stepper or servo control, and all CPUs in the CJ1M family enjoy optional modules for many types of I/O and communications. The CJ1M is the next generation of PLC from the earlier CQM1 series, and program compatibility eases migration between them.As with other Omron PLCs, the CJ1M series is programmed with CX-Programmer (RS stock no. 400-6440), designed for compliance with IEC61131-3. The backplane-less construction of the CJ1M series makes selection and installation simple; choose the CPU and power supply unit, then the I/O modules to suit the application. These items are simply plugged together end to end and then mounted on DIN rail.   Specification:  > here <   CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) High-speed input models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 90μs Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs. The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise. Either a Fujitsu or MIL connector interface can be used. *2 Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices. Specification:  > here <   CJ1W-OD232 High-speed output models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 80μs Output Units are available with any of three output types: relay contact outputs, triac outputs, or transistor outputs. For transistor outputs, select from sinking outputs or sourcing outputs. Output Units with load short-circuit protection are also available. *1 Select the best interface for each application: Fujitsu connectors or MIL connectors. A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external output devices. Unit have load short-circuit protection.   Specification: > here <   CJ1W-AD081-V1(SL) • Wire burnout detection • Peak-hold function • Mean function • Offset gain setting Use the Analog Input Module to convert varying input signals, such as 1 to 5 V or 4 to 20 mA, to binary values between 0000 and 1F40 Hex and store the results in the allocated memory at each cycle. The ladder diagram can be used to transfer the data to the DM Area, or the SCALING instructions can be used to scale the data to the desired range.   Note: Analog Input Terminals are also available as DeviceNet Slaves and as Multiple I/O Terminals. You will find further information on these in the Industrial Networking and   Specification: > here <   CJ1W-NC113 These position control units support positioning control via pulse-train outputs. Positioning is performed using trapezoid al orS-curve acceleration and deceleration. Models are available with 1, 2, or 4 axes control, and can be used in combination withservo drives or stepping motors what accept pulse-train control.   Specification: > here <         Payment Method 1.     I accept PayPal only. We ship within 3 business days of receiving payment. 2.     Serious bidders only, please. Orders will be cancelled and an unpaid item dispute filed if payment is not received within 16 days of purchase. Therefore, please make sure it is you need before buy the product.   Shipping 1.     Free Shipping 2.     Method : EMS or FedEx. 3.     Winning Bidder can receive the item in 2 days or 1 week from receipt of payment.  

Hi all,  Can someone please help me, I am using a Micro830 Controller running connected components workbench software to program the controller. I want the use the Real Time Clock of the controller to control an output to turn on everyday at 01:30am and turn of when it receives a signal from an input. The output will control a backwash valve that will operate and activate a cam switch internally that sends a signal back to the Controller to say the valve has operated and can now stop sending the signal to the valve. (if that makes sense). I have tried playing around with the RTC instructions but I cannot seem to get it to operate how I want it to. Any help would be much appreciated. EnvrioService

Hello All, I'm completely new to the motion control systems and I'm interested in learning servo programming and motion control. I was trying to find a good resource that I can start learning from A-Z, but I couldn't find any. I have a demo kit with compactlogix processor and two kinetix 6500 drives with servo motors. What is the best way to learn it. If you guys have any resources or basic sample program please help me. Any learning material would be helpful. Thank You All

The ICP DAS WP-9421-CE7 has just been released. It is a compact (3U), rugged PAC that provides AM3354 ARM CPU, dual Gigabit Ethernet, two USB ports, VGA ports, SD card slot and redundant power input. Learn more: http://www.icpdas-usa.com/wp_9421_ce7.html?r=dora  

Hi everyone, I want to receive signal  from E+H flow sensor to Rockwell PLC( module MVI69-HART attached to PLC). I tried to use local 4 which is new local opened when I added successfully MVI69-HART(INT type variable) but it not work. Sensor's monitor display mA values (4mA -> 20mA).  Could you please show me how to receive mA signal in PLC software or give me some documents related to this issue?  Thanks. Have a nice day. ^^

Gentleman…   Does Rockwell have any simulation PLC code that mimics an SMC-Flex soft starter?  Since we are using those (as well as the E3+ and E300) I would like to develop a model environment for starting of several drives.  In a specific case, we may have 3 or 4 drives in a pool of drives in which only a subset must be running at any one time.  Development of ladder logic for starting and maintaining those drives running while considering various fault conditions and startup issues would be very helpful in our environment.  I would like to be consistent among various areas within our plant that we incorporate pools of drives, from 4 to 2.  Having the ability to test in the lab would be very beneficial.  Thank you, David

PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

View File Rockwell/Allen Bradley ethernet communication Protocol/driver The Allen-Bradley Ethernet Driver provides an easy and reliable way to connect Allen-Bradley Ethernet devices to Client applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports the Allen Bradley SLC 5/05 series, PLC-5 series, ControlLogix, CompactLogix, and MicroLogix PLCs. Features Interface: TCP/IP Ethernet Port, DHRIO, Net-ENI PLC Supported: AB Controllogix, Compactlogix, Micrologix,  SLC50x, PLC5, via TCP/IP Ethernet built-in or Module port. Any device with Ethernet/IP protocol.  Methods:  Open, Close, RefreshInfo, ClearDataBuffer Events:  OutCome (fires when a communication transaction completes) , RXComplete, TXComplete General: Also Supports unsolicited messages from SLC, Clogix family. Via DHRIO, access SLC & PLC5 data tables for read/write. Read or write most of the AB data types. support for DataQueue reads in SLC and Micrologix Throughput: Reads 100 consecutive registers @ 10Mhz in 40 msec. This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here Submitter Scadadoctor Submitted 02/28/16 Category Demo Software

I am a new AB. I have machine with PLC-2. I dont have software tool to open project, only backup PLC. Anybody help me printout attached project. The best regards Jaca APV Douglas.zip

Good Morning guys, I've been working on the last months in a complex project in Pharmochemical Industry, in this project the customers will need run FactoryTalk SE Client in a Data Collector(Motorola MC3190 with Windows CE and resolution 320x320), so because FT doesn't run in 3rd party Microsoft Windows CE devices/platforms, i will use Remote Desktop Connection from Windows to acess FT in a PC. Until here i didn't have problem, i created one script that detect the resolution of screen and open graphics developed in 320x320. And here comes the problem: FactoryTalk use one ActiveX developed by Rockwell to make Digital Signature, and this pop-up is too big for the resolution of Data Collector(320x320). I couldn't find a way to resize it.... I attached a picture from screen of MC3190. Anyone knows one way to resize the pop-up? If not's possible, have a way to send as a parameter the information to Digital Signature function? Thanks.

Guys, I find CO2 controllers to be too expansive and ugly at 500 $ How can I Take a CO2 sensing chip read it it's signal compare the signal to equal or above a value turn on an AC plug (Type B) when below value, OFF when above valueBaiscally, I want to make a CO2 controller myself (soldering on board, buy individual components, put in a box) This will release CO2 in the room through a solenoid when below 1200 ppm, and shut off the solenoid when above 1200 ppm IF I'm on the wrong forum, could you advice where to ask ? Thank you ! Dominique

Hi, i tried everything i know and what i saw in all forums possible, and i can't resolve that problem. So i came here hoping have anyone can make this "miracle" rsrs This is the problem... Have one application operating with FactoryTalk SE 5.00.00 (CPR 9) in plant made by other enterprise and we will insert a new area on system. So we backup the application coppying this 3 itens: - The file: C:\Documents and Settings\All Users\ApplicationData\Rockwell\RNAServer\Global\Application.RNAD - And the folders: C:\Documents and Settings\All Users\ApplicationData\Rockwell\RNAServer\Global\RnaStore\Application C:\Documents and Settings\All Users\Documents\RSView Enterprise\SE\HMI Projects\Application After i create a VM with Windows XP Professional and same name of existent server, install FactoryTalk SE and replace the file and folders in respectives locals. So i open FT and all most of things restored, but the graphics didn't. I tried add them manually, It appears that is loading, but in the end, no screen was added. Sorry for my english errors... I hope someone can help me.

File Name: CLKSS 1.0 File Submitter: Jay Anthony File Submitted: 20 Nov 2014 File Category: Utilities Controller Link Software for Controller Link PCAT Board. Runs in DOS Click here to download this file

I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks.

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any GE plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any modicon or schneider plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any siemens plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any omron plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any AB plc.aslo the programme & instruction & parameters. using RS-232 interface.ASAP.

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and fx 3G plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface? i have used the instruction as show in the attachment.