Search the Community

Showing results for tags 'omron nt20s screen problem'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 399 results

  1. plc-plc via internet

    Hello all, I wonder that is it possible to communicate 2 CJ2M plcs or 2 NJ controllers via internet? Those are far from each other. There is WE70 wirelles unit however distance between them more than 5 km. Any idea how can i solve this issue? Thanks in advance. Have a nice day.
  2. Migration from C60H

    First of all, I'd like to say hello to all of you. This is my first post here. I'm not well experienced in Omron products and I need a little help from you. My client has an old machine with Omron C60H PLC, He asked me the make the backup of the program and put the newer PLC. I'm thinking of using CP1L series (or CJ2 - not sure of it now). The question is, what accesories do I need to connect and upload program from C60H to my PC? I heard that the 3G2a6-LK201 module is adequate. Do I need something else? I'm using CX-programmer. Can I handle uploading program from C60H with this software? Is there a function that converts old program to newer version compatibile with CP1L or CJ2 series, or must it be done manually? If you have any tutorials or tips and tricks about migrating from C60H to newer series of Omron, I would very appreciate it. Thanks in advance, Marcin
  3. CPU 314IFM adress

    Hi, I have a CPU 314IFM order number 6ES7 314-5AE10-0AB0 when i select it in hardware config it show I/Q adress 124 -155 while it should be to 129 only (the manual mention that and it covers all inputs and outputs and the special funaction also) I try (offline) to change the order number only (another 314IFM) found it give different address range for each CPU while it all have 20 DI/16DO 4AI and 1AO
  4. Hello, I am having troubles configuring my Data Station Plus to be able to read my Vacon VFD registers over a Profibus network. The network is configured from an Omron PLC. I have communication but i do not know how to map the tags on Crimson to be able to read what the drives are doing. I am most likely thinking my offset on the tags that i have set are the main problem. Any input/ suggestion would be great thanks Specs on System: -Omron PLC CJ2M w/profibus PRM21 -Omron HMI NS-12 -3 Vacon NX VFD's -Data Station Plus w/profibus module
  5. We are a vendor specializes in industrial automation field. many customers almost from all the world order industrial products on our website FastToBuy.com. we sale products include industrial control system PLC, HMI, Motors, even industrial PC and accessories, communication device, electronic components. Also we are the agent of many China integrated circuit factory. Not only supply all kinds of low price LCD screen products, you should know most of LCD Made-in-china is cheaper than other famous industrial brands and with a high quality, but also supply efficient solutions to solve our customers, we gained a reputation in industrial automation field, on eBay and AliExpress, you search "fast to buy" can find us,. In a word, we only want to make more people know us, we supply nice products with a high quality service.
  6. If you are looking for PLC spare parts check out our Ebay Store http://stores.ebay.com/Nordland-Industrial-Parts Make us good offers
  7. Omron CJ1M-CPU13-ETN to .NET Framework

    Hello People, In my school we had an assignment to program a Sorting machine using an Omron PLC and CX-Programmer. Now we got the assignment to make an HMI that we can open on our own computer (Windows 8.1) so that we can control various things of our program, such as reading and writing bits, and other data (To the PLC obviously). Now I only have very little experience in reading and writing data from a PLC (Using a PC), I have used the libnodave library to connect to a Siemens S7-300 PLC. With this I managed to read and write bits, and also read and write data to a DataBlock. We wrote this program in Visual Basic 2013 using the .NET Framework with the libnodave library as an added extension. Now I have searched far and wide on the internet but have not come across any good examples of how to do this with an Omron PLC. So I hoped that I could get some advice from you guys. What I'm asking is if anybody here has maybe a link to a guide/ example program/ manual that could get me forward? And if I can easily get this done with Visual Basic, by adding an extension, could anybody tell me which extension this would be? And where I could find it? I appreciate any help. :D Thanks in advance, BitsNBytesRookie
  8. Hello all, I'm new to this forum, hope I will be able to get some answers on this forum. I'm wotking on maintanance for machines under productiona and I would like to conect one machine to my work PC. But when I try to setup conection with RSLinx, RSLinx don't see my PLC. Problem is that my PC is on network with IP addresses 192.168.8.XXX and machine is on 192.168.0.1 IP address and between is cisco RV180 routher which is set to have LAN address 192.168.8.168 (company network), and WAN is set as 192.168.0.200 (subnet 255.255.255.0, gateway 192.168.0.201, dns 192.168.0.202). When I conect directly 1756 ENBT/A card to my laptop (laptop is set to same range of IP addresses) I can see PLC and everything is working but this way is not practical for me. Is there any way to conect my office PC to PLC, some settings in RSLinx Clasic? Any idea would be helpful. I attached simplified network drawing for easyer understanding. network.pdf Thank you for your time and help, best regards, baric1007
  9. Keyenece , read PLC KV40

    Anyone know how to read a program of KV 40 with protection MEMSW $ 8,000. It's an old ladder diagram I want to retrieve. I've seen this link which talks Pseudo reading it. Link http://forums.mrplc.com/index.php?showtopic=6782 Thanks, Ágora
  10. Unlock Functionblock OMRON

    Can anyone help me to unlock a functionblock in the plc program of a OMRON CJ2H program?
  11. OMRON PLC's and CITECT Comunication

    Hi All; I am struggeling to get my CITECT to talk with my CJ1MCPU12 with ETN21 module. I can ping the IP address from the citect PC and also connect CXONE using ethernet with supplied IP Address. I do not have FINSGATEAY installed as the PC is Windows 8 with CITECT 7.4. Any Ideas would be most welcome as I am drawing a blank. My settings are OMRON ETN21 IP: 192.168.0.3 Unit number: 0 Citect SCADA Primary Server IP: 192.168.0.24 Citect.INI [OMFINS] Source = 1/3/0 (not too sure what this should be...) COMMUNICATION settings: [bOARD] Name: BOARD1 Board Type: TCPIP Address: 0 [PORTS] Name: PORT1_BOARD1 Board name: BOARD1 Special Opt: -I192.168.0.3 -P9600 -U [i/O DEVICES] Name: Internal Number: 1 Address: 1/3/0/S Protocol: OMFINS3 Port Name: PORT1_BOARD1 Startup Mode: Primary Prioirity: 1 Memory: True
  12. Problem of CX-PROGRAMER

    When I open the cx programmer v.9, I am getting the following message: "could not initialise cx server. check installation". Can someone help me? I have been reinstalled the omron twice but cannot resolved this problem Thanks
  13. Hello, I am looking for Omron PLC's bit set instruction, which is similar to Mitsubishi's, like, in Mitsubishi PLC: Set B1000Z0 if Z0 is 10AA, then B10AA will be set. has Omron's instruction set contains such functionality? In my application, PLC will receive a number for example N(i.e. a sequence number), and I want to set the set the Nth bit in a memory block (W or so). Many thanks in advance. Xing
  14. OMRON NT31 HMI

    Hi, I have been communicating OMRON HMI NT31-ST123-EV2/EV3 for creating, uploading and downloading program screens with NTST4.6 but today I have received NT31-ST123-EV3-QR HMI but it could not be communicated with Support Tool. Can any one sort out the problem? Attached is the snap shot of error message.
  15. need help with SCADA database. moving 50k points

    Hello, Let me preface this. I have used this site many times when searching for issues and it has always been helpful. This is my first post here. I have been programming PLC's, HMI's, VFD's etc etc for 15 years, fairly complex stuff. I have also done lots of SCADA programming but more just for basic interface, monitoring, basic parameters changes, logging, etc etc. I am not facing a setup where I must do a large recipe/batch data transfer and I am confused as to what the best path is to achieve this. I have fairly basic knowledge of VB script as I have not needed to use it very often. Here is the problem I am facing. The SCADA package the customer has is Omron CX-Supervisor. The network is all Ethernet Based 1) I have 26 moulding machines on the plant floor2) There are 50 different moulds that are moved around from machine to machine3) Each mould can run 1 of 10 different colours4) There are 100 differing cycle parameters for each colour/mould combination =50x10x100 = 50 k points for total machine that = 50k x 26 = 1.3 million ! What the end result will be is this. From the SCADA operator terminal they would like to be able to keep a 'master set' of these settings, call up a mould/colour combo and see the individual parameters. Then they would like to edit individual parameters and download to each individual machine, or all at once. I do have a PLC at the Main terminal that was used for translation of the old serial network to ethernet. All of the serial connections have been removed so it is basically doing nothing. I could use this as a "master" for holding parameters if needed. What is the best way to go about this. Create a database, use the built in recipe manager, use PLC here as 'master storage". I feel once I get down a path it will make more sense...I just don't want to pick the wrong option and have to redo it all. Keep in mind my PLC coding is vastly superior to my knowledge of database manipulating and VB coding ThanksDan
  16. I successfully read the input and output of OMRON PLC CPM2A with Indusoft web studio (IWS) by using OMPLC driver. I have select OMPLC driver (Serial Com). Then configure a driver worksheet. The driver worksheet is the place that PLC tags are associated to InduSoft tags. I successfully read the I/O but I failed to write the I/O of PLC by using IWS. Can you help me? It is difficult to find OMPLC Standard Driver Sheet (SDS) for control relay output block (CROB) and Analogue output block (AOB). The attached diagram shows My Standard Driver Sheet (SDS) setup. Thank you for your kind cooperation. Zack Malaysia
  17. I am trying to setup communication between an EIP21 and a AB Compactlogix processor. Setup both units with Network configurator and Logix5000. In Logix5000 I used the Generic Ethernet Module with the correct consumer and producer tags and instances. When I go online Logix can see the EIP and bring up the module information but the connection itself is in Error 16#0114 Electronic keying Error. Unfortunately cannot find a way to disable keying like possible on the Controllogix Ethernet module. Can Anyone help. An application example or some tips how to resolve it would be great. Kind Regards Rolf
  18. Hi Good Day, I need a suggestion, I have an omron encoder, encoder counter meter (K3NC-NB1A) and communication card RS-232C 25pins (K31-FLK1). My question is, what is the best omron software to read and manipulate the data from the encoder (I have CX-one software but I only use CX-programmer). I want to capture the encoder pulse and convert to velocity, acceleration, deceleration and also energy absorbtion. I have to use mathematical formula such as two times differentiation. I also need to show grapf and display final result that is energy absorbtion reading. Or is it much simple if I use VB / labview / java software? Thank you in advance
  19. Connect OMRON CJ1H to GSM modem

    Hello guys, actually I am new to this Omron PLC. but i have small project to transmit a command to the GSM modem via the RS232 port so it can trigger the modem to send text msg. Can you show me the steps/guide/sample program to accomplish this program coding? I already read some topic in this forum regarding to this PLC RS232 port but still cant get the ideas when to create the ladder program. PLC Type : CJ1H (CPU65H) - RS232 port First input to trigger the GSM send text msg: AT+CMGS="+YOUR HP NUMBER" Second input to trigger GSM send text msg: YOUR TEXT MSG CONTAINS (Ctrl+z to send) Many Thanks, AlexB
  20. Hello all, I am trying to connect a barcode scanner to my plc using a 232C in the serial1. The scanner is a motorolla ls3578 fz, with the following parameters: Transmit code ID: yes Data Transmission format: Data/suffix Suffix: CR(1013) Baud rate: 9600 Parity: none Hard/software handshacking: none Stop bit select: 1 Ascii format: 8 bit RTS Line state: high Prefix: none In order to send data form the scanner to the plc, I use the RXD function block with the following parameters: First receive word: D300 Control word: 0100(hex) Number of bytes: &10 All the communication settings of the PLC are the same that the scanner ones. PROBLEMS 1)When I scan something the scanner beeps as if a transmission error occurs, and the data is ignored. 2)The A392.14 never comes ON and. POSIBLE SOLUTIONS Type of barcode: Now I am using a Code39 barcode. Is it OK? How can I implement the suffix? I have a software that allows me create new barcodes, but I don’t know what kind of data do I need. With 1234567891013 the 1st problem occurs. With 123456789 nothing happens. Communication settings: maybe my communication settings are not well defined. I attach you the file and maybe someone find out an error. Thank you up front! rxd.cxp
  21. MAD42

    Hello all I have a task to connect a auxitrol l20d to my omroan plc i have these moduls: CJ2M - ID211 - OC211 and MAD42. The l20d should go from 18-5mA and when it hits 5mA a alarm should go off, my problem is how can I adress the inputs/outputs in the MAD42. My wiring to the L20D is this : The l20d is connect to A1 5-6 with + at 5 and - at 6 How can I adress the anonlog inputs in MAD42. Could anyone help me, or maybe give me an example program? Thanks in advance ;)
  22. Hi, Is there any good documents out there on how to download to a NS15 Omron HMI from CX-Designer via Ethernet? Thanks, Andrew
  23. can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any omron plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?
  24. OMRON CPU CJ1B

    Hi i want to know anything (data sheet-video-documents) about the OMRON CJ1B BETO