Search the Community
Showing results for tags 'cp1h-y with encoder.'.
Found 94 results
-
Hello All! This is my first post so please give my descriptions some lee-way please:P I am having trouble finding a solid example of ladder logic which integrates a: PowerFlex (755 in this case) Rotary Incrematal Encode ( or any encoder for that matter) A Prox to reset the resolution at specific points along the axis Also, can I use the standard Motion Instructions (MAJ,MAS,MAM etc) to control the movement sequences of the PowerFlex or are they only meant for use with Servos? I am working on automating a Lumber Treatment Process. The movements will have to move tens of thousands of pounds.. Therefore I would like to use the PowerFlex as a Torque Limiter to control a 15HP squirrel cage motor on a massive gear reduction. I have the distances and pulses per distance traveled from the mechanical engineering guys.. I'm just having problems integrating! After using the Setup Wizard for PowerFlex how can I go about actually inserting movement instructions for the drive into my ladder logic? Some more info on different movement profiles.. I've also included my attempt at trying to piece this together thus far.. Any input would be welcome! (StellaPLC) https://sites.google.com/site/lyncedrgb/eva/rslogix The actual drive and PLC are not available to be me at this time.. could this be an issue while trying to write this motion control program? (obviously not testing & troubleshooting portion) Tugger Speeds Freq. ACCEL TIME DECEL Time E-Stop Decel Torque % of max Notes VERY SLOW 15HZ 0.5s 0.5s 0s 100 SLOW 30HZ 1s 1s 0s 100 Restricted to slow speed within 3m of ends of transfer deck HAUL 60HZ 5s 5s 2.5S 100 Max torque limit 250% of FLA EMPTY TRAVEL 120HZ 2s 0.5S 2.5S 30 Torque Limited to 25%
-
Hi, I can't add this CP1W AD041 analog module to mi PLC CP1H
-
Hi, I am planning to use an encoder on a CP1L to read on the RPM of a spinning wheel. For this, I can use high-speed counter 0, and the PRV2 instruction. My problem is that I also need the rotation direction. I was wondering if anybody had a tip for this? Thanks
-
i am working on CTL (online cutter)i am using fx3g plc with 1024 ppr encoder i want to calculate MPM(METER PER MINUTE) in real time with the encoder can some one help me with the logic and how encoder work in frequency mode
-
Hi Everyone, I have a PowerFlex 525, in Velocity Mode with a Encoder Card "25-ENC-1". We are controlling this drive via TCP/IP with a 1769-L32. Through the PLC if I try to toggle the Bit for "Pos Redefine" in A560 [Enh Control Word] it instantly turns back to 0. But through the Parameter List Editor I am able to toggle A560. For My function I need to have the drive in Velocity Mode, If I change the drive to Position Mode I am able to toggle "Pos Redefine" Any Thoughts would be great
-
Hi, I need to use an absolute encoder to measure angle of turning object. I have to use S7-400 and a PVM14 absolute encoder. The Encoder support "PROFIBUS interface" and use "Class 1 and 2 in accordance with PNO profile 3.062". I am looking for example code, or a good manual. Any advice appreciated!
-
Will cp1h –x40dr cpu support NB series HMI(NB5QTW01B)
-
Hello, The company that I work for wanted me to design and build a FIFO loader. For those who do not know what a FIFO loader is, it's basically a lift that runs up and down and filling up the magazine slots with pcb's. After I finish the mechanical part i'll try to program it by using a CPM2C - 20. I have already played with CX-programmer and learned my self a bit, for example how to program simple things such as AND and OR gates for controlling motors and lights. Really hard part for me was figuring out how to create a program that reads data from the encoder and use it to create positions which the motor will stop at, and i have not yet figured it out. I've been trying to google it without any luck, the only thing of real info i've got is a 650 page long pdf file or CX-Programmer manual which is hard for me to read since i'm new to all of this. Would be great if any of you people got any source or maybe a manual which are easy to understand for new beginner like myself. A bit about the program i would like to make: The FIFO loader will have some buttons for selecting different programs, lets say you press first button to select "program 1". Then the machine should move up and stop at posision "50" (there are 50 slots on PCB magazine) after it gets signal from pneumatic actuator (which will be used to shove pcb inside the slot) its should move to position "49" and so on.. If FIFO loader is located at "home" position and you press second button to choose "program 2", then it will move to slot "49", wait until it gets loaded, and continue to slot "47" and so on.. The meaning of this is to make a loader which can select a program to fit pcb's with different size of components.
-
Hi, there, I'm totally new to OMRON PLC, right now I'm using CP1H PLC have two CP1W-CIF01 on it 1st CP1W-CIF01 set as 115200, 7,2,E, Host Link, station 0 connected to Pro-Face HMI 2nd CP1W-CIF01 also set as 115200, 7,2,E, Host Link, station 1, I want to use this COM to talk to my PC that I can run vb.net program to monitor the bit and set the bit value. can you guild me how to start this project? thank you very much! Chen
-
Dear experts, i'm in learning curve to understanding converting DI to Ascii code. i'm attach here my solution that i'm think should be no problem. may i'm know how to send special symbol plc to printer. communication using modbus TCP. Printer format was: JDU |HEAD1|HEAD2|HEAD3|HEAD4| <CR>
-
Hello all, Let me start by saying that although I have been working with PLCs for 20+ years I am very (as in brand) new to the Siemens world (my wheelhouse is AB). That being said I have a Siemens S7-1500 (1511 specifically) CPU with a couple of SICK multi-turn Profi-Net encoders (AFM60A-S4NB018x12) that I need to talk to. - I am using TIA v13 with all of the updates. - I have the GSD file from SICK for the encoder. - I have no clue what I am doing - I can see the encoder values update in the watch table as I move the encoder. All fine and dandy so far... Here's where the white flag is going up.... - I am of the belief that there are existing function blocks out there 'somewhere' that can read and write to the base parameters. I have contacted our local rep who deferred me to SICK. I have emailed and left messages with them and have not gotten a return anything thus far. Here's our application... We are attaching each encoder to its own rotary gear mechanism. The rotary will need to turn in the CW direction approximately 400 degrees then return to its start point by rotating in the CCW direction by the same amount. If/When production/maintenance needs to 'rehome' the assembly, the expectation is that they 'pin' the drive in a known location then a bit would be set within the CPU that would assign a specific value to the encoder's actual position. In the SICK manual (8015078/YIX6/2015-01-16) on page 31 (section 3.6.3) there is reference to Preset control. This is what I believe we need to perform the aforementioned function. Does anyone have any examples that they could share on how to read/write to these encoders by use of a Function Block or other? Relatively desperate for help at this point. Can post test code if need be. Thank you in advance, TLAF
-
Hi, i am start a aplication whith modbus for a simple comunication(read/write), some analogic imputs and outputs, whith, AB Micrologix 1500 LSP (1 com port Rs232) and whith a Omron PLC CP1L-L + CIF01 (rs232). I using CP1L like a master, but i try a lot of time and no read/ Write happens, just the recognition of Node (1) and the error code 88, no mather whith Function code i use. I use Modscan32 whith Micrologix 1500 and works fine, com settings are right to, i try 38k, 19,2k, and now 9,2k None stop bit 1, setting on CP1L are in serial Gateway. If i take the cable the reponse memory go to zero, so the communication is happen, just dont in right way. Is possible to use, RS232 whith CP1L, for Modbus communication right ? I already see PCMR code for modbus, but is to complex, for my aplication. No ofense. Someone can help me?
-
CompactLogix using Analog Press Encoder
jrupp82 posted a topic in Allen Bradley / Rockwell Automation
I'll set the scene a little before I explain the issue that I am having. I have an application where I have a Linear Servo Slide acting as a Press Kick-off cylinder on a ceramic press. In order to trigger this Slide accurately, I have installed an Absolute Rotary Encoder (a Turck product) to the press, which outputs an Analog signal for its specific position. I then have this as an input into my CompactLogix L33ERM through a 1769-IF4 Analog Input card. Within my code, I'm trying to capture the moment where the press has presented the part out of the die and it can be ejected from the press cavity without damage the part. Mis-timing on this ejection and the part will clip the die pad tooling and incur damage upon ejection. Now, one last point of clarification, I am a Mechanical Engineer by trade, so I don't claim to be an expert programmer. But I have learned a lot and have gained experience in programming applications like this, so I can learn quick and should be able to program this task. I have had my local Allen Bradley guy look at the code I'm using for this application, and he thinks it looks good, but I'm still having issues. What I have done, is within the code, I have a window that I look for, of the encoder's position, to trigger the ejection shoe to fire its sequence and kick the part off. However, I have had to make this window so large in order for the code to see it every press cycle, that occasionally, the ejection shoe will be fired at the back end of the window, which is actually too late, and my part is being damaged. Attached is a snapshot of the code. The OkSamplePress.DN is actually a timer that I have that looks at the current press rate and puts a delay in to not allow the kick-off to fire too early, because I was actually getting a glitch before where the kick-off would fire prematurely for some reason. I don't know if anyone can offer assistance on this or not, but I would greatly appreciate any help at all. Its become quite frustrating, as the rest of my machine functions quite well, and this seems to be the nagging issue I can't get rid of. Thanks in advance...Josh -
Friends, I have a CP1H 40-xa-dt monitoring and positioning a hydraulic cylinder. The HMI I am using is a NB5Q. As of right now, LVDT position is wired directly to a Parker BD98A servo card which looks for input voltage with respect to the positive and negative terminals to determine output in positive/negative direction. (eg. positive voltage on IN6 vs IN7 provides positive current on OUT1 vs OUT2, positive voltage on IN7 vs IN6 provides positive current on OUT2 vs OUT1). My Issue is that the LVDT only operates in a positive voltage direction. I've wired up a relay to switch the wired terminals as an experiment and it works, but the LVDT voltage goes from a maximum positive to a maximum negative voltage to input terminals and the cylinder slams retracted. I know the CP1H can be scaled -10 to 10vdc on the D/A terminals. Could a SINE function be used so the cylinder will follow sine wave and extend while riding the curve in positive direction and retract once sine wave is below 0 in the negative direction? If this is possible can i control the speed of operation, like using an increment function? The cylinder is only being tested for operation for a certain amount of time to ensure no leaks after rebuild. I am a bit new to this. Regards, Thor
-
Hello, I am not sure if this topic is too far from what the forum concerns, but any advice is greatly appreciated including reference to other reference. I want to know if any induction motor has internal encoder equipped. We are using servo motors, and additionally an encoder for position check. Because the position control resolution requirement is about 1 degree, I am thinking about abandoning servo motor, and to use induction instead. Servo motor has internal encoders for outputting pulse information. And I wonder, if there are induction motors with internal encoders. Thanks in advance. Ting
-
Turning inches traveled per pulse (a real number) to inches per minute
487mcgill posted a topic in Allen Bradley / Rockwell Automation
I am currently trying to get my program to take distance traveled per pulse, which is based off of the diameter, and convert it into IPM. I am using RS Logic 5000 software. If anyone could help me get over this hump I would really appreciate it! -
I need to replace existing encoder with quadrature output which is failing. We need to have minimum measuring distance of 60 inches. The encoder installed by manufacturer is Temposonics R-series RHS0650UMSO1Q1AC10 The resolution can be lower than the current encoder, probably 500 counts/inch or higher would be OK. Do you have any product that can be used? I was thinking about string encoder but I am open to suggestions.
-
Hi Good Day, I need a suggestion, I have an omron encoder, encoder counter meter (K3NC-NB1A) and communication card RS-232C 25pins (K31-FLK1). My question is, what is the best omron software to read and manipulate the data from the encoder (I have CX-one software but I only use CX-programmer). I want to capture the encoder pulse and convert to velocity, acceleration, deceleration and also energy absorbtion. I have to use mathematical formula such as two times differentiation. I also need to show grapf and display final result that is energy absorbtion reading. Or is it much simple if I use VB / labview / java software? Thank you in advance
-
I need help SSI Encoder with Micrologix 1400
Angel Valdez posted a topic in Allen Bradley / Rockwell Automation
I have a project where I need to use an SSI Absolute Encoder with a Micrologix 1400 PLC. I've never done this and need help. The SSI have a Clock and Data signals that are different from anything I've ever used. 1.Can it be done using the HSC inputs? 2. I found an AMCI card I could use but I am trying to keep everything AB and in the Micro Family. 3. I don't want to use Gray Scale encoders because of the number of Inputs I have to use. Trying to package a small enclosure and don't much room left. 4. AB sells an SSI encoder but they don't have any info on hooking up to anything other than Point IO module.(kills my budget) Thanks and any assistance would be greatly appreciated. ~Angel
