Search the Community
Showing results for tags 'Serial module mitsubishi'.
Found 451 results
-
I would like to send ascii data to other devices using RS232 interface. and the example format is "0009" (it is product counter machine marking). how can I do this? I am using q03ude, I usually convert 1001 to ascii using BINDA and use the last data (01). but, when it double word data e.g. : 100009 the last data is 9 and null, not 09
-
Hello, since they redesigned the mitsubishi FA website I am unable to find software updates. Is it my fault or did they forget to put them in? Thanks
-
I have this setup: FX3G CPU connected to GT2103 through RS422 (CH1). GT2103's ethernet port connected to LAN and set up as modbus TCP slave (CH2). I want to read/write PLC word devices using a modbus TCP client, from a PC. The HMI is acting as a gateway between PLC and PC. I used the Device Data Transfer function to send PLC's D register values to GT's internal GD registers. D0....D9 ==> GD0....GD9 After some tries, I get valid response from the modbus slave. Reading the holding registers 0....9 (40001....40009), I get only zero values. Those registers can be written back with different values, correctly. I'm sure I didn't understand correctly the modbus address mapping to GT's internal memory. Can anybody help me? Thank you.
-
how to use device net in FX5U SERIES PLC WITH FANUC ROBOT DEVICE NET CARD A20B-8100-0490 /03B
-
Hello! I just recently started learning about PLC's at University. While using Gx Works 2, how do I turn on auto complete for existing variable names? With this I mean, after creating a variable, for example bSystem_Started, if I want to use it again, what setting do I need to change so that by just typing "bSy", a pop up appears saying the whole name "bSystem_Started", so by just pressing enter it auto completes. Thanks in advance, Greetings, Patrick.
-
Hello, I got problem with melsoft GT Designer 3. I created a project and i must go threw recipes. I think I did everything well but my Record No. doesnt work as it should... https://drive.google.com/drive/folders/1p06cnkcfnmodmuLDfrhlshtlYgbUsFnj?usp=sharing Here is video with presentation as it works and GTX file. It have to be done with this kind of recipe. I dont want standard recipe table I think its pretty easy and i have small error Thanks
-
hello everyone, I using stepper 17HS2408, microstep driver, modul motion QD75D2, PLC QD3UDV,, i've been trying to use program Absolute in axis 2. When I trigger the command to run absolute program the current value is running but the stepper motor still not moving, is there any suggestion about this?
-
Question. After install 3 months ago...What would cause a plc module to stop working during production, not let people apply settings and revert back to old settings and permeters. Using some Intelligent design functions. Also it would not let the backup be applied.
-
Hi everyone. I need help with iQ-R system. Is it possible to connect an additional expansion bus to an existing system without powering down? Also, can I install new I/O module (RX40C4) to an existing system at hot state (like a hot swap)?
-
Hi, I have basic experience with PLCs but have a degree in electrical engineering. I have landed a job which requires me to advance my plc knowledge. I am based within the UK and need some advice on how to go about a solution to a problem. The site I am doing this for needs a site managment system. The site is within food production, this would be monitoring of mostly trips and faults within a wide range of industrial equipment (Pumps, compressors, fridges). The site is mostly Mitsubishi and would like one centralised portal within the workshop to view all of the equipment availability. Thank you.
-
Hi all! How can I use two AB phase encoder at the same time. I use Mitsubishi FX1N PLC, and I would like to use a high speed counter. I think the plc has 6 high speed counter input, but I cant use only one at same time.
-
Hello everyone, may you all bless with the best. Can anyone please help me on connecting and programming In Modbus rtu INVT CHF-100A vfd with FX2n having rs485-bd moblue. I want to connect 11 vfd and one fx2n plc also
-
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
I am having problem working with Mitsubishi FX5 PLC. How to send two bytes data into one word. I want to send first byte into lower word and second byte into upper word.
-
i wana connect gs2110-n with a2ushplc-s1with rs422 icant find diagrn wireing ? can you helo me please...
-
I have plc mitsubishi A2USHCPU-S1 and there is already a program in it. The problem is, the analog input data doesn't want to be saved. How do i find the analog address instructions? Can anyone help?
-
Hello, I've been using Mitsubishi and Omron systems separately (in their own environment), and I am fairly new when it comes to connecting these two brands together(plc and hmi). I've been scouring the net for wiring diagrams for the cable connections and also the parameters to be set for a successful communication between those two components. can anyone point me at the right direction as everything I've tried so far has been a failed attempt of making these two communicate. here are the parts and my current settings if this helps: FX3U-64M FX3U-232-BD NB5Q-TW00B or better yet, is there a proper cable that I need to buy for this to work?
-
Can someone help me how to transfer D memory in gx works 2 but only 8 bit (Mitsubishi D memory is 16 bit cmiiw) ?
-
Hello, I want to know, if it is worthwhile to transfer from Q series to iQ-R? Currently our equipment is using Q series, which ss a vacuum coating equipment with about 10 power instruments, 20 gas controllers, and pumps and so on. As for the analog and X, Y points, Q is quite capable. I can not see any advantage to switch to iQ-R, but some people want to. So I want to know, 1. will Q be outdated in the near future? 2. will use iQ-R cost much more than Q? including peripheral units. 3. has iQ-R really been widely adopted? 4. thoug iQ-R may be powerful, I think use multiple middle size CPU's can be more advantageous, is this right? Many thanks in advance. Ting
-
I'm attempting to look at an offline PLC program to see device values (Ts, Ds, Ms). Is this even possible? Are device values saved when saving a program online? Program is for a Mitsubishi FX3U. Using GX Works2 v1.601B. Win10-Pro OS on the computer. I've an AB background (several decades), but only a couple weeks with Mitsu. Unfortunately, the person who originally wrote and maintained these programs isn't available. This is an easy process with AB, but I just hit walls in the Mitsu IDE. Can anybody help?
-
Could you display text data from sent from hyperterminal on a mitsubishi GS2107 HMI? If you type in hyperterminal the text should be visible on HMI by connecting it through RS232 port. Can this be done without using PLC
-
Hello to everyone. Nice to meet you all. I am programming a KINCO PLC model HP043-20DT using ladder on KINCO BUILDER. I need to establish a serial communication with my PC. The PLC has a RS485 port which I adapted it to USB to connect with my PC. The PLC allows, at least, two ways to establish serial communication: MODBUS or free-protocol. I've read the software manual and tried to reproduce the examples it provides using the instruction blocks for MODBUS (MBUSR and MBUSW) and free-protocol (XMT and RCV) communications. However, I could not receive the data on the PLC. I could effectively transmit data with XMT from the PLC to the PC and I could verify through a tool called Access Port. In relation to MODBUS, I am using a simulation tool called Multiway from OMRON, however, I get no response from the PLC. If any of you have some experience with this software or this device, I would like to ask you how could I solve the problem. Thank you for your attention. Kind regards.
-
Hello to everyone. I hope you are doing well. I have a KINCO PLC HP043-20DT. I'm communicating through free-protocol instructions XMT and RCV. The manual states that memory registers SMB86, SMB186 and SMB286 contain information about the state of the reception instruction. I would like to ask if any of you know of the existence of an analog register but with respect to the transmission instruction, instead of the reception. The manual does not indicate it and I could not find any information online. I've sended an email to the manufacturer but, until now, I have not receive any answer. Otherwise, how could I search for this information? I tried through the manual providede by the manufacturer, but maybe there is other way. I would appreciate any information. Thank you so much. Kind regards.
-
how to use function (prun)
-
Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi? Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe. Thanks in advie
