sczot
MrPLC Member-
Content count
81 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by sczot
-
according to mitsu manual (chapter 8.1) when LERR is flashing its caused by conection cables
-
hello, you would have to share more details, but i would start checking cables and connectors
-
Hello and thank you @AndreasW, it looks like my memory failed me, but i´ve found some help in manual listed.
-
Once agin hello all, im pretty sure, that in the past i found in some manual special relay (SB????), that was set on when PLC was executing RIWT instruction. Now im trying to find once again, but with no luck, ive searched through all manuals that looked relevant, but nothing... any help will be highly appreciated.
-
Hello all, is there a way to declare an array of constants with different values for each of array element?
-
hello, i would use script for this if([w:D0]<2){my.active = 0;}else{my.active = 1;} redraw_object(); where D0 is Security Level Device from security setting and "2" is security level of my choice
-
How to reset the bits in D6 and D7 after M1 and M2 is triggered
sczot replied to sengkai's topic in Mitsubishi
Hi, not a ladder but it should work as you want, if i understand it correctly -
IQ-F FX5U Predefined Protocol Support Function to Implement Modbus ASCII
sczot replied to EkremVK's topic in Mitsubishi
hello there, hope I´ll be able to help a little, FX5 have some internal support of modbus comunication in attached screenshot you'll find where it find bellow is manual dedicated to FX5 modbus http://www.atronika.com/Mitsubishi/PLC/MITSUBISHI_manual_plc_fx5_modbus.pdf -
Hello, sorry for delay, but tbh i've totaly forget about it... in attachment you have file with simple example of offset use, you can try it in simulation with empty program in GX works 2 simulator. Hope this will help pks.GTW
-
hello, digital I/Os dont care about position, it will always go 1,2,3,4,5,6,7,10,11 ... 97,100,101
-
so, you wanna have one basic screen with ten motors and one pop up window with three buttons with address depending on which motor was chosen? if i understanded it, then use switch on main screen with ůword action" set constant with number of engine in pop up screen use switch and use offset (in extended tab) which will be defined by constant from main page to use devices conected to engines have no time to test it and attach screens right now, but hopefully it will send you in right direction
-
hello, go to system tab in sidebar, then GOT setting>Type setting> change GOT1000 to GOT2000 then just click your way through conversion setup once GT designer for GOT2000 is opened
-
hello, depending on other things, it maybe would be cheaper to use some mitsu HMI (and will be much easier), because based on what i know, you will have to buy ENET card for each of your PLCs (FX3GE have enet port, but with locked ports under 1000, so modbus is mostly unaviable because it is using port 502, so you'll have to buy ENET-502 card), and tbh im not even sure if older PLCs have 502 versions of enet cards... Also there is program to use modbus TCP done by mitsubishi but only for FX3, so you will have to adapt it for older ones...
-
Hello all, do you know if there is some place on the internet where information about changes in new versions can be found? By pure luck I've found today that mitsubishi greatly enhanced their compiler (about 25% less steps from FBD in v. 1.053F compared to previous one), I wonder what other things I've missed...
-
Cool, thank you both!
-
now i see... have you considered using of FX-EEPROM-16? It is just memory cassette, so there is no need to rebuild your old machine. You can search ebay, but our local mitsu dealer is still offering them... Simple ladder is in theory most efficient, when it comes to step size
-
Hello, is there any reason why you simply cant rise memory capacity to 16k?
-
You''ll be able to program and setup your FX5 with GXworks3, it can work as CC link IE basic master for network of up to 6 slaves... from pure curiosity, can you share some details of your project?
-
according to CLPA these are your only options nonPLC CC link IE basic masters in link bellow https://www.cc-link.org/sch/c010List?bunruiNm1=CC-Link%20IE%20Field%20Basic&catTemplateSeqNo=111&menuSeqNo=2
-
Hello, according to your picture SM1 contact is Closed contact... basically it is negation
-
Hello once again, before I'll dive into mitsu manuals, does anyone of you know if there is some special relay signaling that PLC (FX3GE) have lost communication via MC protocol? Thank you in advance
-
Hello, 24MR or MT? R is relay version T is transistor one only T is able to PWM
-
We have balluff cc-link master with four IO-link channels, and we want to use TT to parametrize IO-link devices.
-
Hey guys, I've question about Transient transmission (TT) via CC-link using FX5 as a master. According to chapter 4.3 in "FX5 User's Manual (CC-Link)" only way to access TT is via computer with GXworks3. Is there some workaround to use standalone FX5? Thanks again
-
Hello, just numbers in Hex format.