misak

hello all i'm working on a project and i have to sent some info from the cj1m cpu13 to spred sheet ms excel, in order to sent the data i'm using the dde manager . my problem ,how i will send data from excel to the plc ? omron project editor v3.2.2.1 using cx server v3.2

Thanks i already locate some solutions in low cost opc server from ingear ,thanks anyway

hello all, I'm using rs view me edition and I'm trying to find what settings i have to do in order to connect a panelview 600 plus with omron cj1m cpu12??

ok !! the deep switch no 6 on cif 11 have to be on !

hello all, i have to send #010 ASCII code to the remote device .I'm using a cp1l 30... and a 485 port cif11 . using the instruction TXD and placing d200+1 with the value 2330 3130 in hex and i receive the same value in the RXD instruction what I'm doing wrong??. in the past same application with cj1m and scu41 using cx protocol i whose sending "#"+"0"+"1"+"0"+<t> and the communication whose OK

But i never got the response ;

m160_soft.cxp

where i can fined factory talk view me trial ?

2711p-k6c5 tomorrow I'll be again in the plant (100km away)

hello, i'm tring to upload from a panel view 600 plus with no sucses , I'm using panelbilder 32 any ideas what is wrong? com setings on panel view 19200,none,1,bcc pc point to point df1 19200,none,1,bcc

i think it whose error 2002

hello, i want to sent to the plc a batch of (500 dm words) for me it's easy to make the batch using exel how i will sent it ? plc cj1m cpu 21

yesterday i had the same problem and look what i have done: on tab color shape select indirect and add an address then from plc move the color value to the specified word (each color have a specific number 0 for black 15 for write and....... ) with this method you have 18 deferent colors on an grey scale and 256 on color screen

hello, I'm using the data block in order to send to the plc order (length and quantity) the question is. can i replace the manual procedure of changing records by a singl bit frome the host?

thanks beegee I'll try it

i need fore production schedule, the problem is that every day they will make new and fore me it's better to do it from a data block because some time they need to add a recored during the production and execute immediately.

I'm not sour that i understand you how the command button will execute the next recored after complication of the previous

hello all, there is any way to find or crack the password of a cj1m cpu 21

hello all, if i understand well the problem my suggestion is to copy the feedback and when you want to go to manual don't do it instead move the coped value and the pid re manes still.

hello I'm trying to connect a TLC 20 controller in order to download a program but i can't link the controller with the pc .what have to be the port settings ??

if i understand well you have to change DM10 to an HR

all the components in a standard control panel i build (30 piece per year) is AB the only different is the logo and the push batons that are Telemecanicue

hello, i need some help , the Pico gfx-70 don't have any input points?and what about the display unit i need two possessors?

hello , what i have to do to reset a major alarm from the CPU with out rslogix? the problem is that some time when they turn on the machine two output cards are off this is o curing the fault then i plug the laptop ( after 300 km i have done)i clear the fault and every ting ok!!!!! this have hapened twice in the last 2 months (the machine is working 12 hours every day)

what???? please enplane to me beter