Search the Community

Showing results for tags 'setup'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 9 results

  1. Hi Guys I was wondering if any one of you could tell me how to set up some basic button functions? I need a basic instruction on how the followering button setup, could be done on the HMI, preferable with exaples or tutorials etc. !!! I´m working with the current setup: NX1P2, using Sysmac Studio, Module version 1.25.1.0, along with a NA5-Terminal, version 1.18 !!!  START_VALVE_1_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_1_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 1 mode, or deactivate the mode). START_VALVE_2_BUTTON = Toggle, Momentary, Set or ?? - (Need the START_VALVE_2_BUTTON to activate ON_BUTTON & OFF_BUTTON flashing, indicating selection option, ON or OFF, meaning activating start valve 2 mode, or deactivate the mode). ON_BUTTON = Toggle, Momentary, Set or ?? - (Need the OK_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed). OFF_BUTTON = Toggle, Momentary, Set or ?? - (Need the ON_BUTTON & the OFF_BUTTON to flash simoustaniously, after START_VALVE_1_BUTTON, or START VALVE_2_BUTTON has been pushed).  !!! Hoping to hear BACK from some of you VERY soon, because I need the know_how ASAP. !!! !!! Write soon !!!
  2. Dear all Please identify me i am having one Issue in my PLC.When I changed the IP of my plc then suddenly its showing error ERH its mean IP address wrong but  My CPU setting is same like previous means unit no=0, x16^0=0 ,Node=x16^0=1  and IP is 192.168.0.15 Mask add.255.255.255.0. but when I, transfer to PLC (in Program Mode) its not transferred(Failed to Transfer) please rectify me where I am doing wrong.
  3. TIA Portal V13- Alarm for Bool Data type

    IN TIA Portal V13 HMI Alarm Setup, Discrete Alarm Not allowing Bool Tags in "Tag Trigger". Please help how to set Bool Alarms?
  4. I have entered the messages many times into the Alarm Setup but every time i re-open the alarm setup, every message that has the Trigger Value=1 will be deleted.  Anyone have a similar issue?
  5. PLC setup error location

    Dear sir, how to solve this problems non fatal error 9b, Omron cpu44 c200hx
  6. RENU FP3035-5 and FL005-0808p

    Hi, Can anyone tell me how to get the FP3035-5 and FL005-0808p to talk to each other via the com1? may be a sample program would be nice. thank Arie
  7. Hi. I have a ST-Lite Ethernet base (STL-ETH1) with 1 16 bit digital in card, 3 digital out cards, 2 analog in and 2 analog out cards. I have a Q03UDE CPU (Q PLC) with 1 16bit digital in and 1 digital out card. Now I like to setup the remote I/O (STL-ETH1) mapped to the Q PLC via the ethernet port on the CPU. Is it possible not to use Modbus at all. I don't want to go and buy a Modbus Ethernet card now. Have someone done this before?
  8. I need to set up D/A module. I have few questions. What is the difference between offset and gain setting mode? I would like to use range 0 to 10V which would have to be set as user range setting, can I do it using GX Works 2? Or do I have to use the GX Configurator-DA package?