Posted 13 May 2020 Hi guys I am trying to connect a Mitsubishi FX5U PLC to a Siemens WinCC RT Advanced. I did find a document on the Siemens side on how to configure the HMI, but I can't seem to find any instructions on how to configure it on the Mitsubishi side. Any help, sample will be appreciated. Kind Regards Morne Share this post Link to post Share on other sites
Posted 13 May 2020 this info should be made available from the siemens help. But they are probably using the SLMP driver. Which settings have you made at the WinCC for the FX5U? Share this post Link to post Share on other sites
Posted 15 May 2020 According to the Siemens documents, WinCC RT has a built in driver for Mitsubishi PLC's. It utilises the Mitsubishi MC Protocol. A UDP connection will work for this on the Mitsubishi side, Port 5002 is assigned from the siemens side. So the same port will be used on the FX5. You can also use Modbus TCP. 1 person likes this Share this post Link to post Share on other sites