Posted 22 Mar 2017 Hi there, I have developed a micro extrusion machine and amongst all the variety , I am unsure which PLC to choose. I have to control HEIZBÄNDER heater, a few linear and servo drives. Thanks ASD Share this post Link to post Share on other sites
Posted 22 Mar 2017 Your best choice will be a brand that you can easily obtain in your area and for which you are comfortable with the level of available support. Also give consideration to the potential end users of your machine and the availability of spare parts and support for them. Share this post Link to post Share on other sites
Posted 22 Mar 2017 And the cost of the programming software... Share this post Link to post Share on other sites
Posted 25 Apr 2017 Much will depend upon your I/O and communications requirements. Feel free to review the products we offer from Triangle Research, manufacturer of an embedded Ethernet enabled line of PLCs. http://www.eternity-sales.com/tri-plc/tri-plc.htm If you have any questions, feel free to respond to this post, pm or email me through the link provided below or on our web site through the link above. Disclosure - ESI is an authorized Triangle Research distributor. Share this post Link to post Share on other sites