Posted 6 May 2016 Hello. I am in the process of learning how to program and diagnose our equipment in the plant I just transferred to. We have mostly A series CPU and slowly upgrading to Q series. With GOT interface. Is there anything I can read that will help me understand more. I have more experience with Allen Bradley. There is a lot in our logic that I am having a hard time understanding. How do timer values, frequency drive speeds, encoder set points etc that the operators change on the GOT get written to the PLC. Share this post Link to post Share on other sites
Posted 6 May 2016 To answer that question; They will be writing to D registers. The D register will be allocated in the GOT and the plc program will use the value written from the screen. Share this post Link to post Share on other sites
Posted 6 May 2016 There is very little difference in how a GOT communicates with the A or Q series PLC, and how a SLC500 would communicate with a panelview. You just have to learn the addressing structure. As Ron said you would use a D register to read/write to the PLC. That would be equivalent to a N7 register in AB land. I suggest you get yourself a programming manual for the PLC series you are working with and read up on the devices. Hope this helps, Dave Share this post Link to post Share on other sites
Posted 6 May 2016 Mitsubishi also offers programming classes in Toronto and Chicago. A class might be the quickest way to get up to speed. And they do offer some online training on their website to get started with. Share this post Link to post Share on other sites
Posted 9 May 2016 FA e-Learnings http://www.mitsubishielectric.com/fa/assist/e-learning/index.html Share this post Link to post Share on other sites