Can I link 2 brands of PLC to SCADA via OPC Server

[thanya 1]

Dear All Can I link 2 brands of PLC to SCADA via OPC Server My configuration is following the picture Have a nice day! Edited 30 Jan 2011 by thanya

[Mark- 17]

Hello, PeakHMI supports many protocols, includes an OPC DA server and an OPC DA client in the base package. All drivers are included in the base package. Assuming we have the drivers to communicate with the PLC, PeakHMI can perform the task as configured. Good luck, Mark http://www.peakhmi.com/

[Crossbow 297]

You can use more than one OPC to communicate with one SCADA package. So yes, this is entirely possible.

[JesperMP 2]

It is the whole idea of OPC. To have a standard interface between applications and "devices" so that totally diverse suppliers can connect. A device maker and an application vendor may not know of each others existence, but if they both support OPC, then they can talk to each other.

[Supporter 1]

Hi, Beijer Electronics has an OPC-server that supports both Yaskawa and Mitsubishi. Best regards Patrik

[thanya 1]

Dear All Thank you so much