Search the Community

Dear friends. I faced one problem of recipe working. Could somebody help me? I try to create recipe and use it in my program. Fisrt of all I decided to learn how it working and for this I used documentation NB-Designer Operation Manual. I created my test program, but it doesn't work as I need. Bellow I want to describe, what I need: I want to have 5 program with 4 parameters and download these program with parameters inside to the PLC. In attachment you can see my program. test.zip

Hello! So I have this issue with me by this week. I have an NJ with unit version 1.00. I had not did any download/upload on this unit. Due to the need of showing using Password capability on Function Blocks, I need to upgrade the unit firmware version, so I changed it to 1.10. After that I tried to program a simple two Sections program. I left the CPU for a week, then when I get back to it, I upload the program from the CPU. And the upload was SUCCESSFUL! No errors are shown. However all of the Rungs inside each Sections contains nothing. Even though the two Sections that I made before are still present. The program itself is still working though. If I open the previously saved project, going online and do variable controlling, I'm still able to do so. Has anybody experienced this before? Any suggestions / solutions? Thank you...

I have an interesting problem. On my NQ HMI, I am changing one bit of the alarm word to true. The first time I do this, one alarm becomes active, and appears in my alarm list on my HMI. Then when I change the bit back to zero, the alarm becomes inactive. Then when I make the bit true again, the alarm does NOT become active again. Nor does a new alarm appear at the top of the list. What do I need to do to make a fresh alarm appear in the list? Any input would be greatly appreciated. Thanks in advance.

Where can I safely download NQ designer? Thanks in advance.

Hi Guys I'm new to Omron PLC's and the NB HMI series terminals. I have a question regarding the status of a currently logged in user. What memory area bit can I check to see if a user is actually logged in ? Secondly, where can I find a document that shows the memory areas and any system words/bits ? I found bits and pieces here and there but nothing that shows the memory area layout in full. Regards Steve

Omron releases new 'SUPER-PLC' http://www.omron.com/media/press/2015/04/i0401.html

Omron Releases a new entry level NJ Sysmac CPU. This new controller targets application up to 0 or 2 EtherCAT Axis. http://www.omron.com/media/press/2015/04/i0401.html

Hi everyone, Im quite new into OPCs, I'm using adam 4015 6channel RTD module to measure temperatures and then connected to adam 4520, I would like to know how to connect the adam modules to cx designer (or if have to make any program in cx programmer) as i want to have a GUI of the temperature measurement. Thanks in advance

I know that I can printScreen screens one by one from the offline test in NB Designer. I was wondering if there was a way to automatically save-as-JPGs all screens in a project? (Just like you can do in CX Designer.)

I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!

Hi all, I recently got an old rima rs-12 counter stacker working. It was out in the plant working flawlessly until apparently the wires going into the power supply magically ripped themselves out. The operated hooked the wires up again but mixed them up(both black). When he powered up it instantly tripped a breaker inside the machine. He switched them and turned it back on to find that the flippers and pusher no longer work. The two omron IA221 input cards that control the flippers and pusher no longer have lights on them and I have found multiple open and short capacitors on the cards. The cards are 110VAC and I'm thinking the reversed polarity shouldn't have affected the cards, perhaps there is a greater problem I need to resolve before repairing and installing the cards. Could this have damaged the PLC itself? Any information will be greatly appreciated. I know it isn't really a PLC problem(or maybe it is.)

Is it possible to run the NJ simulator in Sysmac Studio and have it communicate with a real NA HMI? Thanks.

Hi, Is there any good documents out there on how to download to a NS15 Omron HMI from CX-Designer via Ethernet? Thanks, Andrew

Dear Mr/Ms, I using GT designer 3 to simulate have to use GX developer. But I can not install GX developer, just using GX works2. So Can I connect GX works 2 and GT designer 3 to simulate.. Please help me to slove this problem.. Thanks & best regards,