Search the Community

Showing results for tags 'modbus switch setting'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 263 results

  1. On Ethernet/Modbus-TCP, if a device is a Master, can it get polled by another Master? i.e. Can it act as a slave as well. Thanks, Arun
  2. I am aware that I can use a word lamp, set its display address to $SW10, and then on the HMI terminal screen, the image displayed will change depending on the language chosen. BUT when I change the language switch inside CXDesigner, the image shown in the designer area does not change. This is annoying because it means I have to go into "offline test" to check that my translation images (fancy text shown as a bitmap) are correct. Is it possible to make CXDesigner change the image shown, in the designer area, according to the language switch?

  3. How to set the language switch?

    ct8356 posted a topic in CX-Designer

    I have found the switch (in the label tab of an objects properties) that allows you to store 2 or more different languages within the label of a button. Now I want another button, within the HMI, to set this switch to a particular language. How do I do this?
  4. Is possible to comunicate an Eaton/Cutler Hammer INCOM/IMPACC network with a Modbus network ? Any experience ? Many thanks in advance.
  5. http://accautomation.ca/now-you-can-have-robust-data-logging-for-free-part-1/ YouTube overview: https://www.youtube.com/watch?v=6Xa2HYVOxE0 Robust PLC Data LoggerWith traditional loggers, software will read the memory of the PLC and store in a local computer. If the network stops or the PLC communication fails then the logging will stop.Creating a robust PLC data logger allows the communication to be stopped for a period of time without losing any of the data for collection. This is accomplished by storing the data locally on the PLC until communication is restored. All of the data is then read without loss. The amount of time that the connection can be lost will be dependent on the memory size of the PLC and the frequency of the data collected.This series will walk you through the steps to create and implement a robust PLC data logger using the following equipment and hardware. Automation Direct – Do-More – H2-DM1E PLC (Ethernet Modbus TCP)Do-more Designer 1.3 (Simulator instead of PLC mentioned above)Windows based computer running IISVisual Basic 6Regards, Garry http://www.accautomation.ca
  6. Hi All, We have a free Modbus Master Utility that you can use to test communcation to your Modbus Slave modules and PLC. Please let us know your feedback. http://www.icpdas-usa.com/documents/modbus/modbus_master_tool.zip If we can help with any future projects, with remote IO, controllers or communicaiton, please feel free to contact us.

  7. ModbusRTUdemos.zip

    RussB posted a file in PLC Sample Code

    Version

    601 downloads

    There are two Proficy ME projects in the zip file one for VersaMax and one setup for 90-30 CPU364 but is the same for all of the 90-30 processors, but read the Manual GFK-2220 to get the correct port information for your CPU and configuration. They are both working and well documented. They were done quite a while ago but I do not recall what version of PME is needed to open them. It is my recommendation that we all use the latest version. Good luck and have fun with it. R~ <))>(
  8. File Name: ModbusRTUdemos.zip File Submitter: RussB File Submitted: 17 Nov 2014 File Category: PLC Sample Code There are two Proficy ME projects in the zip file one for VersaMax and one setup for 90-30 CPU364 but is the same for all of the 90-30 processors, but read the Manual GFK-2220 to get the correct port information for your CPU and configuration. They are both working and well documented. They were done quite a while ago but I do not recall what version of PME is needed to open them. It is my recommendation that we all use the latest version. Good luck and have fun with it. R~ <))>( Click here to download this file
  9. Hi everyone, I'm facing problems implementing the Easy modbus-rtu master solution kindly provided by PMCR. i'm working with a CJ2M, and i have a SCU41-v1 connected to 5 AC10 series Parker drives, using modbus at Port 1 (Protocol Macro as indicated in the manual- 2 wire). Everything works ok after powering up the system. Unfortunately, after a few minutes, one of the parker drives freezes communication. An hour later....another. And so on. If I reboot the drive, powering it off and on, it starts communicating again. Any ideas about what might be causing this? Thanx.
  10. Hi everyone, I want to connect Allen Bradley 1756-L63 cpu (slave) via RS-232 port to ABB CI-853 (I don't have Prosoft MVI-56-MCM that can easily solve my situation). The only way that I found is application ModbusSlave.ACD (cig-ap129_-en-p.pdf). Do I need AIC+ converter (1761-NET-AIC) or can I connect with cable (DB9-to-RJ45)? Is there another way to make this connection? Regards, Luka
  11. Im trying to control a baldor VFD trough modbus RTU with cp1h/cp1wcif12 using the solution posted here which for me works really fine but the problem comes when I turn on the motor (500hp 440v), the cable gets induced and adds noise to the communication causing errors when reading. I already try to use shielded cable and it gets better but still causing errors. In the solution posted in the link above shows how to connect the cp1w-cif12 by connecting only SDA- and SDB+. So my question is, should I connect FG to the VFD rs-485 ground as well to reduce that noise? Any suggestions are welcome

  12. Version 3.11.5.0

    2922 downloads

    .NET class library for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server (Slave) devices via Ethernet.   For .NET Framework 2.0 - 4.8 projects. Does not require OPC or 3rd party drivers x86, x64, and Any CPU compatible Visual Studio.NET 2010, 2012, 2013, 2015, 2017, 2019, and 2022 compatible Most .NET targets are supported, including Web, Win Forms, WPF, console, and service apps Build Win Forms, console, and ASP.NET applications that run on Linux with Mono framework Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications  
  13. File Name: Modbus/TCP, RTU/ASCII Master Driver for .NET File Submitter: Automated Solutions File Submitted: 02 Mar 2011 File Category: Demo Software .NET Component for use in Visual Studio.NET to create HMI/SCADA apps that communicate with Modbus/TCP Server (Slave) devices via Ethernet. Does not require OPC or 3rd party drivers. x86, x64, and Any CPU compatible Visual Studio.NET 2005, 2008, 2010, 2012, and 2013 Compatible Most .NET targets are supported, including Web, Windows, console, and service apps. Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Runtime-free for qualified applications Click here to download this file